Guide to application of the machinery directive 2006/42/CE - July 2017 - citations-recitals

Submitted by root on Fri, 06/08/2018 - 12:48

DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance)

PREAMBLE TO THE MACHINERY DIRECTIVE - THE CITATIONS

§1 The citations

The citations included in the preamble to the Machinery Directive indicate the legal basis of the Directive, the opinions expressed by the relevant consultative Committee and the procedure according to which the Directive was adopted.

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 95 thereof,

Having regard to the proposal from the Commission, ⁽¹⁾

Having regard to the opinion of the European Economic and

Social Committee, ⁽²⁾

Acting in accordance with the procedure laid down in Article 251 of the Treaty, ⁽³⁾

OJ C 154 E, 29.5.2001, p. 164.
OJ C 311, 7.11.2001, p. 1.
Opinion of the European Parliament of 4 July 2002 (OJ C 271 E, 12.11.2003, p. 491), Council Common Position of 18 July 2005 (OJ C 251 E, 11.10.2005, p. 1) and Position of the European Parliament of 15 December 2005 (not yet published in the Official Journal). Council Decision of 25 April 2006.

§2 The legal basis of the Machinery Directive

The legal basis of the Machinery Directive is provided by Article 95 of the EC Treaty

(now replaced by Article 114 of the Treaty on the Functioning of the European Union - TFEU) that enables the EU to adopt measures to harmonise the legislation of the Member States in order to ensure the establishment and functioning of the internal market. Such measures must take as a base a high level of protection of the health and safety of people and of the environment.

The Machinery Directive thus has a dual objective: to permit the free movement of machinery within the internal market whilst ensuring a high level of protection of health and safety.

Following the proposal by the Commission, the Machinery Directive was adopted by the European Parliament and the Council, after consulting the Economic and Social Committee, according to the co-decision procedure set out in Article 251 of the EC Treaty (now referred to as the ordinary legislative procedure in Article 294 of the TFEU).

The footnotes to the citation give the references and dates of the successive steps of the procedure. (The Position of the European Parliament of 15 December 2005 was not published in the OJEU).

PREAMBLE TO THE MACHINERY DIRECTIVE - THE RECITALS

§3 The recitals

The recitals introduce the main provisions of the Directive and present the reasons for their adoption. Several of the recitals explain the changes that have been made in the new Machinery Directive compared with Directive 98/37/EC.

The recitals do not have legal force as such and do not usually figure in the national legislation implementing the Directive. However, they help to understand the Directive, in particular, by clarifying the meaning of certain provisions. When interpreting the text of the Directive, the Courts may take the recitals into consideration in order to ascertain the intention of the legislators.

In the following comments, reference is made to the Articles and Annexes of the Directive introduced by each of the recitals. For further explanations, please refer to the comments on the Articles and Annexes concerned.

(1) Directive 98/37/EC of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery ⁽⁴⁾ codified Directive 89/392/EEC ⁽⁵⁾. Now that new substantial amendments are being made to Directive 98/ 37/EC, it is desirable, in order to clarify matters, that that Directive should be recast.

⁽⁴⁾ OJ L 207, 23.7.1998, p. 1. Directive as amended by Directive 98/79/EC (OJ L 331, 7.12.1998, p. 1).

§4 The History of the Machinery Directive

The first recital recalls that Directive 2006/42/EC is not an entirely new Directive but is based on Directive 98/37/EC^{^[1]} which codified the Machinery Directive 89/392/EEC^{^[2]} as amended. Codification means bringing into one legal text the original Directive and its successive amendments:

Directive 91/368/EEC^{^[3]} extended the scope of the Machinery Directive to interchangeable equipment, mobile machinery and machinery for lifting goods. Parts 3, 4 and 5 were added to Annex I.
Directive 93/44/EEC^{^[4]} extended the scope of the Machinery Directive to safety components and machinery for lifting and moving persons. Part 6 was added to Annex I.
Directive 93/68/EEC^{^[5]} introduced harmonised provisions relating to the CEmarking.

Directive 98/37/EC was subject to a minor amendment by Directive 98/79/EC relating to the exclusion of medical devices.

Directive 98/37/EC remains in force until 29 December 2009.

Directive 2006/42/EC is termed a recast of the Machinery Directive since the modifications are presented in the form of a new Directive.

Directive 2009/127/EC modified the scope of Directive 2006/42/EC by adding environmental protection risks for “machinery for pesticide application”. It introduced a new section in Annex I part 2 to deal with this aspect. Note that it did not extend the scope of the Directive, with respect to the environment, to other types of machinery.

(2)

The machinery sector is an important part of the engineering industry and is one of the industrial mainstays of the Community economy. The social cost of the large number of accidents caused directly by the use of machinery can be reduced by inherently safe design and construction of machinery and by proper installation and maintenance.

§5 The economic and social importance of the Machinery Directive

The second recital underlines the economic and social importance of the dual objectives of the Machinery Directive. The establishment of a harmonised regulatory framework for the design and construction of machinery is of vital economic importance to the European engineering industry. At the same time, safer machinery makes an important contribution to the reduction of the social cost of accidents and damage to health, both in the workplace and in the home.

(3)

Member States are responsible for ensuring the health and safety on their territory of persons, in particular of workers and consumers and, where appropriate, of domestic animals and goods, notably in relation to the risks arising out of the use of machinery.

§6 Health and safety

The protection of health and safety is both a fundamental duty and a prerogative of the Member States. Since the Machinery Directive harmonises the health and safety requirements for the design and construction of machinery at EU level, the responsibility of Member States to protect health and safety of people with regard to the risks associated with machinery implies ensuring that the requirements of the Machinery Directive are correctly applied.

(4)

In order to ensure legal certainty for users, the scope of this Directive and the concepts relating to its application should be defined as precisely as possible.

§7 Definitions

The fourth recital underlines the fact that the new Machinery Directive provides a clearer presentation of the scope and includes definitions of the key terms and concepts used in the text. Definitions of terms used in the Directive are given in Article 2 and additional definitions of concepts relating to the essential health and safety requirements are given in sections 1.1.1, 3.1.1 and 4.1.1 of Annex I.

(5) The Member States' mandatory provisions governing construction site hoists intended for lifting persons or persons and goods, which are often supplemented by de facto compulsory technical specifications and/or by voluntary standards, do not necessarily lead to different levels of health and safety but, because of their disparities, do nevertheless constitute barriers to trade within the Community. Moreover, the national systems for the conformity assessment and certification of these machines diverge considerably. It is therefore desirable not to exclude from the scope of this Directive construction site hoists intended for lifting persons or persons and goods.

§8 Inclusion of construction site hoists

Construction site hoists, that were previously excluded from the scope of the Machinery Directive 98/37/EC and the Lifts Directive 95/16/EC, are lifting appliances intended to be temporarily installed for transporting persons or persons and materials to the different levels of a building during construction or repair. The fifth recital explains that such construction site hoists are no longer excluded from the scope of the Machinery Directive. Certain new essential health and safety requirements relating to machinery serving fixed landings have been added to Annex I to deal with specific risks associated with this type of machinery.

With respect to the conformity assessment procedure applicable to construction site hoists, it should also be noted that construction site hoists involving a hazard of falling from a vertical height of more than three metres are included among the devices for the lifting of persons or of persons and goods listed in Annex IV, item 17.

(6) It is appropriate to exclude from the scope of this Directive weapons, including firearms, that are subject to Council Directive 91/477/EEC of 18 June 1991 on control of the acquisition and possession of weapons⁽⁶⁾; the exclusion of firearms should not apply to portable cartridge-operated fixing and other impact machinery designed for industrial or technical purposes only. It is necessary to provide for transitional arrangements enabling Member States to authorise the placing on the market and putting into service of such machinery manufactured in accordance with national provisions in force upon adoption of this Directive, including those implementing the Convention of 1 July 1969 on the Reciprocal Recognition of Proofmarks on Small Arms. Such transitional arrangements will also enable the European standardisation organisations to draft standards ensuring the safety level based on the state of the art.

(6)

OJ L 256, 13.9.1991, p. 51.

§9 Inclusion of portable cartridge-operated fixing and other impact machinery

Weapons, including firearms, are excluded from the scope of the Machinery Directive – see §51: comments on Article 1 (2) (d). The sixth recital explains that this exclusion is to be understood in light of the scope of the EU legislation on the control of weapons, which does not apply to equipment designed for industrial or technical purposes only.

Cartridge-operated fixing and other cartridge-operated impact machinery designed for industrial or technical purposes that was excluded from the original Machinery Directive by amending Directive 91/368/EEC, is thus reintroduced into the scope of the new Machinery Directive. In addition, certain essential health and safety requirements relating to specific risks associated with portable fixing and other impact machinery have been added to Annex I. It should be noted that these requirements apply both to cartridge-operated fixing and impact machinery and fixing and impact machinery using other sources of energy – see §280: comments on section 2.2.2 of Annex I. With respect to the conformity assessment of such machinery, it should also be noted that portable cartridge-operated fixing and other cartridge-operated impact machinery is listed in Annex IV, item 18 – see §388: comments on Annex IV, item 18.

For the transitional arrangements mentioned in the last sentence of the sixth recital – see §154: comments on Article 27.

(7) This Directive does not apply to the lifting of persons by means of machines not designed for the lifting of persons. However, this does not affect the right of Member States to take national measures, in accordance with the Treaty, with respect to such machines, with a view to implementing Council Directive 89/655/EEC of 30 November 1989 concerning the minimum safety and health requirements for the use of work equipment by workers at work (second individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC)⁽⁷⁾.

⁽⁷⁾ OJ L 393, 30.12.1989, p. 13. Directive as last amended by Directive 2001/45/EC of the European Parliament and of the Council (OJ L 195, 19.7.2001, p. 46).

§10 Equipment intended for lifting persons with machinery designed for lifting goods

Exceptional use of machinery designed for lifting goods for the purpose of lifting persons may be subject to national regulations in the framework of provisions implementing Directive 2009/104/EC – see §140: comments on Article 15. Recital 7 implies that equipment placed on the market for such exceptional use with machinery designed for lifting goods is not in the scope of the Machinery Directive. Placing on the market of such equipment may therefore be subject to national regulations.

Equipment for such exceptional use should be distinguished from interchangeable equipment designed to be assembled with lifting machinery in order to confer a new function for lifting persons. Such interchangeable equipment is subject to the machinery Directive^{^[6]} – see §388: comments on Annex IV, item 17.

(8) In relation to agricultural and forestry tractors, the provisions of this Directive concerning the risks currently not covered by Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units ⁽¹⁾ should no longer apply when such risks are covered by Directive 2003/37/EC.

(1) OJ L 171, 9.7.2003, p. 1. Directive as last amended by Commission Directive 2005/67/EC (OJ L 273, 19.10.2005, p. 17).

§11 Agricultural and forestry tractors

The eighth recital refers to the exclusion of agricultural and forestry tractors from the scope of the Machinery Directive for the risks covered by Directive 2003/37/EC. This Directive was replaced by Regulation (EU) No 167/2013 which modified the Machinery Directive to exclude completely Agricultural and Forestry Tractors – see §53: comments on the first indent of Article 1 (2) (e).

Market surveillance is an essential instrument inasmuch as it ensures the proper and uniform application of Directives. It is therefore appropriate to put in place the legal framework within which market surveillance can proceed harmoniously.
Member States are responsible for ensuring that this Directive is effectively enforced on their territory and that the safety of the machinery concerned is, as far as possible, improved in accordance with its provisions. Member States should ensure their capacity to carry out effective market surveillance, taking account of guidelines developed by the Commission, in order to achieve the proper and uniform application of this Directive.

§12 Market surveillance

The term “market surveillance” designates the activity of the authorities of the Member States checking the conformity of products subject to the Directive after they have been placed on the market or put into service and taking the necessary action to deal with non-compliant products. The ninth and tenth recitals introduce several provisions in the new Machinery Directive which establish a stronger legal basis for market surveillance and enforcement action and also provide for the necessary cooperation between the Members States and the Commission in this area – see §93 to §102: comments on Articles 4, §118: comments on Article 9, §122 to §126: comments on Article 11 and §144: comments on Article 19.

In the context of market surveillance, a clear distinction should be established between the disputing of a harmonised standard conferring a presumption of conformity on machinery and the safeguard clause relating to machinery.

§13 Formal objection to standards and the safeguard clause

The eleventh recital indicates that the procedure for disputing a harmonised standard (known as a formal objection) and the safeguard procedure for dealing with noncompliant and dangerous products are different procedures that are set out in distinct Articles of the Directive – see §119 to §121: comments on Articles 10, and §122 to §126: comments on Article 11.

The putting into service of machinery within the meaning of this Directive can relate only to the use of the machinery itself for its intended purpose or for a purpose which can reasonably be foreseen. This does not preclude the laying down of conditions of use external to the machinery, provided that it is not thereby modified in a way not specified in this Directive.

§14 Regulations on use of machinery

The twelfth recital clarifies the notion of putting into service of machinery that is regulated by the Machinery Directive – see §86: comments on Article 2 (k). Putting into service is to be distinguished from use of machinery that can be regulated by the Member States, in particular, within the framework of the EU legislation on the use of work equipment provided that such national regulations do not conflict with the provisions of this Directive – see §139 and §140: comments on Article 15.

It is also necessary to provide for an adequate mechanism allowing for the adoption of specific measures at Community level requiring Member States to prohibit or restrict the placing on the market of certain types of machinery presenting the same risks to the health and safety of persons either due to shortcomings in the relevant harmonised standard(s) or by virtue of their technical characteristics, or to make such machinery subject to special conditions. In order to ensure the appropriate assessment of the need for such measures, they should be taken by the Commission, assisted by a committee, in the light of consultations with the Member States and other interested parties. Since such measures are not directly applicable to economic operators, Member States should take all necessary measures for their implementation.

§15 Measures to deal with groups of hazardous machinery presenting the same risks

The safeguard procedure set out in Article 11 requires Member States to take the necessary measures to deal with particular models of machinery that fail to comply with the requirements of the Directive and threaten the health and safety of persons. The thirteenth recital introduces a provision which enables measures to be taken at EU level if it becomes clear that an entire group of similar models of machinery give rise to the same risk – see §118: comments on Article 9.

The measures concerned must be submitted to the Machinery Committee according to the regulatory procedure with scrutiny – see §147: comments on Article 22.

The essential health and safety requirements should be satisfied in order to ensure that machinery is safe; these requirements should be applied with discernment to take account of the state of the art at the time of construction and of technical and economic requirements.

§16 The state of the art

Recital (14) introduces the concept of ‘the state of the art’ which shall be taken into account when applying the essential health and safety requirements (EHSRs) set out in Annex I. This concept is very important as it means that the EHSRs are not absolute requirements irrespective of economic cost and technical possibilities available on the market for manufacturers – see §161 and §162: comments on General Principle 3, Annex I.

Where the machinery may be used by a consumer, that is to say, a non-professional operator, the manufacturer should take account of this in the design and construction. The same applies where a machine is normally used to provide a service to a consumer.

§17 Machinery for consumer use

The Machinery Directive applies both to machinery for use by workers at work and to machinery for use by consumers or providing a service to consumers, i.e. where the consumer either uses the item or would be directly affected by any defect. In general, the design and construction of machinery must take account of the intended use. Recital 15 stresses that the machinery manufacturer must consider whether the machinery is intended to be used by a professional or a non-professional operator or is intended to provide a service to consumers. The Directive includes a specific requirement relating to the drafting of the instructions for machinery intended for use by non-professional operators – see §259: comments on section 1.7.4.1 (d) of Annex I.

Although the requirements of this Directive do not apply to partly completed machinery in their entirety, it is nevertheless important that the free movement of such machinery be guaranteed by means of a specific procedure.

§18 Partly completed machinery

Recital 16 introduces the concept of partly completed machinery – see §46: comments on Articles 1 (1) (g) and 2 (g). The placing on the market of partly completed machinery is subject to a specific procedure – see §131: comments on Article 13. Partly completed machinery cannot comply fully with the essential health and safety requirements set out in Annex I, since certain of the risks may result from the fact that the machinery is not complete or from the interface between the partly completed machinery and the machinery or assembly of machinery into which it is to be incorporated. However, the manufacturer of partly completed machinery must state, in a Declaration of Incorporation, which of the essential health and safety requirements he has fulfilled – see §385: comments on Annex II 1 B, and §394: comments on Annex VII, B.

For trade fairs, exhibitions and such like, it should be possible to exhibit machinery which does not satisfy the requirements of this Directive. However, interested parties should be properly informed that the machinery does not conform and cannot be purchased in that condition.

§19 Trade fairs and exhibitions

Recital 17 introduces the provision that enables manufacturers to exhibit new models of machinery at trade fairs and exhibitions before the conformity of such products with the Machinery Directive has been assessed or to exhibit machinery with certain elements such as, for example, guards removed for demonstration purposes. In such cases, the exhibitor must display an appropriate sign and take adequate safety measures to protect persons from the risks presented by the exhibited machinery – see §108: comments on

Article 6 (3).

This Directive defines only the essential health and safety requirements of general application, supplemented by a number of more specific requirements for certain categories of machinery. In order to help manufacturers to prove conformity to these essential requirements, and to allow inspection of conformity to the essential requirements, it is desirable to have standards that are harmonised at Community level for the prevention of risks arising out of the design and construction of machinery. These standards are drawn up by private-law bodies and should retain their nonbinding status.

§20 The New Approach and the New Legislative Framework

Recital 18 recalls that the Machinery Directive relies on the regulatory method known as the “New Approach to technical harmonization and standards”. The legislation itself sets out the mandatory essential health and safety requirements that products placed on the EU market must fulfil and the procedures for assessing their conformity – see §103: comments on Articles 5 (1) (a), and §163: comments on General Principle 4 of Annex I.

Detailed technical solutions for meeting these essential health and safety requirements are given in European harmonised standards. Application of harmonised standards remains voluntary, but confers a presumption of conformity with the essential health and safety requirements they cover – see §87: comments on Articles 2 (l), and §110: comments on Article 7 (2).

The "New Approach" has been improved and updated by the "New Legislative Framework", through a set of legislative acts such as Regulation (EC) No 765/2008 and Decision 768/2008/EC^{^[7]}.

(19) In view of the nature of the risks involved in the use of machinery covered by this Directive, procedures for assessing conformity to the essential health and safety requirements should be established. These procedures should be devised in the light of the extent of the danger inherent in such machinery. Consequently, each category of machinery should have its appropriate procedure in conformity with Council Decision 93/465/EEC of 22 July 1993 concerning the modules for the various phases of the conformity assessment procedures and the rules for the affixing and use of the CE conformity marking, which are intended to be used in the technical harmonisation directives ⁽²⁾, taking account of the nature of the verification required for such machinery.

⁽²⁾ OJ L 220, 30.8.1993, p. 23.

§21 Conformity assessment

Recital 19 refers to the procedures for the person responsible for the CE marking, assessing the conformity of machinery with the essential health and safety requirements – see §127 to §130: comments on Article 12 – and the rules for the CE marking – see §141: comments on Article 16.

Manufacturers should retain full responsibility for certifying the conformity of their machinery to the provisions of this Directive. Nevertheless, for certain types of machinery having a higher risk factor, a stricter certification procedure is desirable.

§22 Annex IV machinery

The conformity assessment procedure applicable to a given product depends on whether or not it belongs to one of the categories listed in Annex IV which are considered to have a high risk factor or which serve a critical protective function. The different conformity assessment procedures are set out in Annexes VIII, IX and X and the rules for their selection are given in Article 12.

The CE marking should be fully recognised as being the only marking which guarantees that machinery conforms to the requirements of this Directive. All other markings which are likely to mislead third parties as to the meaning or the form of the CE marking, or both, should be prohibited.
In order to ensure the same quality for the CE marking and the manufacturer's mark, it is important that they be affixed according to the same techniques. In order to avoid confusion between any CE markings which might appear on certain components and the CE marking corresponding to the machinery, it is important that the latter marking be affixed alongside the name of the person who has taken responsibility for it, namely the manufacturer or his authorised representative.

§23 The CE-marking

Recitals 21 and 22 introduce the provisions relating to the CE-marking – see §141: comments on Article 16, §250: comments on section 1.7.3 of Annex I, and §387: comments on Annex III.

The manufacturer or his authorised representative should also ensure that a risk assessment is carried out for the machinery which he wishes to place on the market. For this purpose, he should determine which are the essential health and safety requirements applicable to his machinery and in respect of which he must take measures.

§24 Risk assessment

Recital 23 refers to the requirement in Annex I on the risk assessment for the machinery which determines the application of the essential health and safety requirements – see §158 and §159: comments on General Principle 1 of Annex I.

It is essential that, before drawing up the EC declaration of conformity, the manufacturer or his authorised representative established in the Community should prepare a technical construction file. However, it is not essential that all documentation should be permanently available in material form, but it must be possible to make it available on request. It need not include detailed plans of subassemblies used for the manufacture of machinery, unless knowledge of such plans is essential in order to ascertain conformity with the essential health and safety requirements.

§25 The technical construction file

The manufacturer’s technical construction file referred to in Recital 24 is both a means to enable the market surveillance authorities to check the conformity of machinery after it has been placed on the market and a means for the manufacturer to demonstrate the conformity of his product – see §103: comments on Article 5 (1) (b), §383: comments on Annex II 1 A (2), and §391 to §393: comments on Annex VII A.

The addressees of any decision taken under this Directive should be informed of the reasons for such a decision and of the legal remedies open to them.

§26 Legal remedies

Recital 25 introduces the provisions relating to the rights of manufacturers or other stakeholders subject to decisions taken under the Machinery Directive – see §135: comments on Articles 14 (6), and §145: comments on Article 20.

Member States should provide for penalties applicable to infringements of the provisions of this Directive. Those penalties should be effective, proportionate and dissuasive.

§27 Enforcement

Recital 26 is a reminder that the national authorities in charge of enforcement of the provisions of the Machinery Directive (the market surveillance authorities) must be able to impose appropriate penalties if those provisions are not correctly applied. The penalties must be foreseen by the national laws and regulations transposing the provisions of the Directive into national law – see §153: comments on Article 26.

(27) The application of this Directive to a number of machines intended for lifting persons requires a better delimitation of the products covered by this Directive with respect to those covered by Directive 95/16/EC of the European Parliament and of the Council of 29 June 1995 on the approximation of the laws of the Member States relating to lifts.⁽¹⁾ A redefinition of the scope of the latter Directive is thus deemed necessary. Directive 95/16/EC should therefore be amended accordingly.

⁽¹⁾ OJ L 213, 7.9.1995, p. 1. Directive as amended by Regulation (EC) No 1882/2003 (OJ L 284, 31.10.2003, p. 1).

§28 Amendment of the Lifts Directive

Recital 27 explains that the new Machinery Directive 2006/42/EC includes an amendment of the Lifts Directive 95/16/EC (replaced by Directive 2014/33/EC as of 20 April 2016) in order to clarify the borderline between the scopes of the two Directives – see §151: comments on Article 24.

(28) Since the objective of this Directive, namely, to lay down the essential health and safety requirements in relation to design and manufacture in order to improve the safety of machinery placed on the market, cannot be sufficiently achieved by the Member States and can be better achieved at Community level, the Community may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty. In accordance with the principle of proportionality, as set out in that Article, this Directive does not go beyond what is necessary in order to achieve that objective.

§29 Subsidiarity and proportionality

Recital 28 is a justification of the Machinery Directive with respect to the principles of subsidiarity and proportionality set out in Article 5 of the EC Treaty (now Article 5 of the Treaty on European Union – TEU). According to these principles, the EU shall take action only if the same objectives cannot be better achieved by the action of the Member States. It is clear that without the Machinery Directive, manufacturers of machinery would have to apply different rules and procedures for machinery safety in each Member State, which would both constitute a serious obstacle to the internal market and be a less effective means of improving machinery safety.

(29) In accordance with point 34 of the Interinstitutional Agreement on better lawmaking,⁽²⁾ Member States are encouraged to draw up, for themselves and in the interests of the Community, their own tables illustrating, as far as possible, the correlation between this Directive and the transposition measures, and to make them public.

⁽²⁾ OJ C 321, 31.12.2003, p. 1.

§30 National correlation tables

Recital 29 refers to an agreement between the European Parliament, the Council and the Commission on improving the quality and transparency of EU law-making. Under the heading of better transposition and application, Member States are encouraged to publish correlation tables showing the relationship between the provisions of the Directive and the measures transposing them into national law. This is important since, while it is the national transposition measures that have force of law, in the dialogue between economic actors, the text of the Machinery Directive itself naturally provides a common reference. A correlation table must also be communicated by the Member States to the Commission together with the text of the measures transposing the Directive into national law – see §153: comments on Article 26.

(30) The measures necessary for the implementation of this Directive should be adopted in accordance with Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission,⁽³⁾

⁽³⁾ OJ L 184, 17.7.1999, p. 23.

§31 The Machinery Committee

Recital 30 refers to certain measures that can be taken by the Commission after consulting the Machinery Committee – see §116: comments on Articles 8, and §147: comments on Article 22.

[1] OJ L 183, 29.6.1989, p. 9.

[2] Directive 98/37/EC of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery. OJ L 207, 27.7.1998, p.1.

[3] OJ L 198, 22.7.1991, p. 16.

[4] OJ L 175, 19.7.1993, p. 12.

[5] OJ L 220, 31.8.1993, p. 1.

[6] See guidance on Interchangeable equipment for lifting persons and equipment used with machinery designed for lifting goods for the purpose of lifting persons.

[7] See http://ec.europa.eu/growth/single -market/goods/new -legislative -framework/ and "The 'Blue Guide' on the implementation of EU product rules" http://ec.europa.eu/DocsRoom/documents/12661 .

Language English

Read more about Guide to application of the machinery directive 2006/42/CE - July 2017 - citations-recitals

Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification

Submitted by root on Wed, 06/06/2018 - 22:17

ANNEX IV

Categories of machinery to which one of the procedures referred to in Article 12(3) and (4) must be applied

1. Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:

1.1. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed;

1.2. sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage;

1.3 sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading;

1.4. sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading.

2. Hand-fed surface planing machinery for woodworking.

3. Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking.

4. Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:

4.1. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece;

4.2. sawing machinery with blade(s) assembled on a carriage with reciprocating motion..

5. Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics.

6. Hand-fed tenoning machinery with several tool holders for woodworking.

7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics.

8. Portable chainsaws for woodworking.

9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.

10. Injection or compression plastics-moulding machinery with manual loading or unloading.

11. Injection or compression rubber-moulding machinery with manual loading or unloading.

12. Machinery for underground working of the following types:

12.1. locomotives and brake-vans;

12.2. hydraulic-powered roof supports.

13. Manually loaded trucks for the collection of household refuse incorporating a compression mechanism.

14. Removable mechanical transmission devices including their guards.

15. Guards for removable mechanical transmission devices.

16. Vehicle servicing lifts.

17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres.

18. Portable cartridge-operated fixing and other impact machinery.

19. Protective devices designed to detect the presence of persons.

20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11.

21. Logic units to ensure safety functions.

22. Roll-over protective structures (ROPS).

23. Falling-object protective structures (FOPS).

§388 Categories of machinery that may be subject to one of the conformity assessment procedures involving a Notified Body

Annex IV sets out the list of categories of machinery that may be subject to one of the two conformity assessment procedures involving a Notified Body: EC type-examination or Full quality assurance. These categories include machinery in the broad sense – see §33: comments on Article 2. Machinery belonging to one of the categories listed in Annex IV may also be subject to the procedure for assessment of conformity with internal checks when it is manufactured in accordance with harmonised standards that cover all of the applicable EHSRs – see §129 and §130: comments on Article 12 (3) and (4).

The list set out in Annex IV is exhaustive, in other words, only the machinery belonging to the categories listed is subject to the conformity assessment procedures set out in Article 12 (3) and (4). Machinery belonging to categories not listed in Annex IV, even if it is similar or presents similar hazards to the categories listed, is subject only to the procedure for assessment of conformity with internal checks – see §128: comments on Article 12 (2).

Items 1 to 8

Item 1 covers only circular saws for working with wood and analogous materials or for working with meat or analogous materials belonging to the categories referred to in items 1.1 to 1.4.

It should also be noted that not all circular saws for working wood are concerned; for example, sawing machinery with a blade moved by hand during cutting (such as some mitre saws) are not referred to in Annex IV.

Materials analogous to wood include, for example, chipboard, fibreboard, plywood (and also these materials when they are covered with plastic or light alloy laminates), cork, bone, rigid rubber or plastic. On the other hand, stone, concrete and similar materials requiring an abrasive type of cutting tool are not considered as materials analogous to wood.

Materials analogous to meat include fish and frozen or deep-frozen food.

Items 1.3, 1.4, 3 and 4 refer to manual loading and/or unloading. Manual loading and/or unloading occurs when the operator places workpieces directly in the feed device or workpiece support device and removes them directly from that device, so that it is possible for the operator to have direct contact with the workpiece while it is in contact with the tool. Machinery is not considered to have manual loading or unloading if it is equipped with a feed device or a device for loading and unloading workpieces (such as, for example, a conveyor) such that the tools are out of reach of the user while the device is being used and the machinery cannot be operated without the device.

Items 1.1, 2, 6 and 7 refer to manual feed or hand fed machinery. Manual feed or hand feed occurs when either the workpiece or the tool is manually moved during machining so that it is possible for the operator to come into contact with the tool. The same applies to the machinery with a manually operated reciprocating saw-bench or carriage referred to in item 1.2.

The combined woodworking machinery referred to in item 5 is machinery designed to carry out any combination of the functions referred to in items 1 to 4 and 7, with manual removal of the workpiece between each operation - see §210: comments on section 1.3.5 of Annex I. Only combined machinery carrying out functions referred to in items 1 to 4 and 7 is subject to item 5 of Annex IV, however such machinery may also carry out other additional functions. Since the necessary protective measures are often common to several or all of the combined functions, the EC type-examination or the assessment of the full quality assurance system for such combined woodworking machinery shall always concern the entire machinery.

The vertical spindle moulding machines referred to in item 7 have a spindle passing through the table and a drive motor situated beneath the table. Routing machinery with a spindle located completely above the table is not covered by item 7.

Item 9

The presses for cold working of metals referred to in item 9 are presses the intended or foreseeable use of which includes the possibility of the operator placing or removing workpieces between the tools with his hands without the use of integrated ancillary handling devices. The term 'cold working' refers to the shaping of metal without heating, usually at room temperature. The term 'metal' refers to material in sheet, rolled or forged form.

Item 9 only applies to presses with movable working parts having both of the two following characteristics:

- a travel greater than 6 mm, and

- a closing speed greater than 30 mm/s.

When establishing the closing speed of mechanical presses, the highest instantaneous speed reached by the slide (in general, at about the mid-point of its travel) should be taken into consideration.

Item 9 does not cover other kinds of machinery for cold working of metals such as, for example:

- sintering presses,

- alligator or guillotine shears,

- riveting, stapling or stitching machines,

- assembly presses,

- bending machines,

- straightening presses,

- turret punch presses,

- extruder presses,

- drop forging or drop stamping presses,

- blow forging presses,

- isostatic presses.

Items 10 and 11

The plastics and rubber moulding machinery referred to in items 10 and 11 is machinery designed for working polymers, such as thermoplastics and thermosets, or rubber, by injection or compression. Loading and unloading refers only to placing and removal of material or parts in and out of the mould. Loading and unloading is not considered as manual if:

- the machinery is designed to operate only with robot or manipulator equipment,

- the machinery is fitted with loading and unloading devices such that it is not possible to operate the machinery without those devices.

In all other cases, loading and unloading shall be considered as manual.

Item 12

Locomotives for underground working referred to in item 12.1 are self-powered vehicles running on a track of one or two rails situated above or under the vehicle for use in mines or other underground workings, designed for hauling or transporting persons, materials or mineral. Brake vans are railway vehicles for underground working equipped with a brake which can be applied by the operator.

Hydraulic-powered roof supports referred to in item 12.2 are usually self-advancing supports used to support the roof at a mine face. They include:

- one support unit under adjacent control;

- several support units under group control;

- entire mine face support systems under central control.

Tunnelling machines are not covered by item 12.

Item 13

An explanation of the term 'manual loading' with respect to manually loaded trucks for the collection of household refuse incorporating a compression mechanism referred to in item 13 is given in a specific guidance document. The document also shows examples of machinery that is within the scope of item 13 and machinery that is outside the scope of item 13.

In general, the vehicle itself is excluded from the scope of the Machinery Directive, so the machinery referred to in item 13 is the refuse collection and compression equipment mounted on the chassis – see §37: comments on the third indent of Article 2 (a), and §54: comments on Article 1 (2) (e).

Language English

Read more about Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification

Guide to application of machinery directive - § 387 - ANNEX III CE marking

Submitted by root on Wed, 06/06/2018 - 00:10

ANNEX III

CE marking

The CE conformity marking shall consist of the initials ‘CE’ taking the following form:

If the CE marking is reduced or enlarged the proportions shown in the above drawing must be respected.

The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm. The minimum dimension may be waived for small-scale machinery.

The CE marking must be affixed in the immediate vicinity of the name of the manufacturer or his authorised representative, using the same technique.

Where the full quality assurance procedure referred to in Article 12(3)(c) and 12(4)(b) has been applied, the CE marking must be followed by the identification number of the notified body.

§387 The form of the CE marking

The provisions relating to the CE marking set out in Article 16 apply together with the provisions of Regulation (EC) 765/2008 – see §141: comments on Article 16. Annex III sets out the mandatory graphic form of the CE marking. The CE marking consists only of the letters "CE" with the graphic form shown in the diagram – the grid and dotted lines are only included in the diagram to help to define the shape of the letters and must not be reproduced in the CE marking.

The fourth paragraph of Annex III relating to the location and technique of the CE marking must be applied in conjunction with the general requirements on marking of machinery – see §250: comments on section 1.7.3 of Annex I.

The last paragraph of Annex III applies only to machinery belonging to one of the categories listed in Annex IV for which the full quality assurance procedure has been applied – see §129, §130 and §132: comments on Article 12 (3) and (4). In that case, the CE marking must be followed by the four-digit identification number of the Notified Body that has approved the manufacturer's full quality assurance system – see §133: comments on Article 14. For such machinery, the CE marking and the identification number of the Notified Body may only be affixed once the manufacturer has been notified of the approval of his full quality assurance system by the Notified Body – see §404: comments on section 2.3 of Annex X. These markings can no longer be affixed if the approval of the full quality assurance system has been suspended or withdrawn by the Notified Body - see §406: comments on section 3 of Annex X.

The identification number of the Notified Body must not be marked on machinery for which the EC type-examination procedure has been followed.

Language English

Read more about Guide to application of machinery directive - § 387 - ANNEX III CE marking

Guide to application of the machinery directive 2006/42/CE - July 2017

Submitted by root on Tue, 06/05/2018 - 23:31

you can download the PDF guide from the following link

http://www.industry-finder.com/download/2006-42-ce-machinery-directive/machinery-guidelines/Edition_2.1_of_the_MD_2006-42-EC_Guide_FINAL.pdf

http://www.industry-finder.com/download/2006-42-ce-machinery-directive/machinery-guidelines/images/machinery-directive-actors.jpg

Industrial Transformation and Advanced Value Chains

Advanced Engineering and Manufacturing Systems

Guide to application of the Machinery Directive 2006/42/EC

Edition 2.1 – July 2017

(Update of 2^nd Edition)

Introduction to the Edition 2.1 – July 2017 (Update of the 2^nd Edition)

Directive 2006/42/EC is a revised version of the Machinery Directive, the first version of which was adopted in 1989. The new Machinery Directive has been applicable since 29^th December 2009. The Directive has the dual aim of harmonising the health and safety requirements applicable to machinery on the basis of a high level of protection of health and safety, while ensuring the free circulation of machinery on the EU market. The revised Machinery Directive does not introduce radical changes compared with the previous versions. It clarifies and consolidates the provisions of the Directive with the aim of improving its practical application.

While the revised Machinery Directive was being discussed by the Council and the European Parliament, the Commission agreed to prepare a new Guide to its application. The purpose of the Guide is to provide explanations of the concepts and requirements of Directive 2006/42/EC in order to ensure uniform interpretation and application throughout the EU. The Guide also provides information about other related EU legislation. It is addressed to all of the parties involved in applying the Machinery Directive, including machinery manufacturers, importers and distributors, Notified Bodies, standardisers, occupational health and safety and consumer protection agencies and officials of the relevant national administrations and market surveillance authorities. It may also be of interest to lawyers and to students of EU law in the fields of the internal market, occupational health and safety and consumer protection.

It should be stressed that only the Machinery Directive and the texts implementing its provisions into national law are legally binding.

The 2^nd Edition of the Guide was endorsed by the Machinery Committee on 2 June 2010. In comparison with the 1^st Edition, it was completed with comments on Annexes III to XI of the Machinery Directive. Some errors noticed by readers have been corrected. Legal references and terms have been updated in line with the Lisbon Treaty - in particular, where the Directive refers to 'the Community', the Guide now refers to 'the EU'.

Following discussion with the industry, the comments relating to chains, ropes and webbing for lifting purposes in §44, §330, §340, §341, and §357 have been revised in order to clarify the practical application of the requirements relating to these products.

The 2^nd Edition also includes a thematic index to facilitate consultation of the Guide. The numbering of the sections of the Guide is unchanged.

The Guide takes account of the amendment to Directive 2006/42/EC introduced by Regulation (EC) No 569/2009 relating to the regulatory procedure with scrutiny for the Machinery Committee. It also takes account of the provisions of Regulation (EC) No 765/2008 relating to market surveillance, which apply in a complementary way.

This Update to the 2^nd Edition of the Guide, further named Edition 2.1, has been completed to include the amendments made to the Machinery Directive by the Directive 2009/127/EC on Pesticide Equipment and the Regulation (EU) No 167/2013 on the approval and market surveillance of agricultural and forestry vehicles (Tractors). In addition, guidance on “partly completed machinery” and “assemblies” has been added, as well as inserting clarifications and corrections to the concepts of "safety components'', "new and used machinery", "marking of machinery". A number of key guidance decisions of the Machinery Working Group have been incorporated into this text.

The Guide is published on the Commission’s Website EUROPA^{^[1]} in English. This updated Edition 2.1 is intended to be a living document, edited and updated with new guidance once approved by the Machinery Working Group. It will be made available in other EU languages, but only the English version will be checked by the Commission. Therefore, in case of doubt, the English version should be taken as the reference.

The Guide can be downloaded and is presented in a printable format. The text of the Directive is presented in boxed red italic type - the comments follow in black type.

The Guide has been prepared with the help of an Editorial Group^{^[2]} and this Update of the 2^nd Edition has been carried out by an external consultant^{^[3]} and the Commission, assisted by some of the members of the Editorial Group. The Commission^{^[4]} wishes to warmly thank the members of the Editorial Group both for the huge amount of work they have carried out as well as for the efficient, constructive and cooperative spirit in which the drafts have been prepared. In parallel to the work of the Editorial Group, a Machinery Core Group established by Orgalime, including representatives of the main sectors of machinery manufacturing, has provided invaluable input from the industry. The drafts prepared by the Editorial Group have been submitted to the Member States and stakeholders for comments. The Commission would also like to thank all those who have made comments. We have tried to take them into account as far as possible.

Of course, the Commission takes full responsibility for the content of the Guide. Readers are invited to communicate any corrections or comments^{^[5]} so that they can be taken into account in preparing future updates or a revised 3^rd Edition.

Brussels, July 2017

The Citations

	§1	The citations
	§2	The legal basis of the Machinery Directive The Recitals
	§3	The recitals
Recital 1	§4	The History of the Machinery Directive
Recital 2	§5	The economic and social importance of the Machinery Directive
Recital 3	§6	Health and safety
Recital 4	§7	Definitions
Recital 5	§8	Inclusion of construction site hoists
Recital 6	§9	Inclusion of portable cartridge-operated fixing and other impact machinery
Recital 7	*§10*	Equipment intended for lifting persons with machinery designed for lifting goods
Recital 8	*§11*	Agricultural and forestry tractors
Recitals 9 & 10	*§12*	Market surveillance
Recital 11	*§13*	Formal objection to standards and the safeguard clause
Recital 12	*§14*	Regulations on use of machinery
Recital 13	*§15*	Measures to deal with groups of hazardous machinery presenting the same risks
Recital 14	*§16*	The state of the art
Recital 15	*§17*	Machinery for consumer use
Recital 16	*§18*	Partly completed machinery
Recital 17	*§19*	Trade fairs and exhibitions
Recital 18	*§20*	The New Approach and the New Legislative Framework
Recital 19	*§21*	Conformity assessment
Recital 20	*§22*	Annex IV machinery
Recitals 21 & 22	*§23*	The CE-marking
Recital 23	*§24*	Risk assessment
Recital 24	*§25*	The technical construction file
Recital 25	*§26*	Legal remedies
Recital 26	*§27*	Enforcement
Recital 27	*§28*	Amendment of the Lifts Directive
Recital 28	*§29*	Subsidiarity and proportionality
Recital 29	*§30*	National correlation tables
Recital 30	*§31*	The Machinery Committee The Articles
Article 1 (1)	*§32*	The products covered by the Machinery Directive
Article 2	*§33*	The use of the term 'machinery' in the broad sense
Article 1 (a)	*§34*	Machinery in the strict sense
Articles 1 (a) & 2 (a) 1^st indent	*§35*	The basic definition
2^nd indent	*§36*	Machinery supplied without connection components
3^rd indent	*§37*	Machinery to be installed on a specific support
4^th indent	*§38*	Assemblies of machinery
	*§39*	Assemblies comprising new and existing machinery
5^th indent	*§40*	Manually powered machinery for lifting loads
Articles 1 (b) & 2 (b)	*§41*	Interchangeable equipment
Articles 1 (c) & 2 (c)	*§42*	Safety components

Articles 1 (d) & 2 (d)	*§43*	Lifting accessories
Articles 1 (e) & 2 (e)	*§44*	Chains, ropes and webbing
Articles 1 (f) & 2 (f)	*§45*	Removable mechanical transmission devices
Articles 1 (g) & 2 (g)	*§46*	Partly completed machinery
Article 1 (2)	*§47*	Products excluded from the scope of the Machinery Directive
Article 1 (2) (a)	*§48*	Safety components intended to be used as spare parts to replace identical components and supplied by the manufacturer of the original machinery
Article 1 (2) (b)	*§49*	Equipment for use in fairgrounds and/or amusement parks
Article 1 (2) (c)	*§50*	Machinery for nuclear purposes
Article 1 (2) (d)	*§51*	Weapons, including firearms
Article 1 (2) (e)	*§52*	Means of transport
1^st indent	*§53*	Agricultural and forestry tractors
2^nd indent	*§54*	Four-or-more-wheeled road vehicles and their trailers
3^rd indent	*§55*	Two- and three-wheeled road vehicles
4^th indent	*§56*	Motor vehicles intended for competition
5^th indent	*§57*	Means of transport by air, on water and on rail networks
Article 1 (2) (f)	*§58*	Seagoing vessels and mobile offshore units and machinery installed on board such vessels and/or units
Article 1 (2) (g)	*§59*	Machinery for military or police purposes
Article 1 (2) (h)	*§60*	Machinery for research purposes
Article 1 (2) (i)	*§61*	Mine winding gear
Article 1 (2) (j)	*§62*	Machinery intended to move performers during artistic performances
Article 1 (2) (k)	*§63*	Machinery covered by the Low Voltage Directive
1^st indent	*§64*	Household appliances intended for domestic use
2^nd indent	*§65*	Audio and video equipment
3^rd indent	*§66*	Information technology equipment
4^th indent	*§67*	Ordinary office machinery
5^th indent	*§68*	Low-voltage switchgear and control gear
6^th indent	*§69*	Electric motors
Article 1 (2) (l)	*§70*	High-voltage electrical equipment
Article 2 (h)	*§71*	The definition of ‘placing on the market’
	*§72*	New and used machinery
	*§73*	The stage at which the Machinery Directive applies
	*§74*	The legal and contractual forms of placing on the market
	*§75*	Auctions
	*§76*	Placing on the market of assemblies of machinery
	*§77*	Placing on the market of partly completed machinery
Article 2 (i)	*§78*	The definition of ‘manufacturer’
	*§79*	Who is the manufacturer?
	*§80*	A person manufacturing machinery for his own use
	*§81*	Other persons who may be considered as manufacturers
	*§82*	Machinery modified before it is first put into service
	*§83*	Distributors
Article 2 (j)	*§84*	The possibility to appoint an authorised representative
	*§85*	The tasks of an authorised representative
Article 2 (k)	*§86*	The definition of ‘putting into service’
Article 2 (l)	*§87*	The definition of ‘harmonised standard’
	*§88*	Essential health and safety requirements
Article 3	*§89*	The Machinery Directive and other internal market legislation
	*§90*	Specific EU legislation that apply instead of the Machinery Directive to machinery that is in their scope
	*§91*	Specific EU legislation that may apply to machinery instead of the Machinery Directive for specific hazards
	*§92*	EU legislation that may apply to machinery, in addition to the

Machinery Directive, for hazards they cover more specifically than the Machinery Directive

Article 4 (1)	*§93*	Market surveillance
	*§94*	Market surveillance of machinery
Article 4 (2)	*§95*	Market surveillance of partly completed machinery
Article 4 (3) & (4)	*§96*	Market surveillance authorities
	*§97*	The market surveillance system
	*§98*	The tools for market surveillance
	*§99*	Documents relating to Annex IV machinery
	*§100*	Action to deal with non-compliant machinery
	*§101*	Unsafe consumer products
	*§102*	Controls at the external borders of the EU
Article 5 (1)	*§103*	The obligations of machinery manufacturers
Article 5 (2)	*§104*	The obligations of manufacturers of partly completed machinery
Article 5 (3)	*§105*	Means of ensuring the conformity of machinery
Article 5 (4)	*§106*	CE marking according to other EU Legislation
Article 6 (1) & (2)	*§107*	Free movement of machinery and partly completed machinery
Article 6 (3)	*§108*	Trade fairs, exhibitions and demonstrations
Article 7 (1)	*§109*	Presumption of conformity conferred by the CE marking and the EC Declaration of Conformity
Article 7 (2)	*§110*	The presumption of conformity conferred by the application of harmonised standards
	*§111*	The classification of machinery standards
	*§112*	The development of harmonised standards for machinery
	*§113*	The identification of harmonised standards
Article 7 (3)	*§114*	Publication of the references of harmonised standards in the OJEU
Article 7 (4)	*§115*	Participation of the social partners in standardisation
Article 8 (1)	*§116*	Measures subject to the Regulatory Committee Procedure
Article 8 (2)	*§117*	Measures subject to the Advisory Committee procedure
Article 9	*§118*	Measures to deal with unsafe machinery presenting similar risks
Article 10	*§119*	Formal objections to harmonised standards
	*§120*	The procedure for formal objections
	*§121*	The outcome of a formal objection
Article 11 (1)	*§122*	The safeguard clause
Article 11 (2) & (3)	*§123*	The safeguard procedure
Article 11 (4)	*§124*	Shortcomings in harmonised standards
Article 11 (5)	*§125*	Action against the person who has affixed the CE marking
Article 11 (6)	*§126*	Information on the safeguard procedure
Article 12 (1)	*§127*	Conformity assessment of machinery
Article 12 (2)	*§128*	Categories of machinery not listed in Annex IV
Article 12 (3)	*§129*	Annex IV machinery designed to harmonised standards that cover all the applicable essential health and safety requirements
Article 12 (4)	*§130*	Other Annex IV machinery
Article 13	*§131*	Procedure for partly completed machinery
	*§132*	Diagram of the procedures for the placing on the market of machinery and partly completed machinery
Article 14 (1) to (5)	*§133*	Notified Bodies
	*§134*	Assessment and monitoring of Notified Bodies
Article 14 (6)	*§135*	Withdrawal of certificates or decisions issued by Notified Bodies
Article 14 (7)	*§136*	Exchange of experience between the notifying authorities
	*§137*	The coordination of Notified Bodies
Article 14 (8)	*§138*	Withdrawal of notification
Article 15	*§139*	National regulations on the installation and use of machinery
	*§140*	National regulations on the health and safety of workers
Article 16	*§141*	The CE marking
Article 17	*§142*	Non conformity of marking
Article 18	*§143*	Confidentiality and transparency
Article 19	*§144*	Machinery AdCo Group
Article 20	*§145*	Reasons for decisions and appeals
Article 21	*§146*	Information sources
Article 22	*§147*	The Machinery Committee
	*§148*	The Machinery Working Group
	*§149*	Diagram of institutions dealing with the Machinery Directive
Article 23	*§150*	Penalties for infringements against the provisions of the Directive
Article 24	*§151*	The borderline between the Machinery Directive and the Lifts Directive
Article 25	*§152*	Repeal of Directive 98/37/EC
Article 26	*§153*	Transposition and application of the provisions of the Directive
Article 27	*§154*	Transition period for portable cartridge operated fixing and other impact machinery
Article 28	*§155*	Date of entry into force of the Directive
Article 29	*§156*	Addressees and signatories of the Directive

Annex I

Essential health and safety requirements relating to the design and construction of machinery

General Principles	*§157*	The General Principles
General Principle 1	*§158*	Risk assessment
	*§159*	Risk assessment and harmonised standards
General Principle 2	*§160*	The applicability of the essential health and safety requirements
General Principle 3	*§161*	The state of the art
	*§162*	Harmonised standards and the state of the art
General Principle 4 1.1.1 Definitions	*§163*	The structure of Annex I
1.1.1 (a)	*§164*	Hazard
1.1.1 (b)	*§165*	Danger zone
1.1.1 (c)	*§166*	Exposed person
1.1.1 (d)	*§167*	Operator
1.1.1 (e)	*§168*	Risk
1.1.1 (f)	*§169*	Guard
1.1.1 (g)	*§170*	Protective devices
1.1.1 (h)	*§171*	Intended use
1.1.1 (i)	*§172*	Reasonably foreseeable misuse

1.1.2 Principles of safety integration

1.1.2 (a) §173 Principles of safety integration

1.1.2 (b) §174 The 3-step method

1.1.2 (c) §175 Preventing abnormal use

1.1.2 (d) §176 Constraints due to the use of PPE

1.1.2 (e) §177 Special equipment and accessories

1.1.3 §178 Materials and products used

1.1.4 §179 Integral lighting

1.1.5 §180 Handling of machinery and parts of machinery

1.1.6 §181 Ergonomic principles

1.1.7 §182 Operating positions in hazardous environments

1.1.8 §183 Seating and the provision of seats

1.2 Control systems

1.2.1 §184 Safety and reliability of control systems

1.2.2 §185 Control devices

1.2.2 – 1^st indent §186 Identification of control devices

1.2.2 – 2^nd indent §187 Positioning of control devices

1.2.2 – 3^rd indent §188 Movement of control devices

1.2.2 – 4^th & 5^th indents §189 Location and positioning of control devices

1.2.2 – 6^th indent §190 Preventing inadvertent operation of control devices

1.2.2 – 7^th indent §191 Strength of control devices

1.2.2 – 2^nd para. §192 Control devices to perform different actions

1.2.2 – 3^rd para. §193 Control devices and ergonomic principles

1.2.2 – 4^th para. §194 Indicators and displays

1.2.2 – 5^th & 6^th paras. §195 Visibility of danger zones during starting

1.2.2 – 7^th para. §196 Location of control positions

1.2.2 – 8^th para. §197 Multiple control positions

1.2.2 - last para. §198 Multiple operating positions

1.2.3 §199 Control of starting

1.2.4.1 §200 Normal stop control devices

1.2.4.2 §201 Operational stop

1.2.4.3 §202 Emergency stop devices

1.2.4.4 §203 Stop controls for assemblies of machinery

1.2.5 §204 Mode selection

1.2.6 §205 Failure of the power supply

1.3 Protection against mechanical hazards

1.3.1 §206 Stability

1.3.2 §207 Break-up during operation

1.3.3 §208 Falling or ejected objects

1.3.4 §209 Sharp edges and angles and rough surfaces

1.3.5 §210 Combined machinery

1.3.6 §211 Variations in operating conditions

1.3.7 §212 Moving parts

1.3.8.1 §213 Moving transmission parts

1.3.8.2 §214 Moving parts involved in the process

1.3.9 §215 Uncontrolled movements

1.4 Required characteristics of guards and protective devices

1.4.1 §216 General requirements for guards and protective devices

1.4.2 §217 Special requirements for guards

1.4.2.1 §218 Fixed guards

1.4.2.2 §219 Interlocking movable guards

1.4.2.3 §220 Adjustable guards restricting access

1.4.3 §221 Protective devices

1.5 Risks due to other hazards

1.5.1 §222 Electricity

1.5.2	*§223*	Unwanted static electricity
1.5.3	*§224*	Energy supply other than electricity
1.5.4	*§225*	Errors of fitting
1.5.5	*§226*	Extreme temperatures
1.5.6	*§227*	Fire
1.5.7	*§228*	Explosion
1.5.8	*§229*	Reduction of noise emission
1.5.8 – 2^nd para.	*§230*	Comparative emission data
1.5.9	*§231*	Vibrations
1.5.10	*§232*	Ionising and non-ionising radiation
1.5.11	*§233*	External radiation
1.5.12	*§234*	Laser radiation
1.5.13	*§235*	Emissions of hazardous materials and substances
1.5.14	*§236*	Risk of being trapped
1.5.15	*§237*	Slips, trips and falls
1.5.16 1.6 Maintenance	*§238*	Lightning
1.6.1	*§239*	Maintenance
1.6.2	*§240*	Access to operating positions and servicing points
1.6.3	*§241*	Isolation of energy sources
1.6.4	*§242*	Operator intervention
1.6.5	*§243*	Cleaning of internal parts
1.7 Information	*§244*	Information for users
1.7.1	*§245*	Information and warnings on the machinery
	*§246*	The official languages of the EU
1.7.1.1	*§247*	Information and information devices
1.7.1.2	*§248*	Warning devices
1.7.2	*§249*	Warning of residual risks
1.7.3 – 1^st & 2^nd paras.	*§250*	Marking of machinery
1.7.3 – 3^rd para.	*§251*	Conformity marking for ATEX machinery
1.7.3 – 4^th para.	*§252*	Information essential for safe use
1.7.3 - last para.	*§253*	Marking parts of the machinery to be handled with lifting equipment
1.7.4	*§254*	Instructions
	*§255*	The form of the instructions
	*§256*	The language of the instructions
1.7.4.1 (a) & (b)	*§257*	The drafting and translation of instructions
1.7.4.1 (c)	*§258*	Preventing foreseeable misuse
1.7.4.1 (d)	*§259*	Instructions for non-professional users
1.7.4.2 (a) & (b)	*§260*	Contents of the instructions – particulars of the machinery and the manufacturer
1.7.4.2 (c)	*§261*	Inclusion of the EC Declaration of Conformity in the instructions
1.7.4.2 (d) (e) & (f)	*§262*	Descriptions, drawings, diagrams and explanations
1.7.4.2 (g) & (h)	*§263*	Intended use and foreseeable misuse
1.7.4.2 (i) & (j)	*§264*	Assembly, installation and connection
1.7.4.2 (k)	*§265*	Putting into service and use
	*§266*	Operator training
1.7.4.2 (l) & (m)	*§267*	Information about residual risks
1.7.4.2 (n)	*§268*	The essential characteristics of tools
1.7.4.2 (o)	*§269*	Stability conditions
1.7.4.2 (p)	*§270*	Transport, handling and storage
1.7.4.2 (q)	*§271*	Emergency procedures and methods for unblocking
1.7.4.2 (r) (s) & (t)	*§272*	Adjustment, maintenance and spare parts
1.7.4.2 (u)	*§273*	The noise emission declaration
1.7.4.2 (v)	*§274*	Implantable medical devices

1.7.4.3 §275 Sales literature

Supplementary essential health and safety requirements for certain categories of machinery

§276 Supplementary requirements for certain categories of machinery 2.1.1 §277 Hygiene requirements for machinery intended for use with

foodstuffs or with cosmetics or pharmaceutical products

2.2.1 §278 Supplementary requirements for portable hand-held and hand-guided machinery

2.2.1.1 §279 Declaration of vibrations transmitted by portable hand-held and hand-guided machinery

2.2.2 §280 Portable fixing and other impact machinery

§281 Machinery for working wood and material with similar characteristics
1. §282 Machinery for pesticide application
2. §283 Preventing unintended exposure of the environment
3. §284 Controls and monitoring by the operator
4. §285 Design to facilitate correct filling and emptying and avoid contamination
5. §286 Application of pesticides, to ensure its correct rate, avoid drift and test to be performed by manufacturer

2.4.5.4 §287 Prevention of losses when machine is stopped

2.4.6 & 2.4.7 §288 Design to ensure easy and thorough cleaning, servicing and checking 2.4.8 & 2.4.9 §289 Marking of nozzles, strainers and filters and the provision of means to affix the name of the pesticide in use

2.4.10 §290 Instructions on precautions, use, inspections, calibration, maintenance etc.

Supplementary essential health and safety requirements to offset hazards due to the mobility of machinery

	*§291*	Supplementary requirements for hazards due to mobility of machinery
3.1.1 (a)	*§292*	Definition of 'hazards due to mobility'
3.1.1 (b)	*§293*	Definition of 'driver'
3.2.1	*§294*	Driving position
3.2.2	*§295*	Seating
3.2.3	*§296*	Positions for persons other than the driver
3.3 - 1^st paragraph	*§297*	Unauthorised use of controls
3.3 - 2^nd, 3^rd & 4^th paras.	*§298*	Remote controls
3.3.1 – 1^st para.	*§299*	Location and positioning of the control devices
3.3.1 – 2^nd para.	*§300*	Pedals
3.3.1 – 3^rd para.	*§301*	Return to neutral
3.3.1 – 4^th & 5^th para.	*§302*	Steering
3.3.1 - last para.	*§303*	Reverse warning signals
3.3.2 – 1^st para.	*§304*	Control of travel movements by a ride-on driver
3.3.2 – 2^nd, 3^rd & 4^th para.	*§305*	Devices exceeding the normal clearance zone
3.3.2 - last para.	*§306*	Unintended travel movement
3.3.3 – 1^st, 2^nd & 3^rd para.	*§307*	Slowing down, stopping and immobilisation
	*§308*	Regulations for road circulation
3.3.3 – 4^th para.	*§309*	Stopping and controlling potentially dangerous operation by remote control
3.3.3 - last para.	*§310*	Stopping of the travelling function
3.3.4	*§311*	Movement of pedestrian-controlled machinery
3.3.5	*§312*	Failure in the power supply to steering
3.4.1	*§313*	Uncontrolled movements
3.4.2	*§314*	Access to the engine compartment
3.4.3	*§315*	Roll-over and tip-over
3.4.4	*§316*	Falling objects

§317 Steps and handholds for access
§318 Towing devices
§319 Removable mechanical transmission devices
§320 Batteries
§321 Fire extinguishers and extinguisher systems
§322 Protection of sprayer operators against risks due to exposure to hazardous substances
§323 Signs, signals and warnings
§324 Marking of mobile machinery
1. §325 Declaration of vibrations transmitted by mobile machinery
2. §326 Instructions on multiple uses

Supplementary essential health and safety requirements to offset hazards due to lifting operations

§327 The scope of application of Part 4

4.1.1 (a) §328 Lifting operation

4.1.1 (b) §329 Guided load

4.1.1 (c) §330 Working coefficient

4.1.1 (d) §331 Test coefficient

4.1.1 (e) §332 Static test

4.1.1 (f) §333 Dynamic test

4.1.1 (g) §334 Carrier

§335 Risks due to lack of stability
§336 Rail tracks and guide rails
_– 1^st, 2^nd & 3^rd para. §337 Mechanical strength

4.1.2.3 _– 4^th para. §338 Mechanical strength – static test coefficients

- last para. §339 Mechanical strength – dynamic test coefficients
§340 Pulleys, drums, wheels, ropes and chains
§341 Lifting accessories and their components
§342 Control of movements
§343 Prevention of risks of collisions
§344 Machinery serving fixed landings
1. §345 Movements of the carrier
2. §346 Access to the carrier
3. §347 Contact with the moving carrier
4. §348 Loads falling off the carrier
5. §349 Safety at landings

4.1.3 §350 Checking fitness for purpose

§351 Static and dynamic tests

§352 Checking fitness for purpose at the place of use

§353 Control of movements of the machinery and the load
§354 Preventing overloading and overturning

§355 Loading control on industrial lift trucks

§356 Guide ropes
§357 Information and markings for chains, ropes and webbing
§358 Marking of lifting accessories
§359 Marking of lifting machinery
§360 Instructions for lifting accessories
§361 Instructions for lifting machinery

Supplementary essential health and safety requirements for machinery intended for underground work

§362 Supplementary requirements for machinery intended for underground

work

5.1 & 5.2 §363 Powered roof supports

§364 Control devices
§365 Control of travel movements
§366 The risk of fire on machinery for underground work
§367 Exhaust emissions

Supplementary essential health and safety requirements for machinery presenting particular hazards due to the lifting of persons

	*§368*	Scope of Part 6
6.1.1	*§369*	Mechanical strength
6.1.2	*§370*	Loading control
6.2	*§371*	Control devices
6.3.1	*§372*	Movement of the carrier
6.3.2 – 1^st para.	*§373*	Tilt of the carrier
6.3.2 – 2^nd & 3^rd para.	*§374*	Use of the carrier as a workstation
6.3.2 - last para.	*§375*	Doors on the carrier
6.3.3	*§376*	Protective roof
6.4	*§377*	Machinery for lifting persons serving fixed landings
6.4.1	*§378*	Risks to persons in or on the carrier
6.4.2	*§379*	Controls at landings
6.4.3	*§380*	Access to the carrier
6.5	*§381*	Markings in the carrier ANNEX II Declarations
Annex II 1 A	*§382*	The EC Declaration of Conformity of machinery
Annex II 1 A (1) to (10)	*§383*	The content of the EC Declaration of Conformity
Annex II 1 B	*§384*	The Declaration of Incorporation of partly completed machinery
Annex II 1 B (1) to (8)	*§385*	The content of the Declaration of Incorporation
Annex II 2	*§386*	Custody of the EC Declaration of Conformity and the Declaration of Incorporation ANNEX III CE marking
Annex III	*§387*	The form of the CE marking

ANNEX IV

Categories of machinery

to which one of the procedures referred to in Article 12 (3) and (4) must be applied

Annex IV

§388 Categories of machinery that may be subject to one of the conformity assessment procedures involving a Notified Body

ANNEX V

Indicative list of safety components referred to in Article 2 (c)

Annex V

§389 Indicative list of safety components

ANNEX VI

Assembly instructions for partly completed machinery

Annex VI

§390 Assembly instructions for partly completed machinery

ANNEX VII

Technical file for machinery - Relevant technical documentation for partly completed machinery

Annex VII A §391 Technical file for machinery

Annex VII A 1 (a) & (b) §392 The content of the technical file

Annex VII A 2 & 3 §393 Communication of the technical file

Annex VII B §394 Relevant technical documentation for partly completed machinery

ANNEX VIII

Assessment of conformity with internal checks on the manufacture of machinery

Annex VIII	*§395*	Assessment of conformity with internal checks on the manufacture of the machinery ANNEX IX EC type-examination
Annex IX 1	*§396*	EC type-examination
Annex IX 2	*§397*	The application for an EC type-examination
Annex IX 3	*§398*	The content of the EC type-examination
Annex IX 4 to 8	*§399*	The EC type-examination certificate
Annex IX 9	*§400*	Validity and review of the EC type-examination certificate ANNEX X Full quality assurance
Annex X 1	*§401*	Full quality assurance
Annex X 2.1	*§402*	The application for assessment of a full quality assurance system
Annex X 2.2	*§403*	The objectives and content of the full quality assurance system
Annex X 2.3	*§404*	Assessment of the full quality assurance system
Annex X 2.4	*§405*	Implementation and modification of the full quality assurance system
Annex X 3	*§406*	Surveillance of the full quality assurance system
Annex X 4	*§407*	Custody of the documentation, decisions and reports relating to the full quality assurance system

ANNEX XI

Minimum criteria to be taken into account by Member States for the notification of bodies

Annex XI *§408* Specific guidance documents	Assessment of Notified Bodies
*§411*	Safety fences as safety components under the Machinery Directive 2006/42/EC
*§412*	Classification of equipment used for lifting loads with lifting machinery
*§413*	Emergency stop devices
*§414*	Guards for drilling machines
*§415*	Manually loaded trucks for the collection of household refuse incorporating a compression mechanism
*§416*	Interchangeable equipment for lifting persons and equipment used with machinery designed for lifting goods for the purpose of lifting persons

[1] http://ec.europa.eu/growth/sectors/mechanical -engineering/machinery/.

[2] The following people have taken part in the work of the Editorial Group: Lennart Ahnström, Emilio

Borzelli, Robert Chudzik, Roberto Cianotti, John Colreavy, Mike Dodds, Cosette Dussaugey, Marcel

Dutrieux, Pascal Etienne, Ludwig Finkeldei, Gun Fridfelt, Mikael Holst, Tuiri Kerttula, Andreas Kühn, Thomas Kraus, Patrick Kurtz, Kevin Lane, Leila Martin, Wolfgang Lentsch, Göran Lundmark, Thomas Moessner, Anders Mortensen, Phil Papard, Boguslaw Piasecki, Marc Schulze, Katri Tytykoski, Roger Upfold, Wendy Van Aerschot, Gustaaf Vandegaer, Henk van Eeden, Richard Wilson, Jürg Zwicky.

[3] Phil Papard Consulting.

[4] The Commission representatives: Ian Fraser (until 2013), Felicia Stoica, Mario Gabrielli Cossellu.

[5] Corrections, comments and suggestions for improvement should be addressed to the functional e-mail box: GROW-MACHINERY@ec.europa.eu.

Language English

Guide to application of the Machinery Directive 2006/42/EC

Read more about Guide to application of the machinery directive 2006/42/CE - July 2017

Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018

Submitted by root on Tue, 06/05/2018 - 22:49

9.3.2018

Official Journal of the European Union

C 92/1

Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2018/C 092/01)

ESO	Reference and title of the standard (and reference document)	First publication OJ	Reference of superseded standard	Date of cessation of presumption of conformity of superseded standard
A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity.
CEN	EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010)	8.4.2011	EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1	30.11.2013
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.
CEN	EN 349:1993+A1:2008 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body	8.9.2009
CEN	EN 547-1:1996+A1:2008 Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery	8.9.2009
CEN	EN 547-2:1996+A1:2008 Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings	8.9.2009
CEN	EN 547-3:1996+A1:2008 Safety of machinery — Human body measurements — Part 3: Anthropometric data	8.9.2009
CEN	EN 574:1996+A1:2008 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design	8.9.2009
CEN	EN 614-1:2006+A1:2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles	8.9.2009
CEN	EN 614-2:2000+A1:2008 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks	8.9.2009
CEN	EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing	8.9.2009
CEN	EN 894-1:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators	8.9.2009
CEN	EN 894-2:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays	8.9.2009
CEN	EN 894-3:2000+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators	8.9.2009
CEN	EN 894-4:2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators	20.10.2010
CEN	EN 981:1996+A1:2008 Safety of machinery — System of auditory and visual danger and information signals	8.9.2009
CEN	EN 1005-1:2001+A1:2008 Safety of machinery — Human physical performance — Part 1: Terms and definitions	8.9.2009
CEN	EN 1005-2:2003+A1:2008 Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery	8.9.2009
CEN	EN 1005-3:2002+A1:2008 Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation	8.9.2009
CEN	EN 1005-4:2005+A1:2008 Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery	8.9.2009
CEN	EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value	8.9.2009
CEN	EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up	8.9.2009
CEN	EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods	8.9.2009
CEN	EN 1093-2:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant	8.9.2009
CEN	EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant	8.9.2009
CEN	EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method	8.9.2009
CEN	EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet	8.9.2009
CEN	EN 1093-7:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet	8.9.2009
CEN	EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method	8.9.2009
CEN	EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method	8.9.2009
CEN	EN 1093-11:2001+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index	8.9.2009
CEN	EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology	18.11.2011	EN 1127-1:2007 Note 2.1	31.7.2014
CEN	EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining	13.2.2015	EN 1127-2:2002+A1:2008 Note 2.1	13.2.2015
CEN	EN 1299:1997+A1:2008 Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation	8.9.2009
CEN	EN 1837:1999+A1:2009 Safety of machinery — Integral lighting of machines	18.12.2009
CEN	EN ISO 3741:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010)	8.4.2011	EN ISO 3741:2009 Note 2.1	30.4.2011
CEN	EN ISO 3743-1:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)	8.4.2011	EN ISO 3743-1:2009 Note 2.1	30.4.2011
CEN	EN ISO 3743-2:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)	18.12.2009
CEN	EN ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)	8.4.2011	EN ISO 3744:2009 Note 2.1	30.4.2011
CEN	EN ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)	5.6.2012	EN ISO 3745:2009 Note 2.1	30.9.2012
	EN ISO 3745:2012/A1:2017	This is the first publication	Note 3	30.6.2018
CEN	EN ISO 3746:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)	8.4.2011	EN ISO 3746:2009 Note 2.1	30.6.2011
CEN	EN ISO 3747:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)	8.4.2011	EN ISO 3747:2009 Note 2.1	30.6.2011
CEN	EN ISO 4413:2010 Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010)	8.4.2011	EN 982:1996+A1:2008 Note 2.1	30.11.2011
CEN	EN ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010)	8.4.2011	EN 983:1996+A1:2008 Note 2.1	30.11.2011
CEN	EN ISO 4871:2009 Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)	18.12.2009
CEN	EN ISO 5136:2009 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003)	18.12.2009
CEN	EN ISO 7235:2009 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003)	18.12.2009
CEN	EN ISO 7731:2008 Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003)	8.9.2009
CEN	EN ISO 9614-1:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993)	18.12.2009
CEN	EN ISO 9614-3:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)	18.12.2009
CEN	EN ISO 10326-1:2016 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)	9.6.2017	EN 30326-1:1994 Note 2.1	30.11.2017
CEN	EN ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007)	26.5.2010
	EN ISO 11161:2007/A1:2010	26.5.2010	Note 3	30.9.2010
CEN	EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)	13.2.2015	EN ISO 11200:2009 Note 2.1	13.2.2015
CEN	EN ISO 11201:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)	20.10.2010	EN ISO 11201:2009 Note 2.1	30.11.2010
CEN	EN ISO 11202:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)	20.10.2010	EN ISO 11202:2009 Note 2.1	30.11.2010
CEN	EN ISO 11203:2009 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)	18.12.2009
CEN	EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)	20.10.2010	EN ISO 11204:2009 Note 2.1	30.11.2010
CEN	EN ISO 11205:2009 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)	18.12.2009
CEN	EN ISO 11546-1:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)	18.12.2009
CEN	EN ISO 11546-2:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)	18.12.2009
CEN	EN ISO 11688-1:2009 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995)	18.12.2009
CEN	EN ISO 11691:2009 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995)	18.12.2009
CEN	EN ISO 11957:2009 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996)	18.12.2009
CEN	EN 12198-1:2000+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles	8.9.2009
CEN	EN 12198-2:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure	8.9.2009
CEN	EN 12198-3:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening	8.9.2009
CEN	EN 12254:2010 Screens for laser working places — Safety requirements and testing	26.5.2010	EN 12254:1998+A2:2008 Note 2.1	30.9.2010
	EN 12254:2010/AC:2011
CEN	EN 12786:2013 Safety of machinery — Requirements for the drafting of the vibration clauses of safety standards	28.11.2013
CEN	EN 13490:2001+A1:2008 Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration	8.9.2009
CEN	EN ISO 13732-1:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)	8.9.2009
CEN	EN ISO 13732-3:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005)	8.9.2009
CEN	EN ISO 13753:2008 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)	8.9.2009
CEN	EN ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2015)	13.5.2016	EN ISO 13849-1:2008 Note 2.1	30.6.2016
CEN	EN ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2012)	5.4.2013	EN ISO 13849-2:2008 Note 2.1	30.4.2013
CEN	EN ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design (ISO 13850:2015)	13.5.2016	EN ISO 13850:2008 Note 2.1	31.5.2016
CEN	EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)	20.10.2010	EN 999:1998+A1:2008 Note 2.1	30.11.2010
CEN	EN ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)	28.11.2013	EN 1760-1:1997+A1:2009 Note 2.1	28.11.2013
CEN	EN ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)	28.11.2013	EN 1760-2:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)	28.11.2013	EN 1760-3:2004+A1:2009 Note 2.1	31.1.2014
CEN	EN ISO 13857:2008 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)	8.9.2009
CEN	EN ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection (ISO 14119:2013)	11.4.2014	EN 1088:1995+A2:2008 Note 2.1	30.4.2015
CEN	EN ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)	13.5.2016	EN 953:1997+A1:2009 Note 2.1	31.5.2016
CEN	EN ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)	9.9.2016	EN ISO 14122-1:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2016)	9.9.2016	EN ISO 14122-2:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)	9.9.2016	EN ISO 14122-3:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2016)	9.9.2016	EN ISO 14122-4:2004 Note 2.1	31.12.2016
CEN	EN ISO 14123-1:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)	13.5.2016	EN 626-1:1994+A1:2008 Note 2.1	31.5.2016
CEN	EN ISO 14123-2:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)	13.5.2016	EN 626-2:1996+A1:2008 Note 2.1	30.6.2016
CEN	EN ISO 14159:2008 Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002)	8.9.2009
CEN	EN ISO 14738:2008 Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)	8.9.2009
CEN	EN ISO 15536-1:2008 Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005)	8.9.2009
CEN	EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours	18.11.2011
CEN	EN 16590-1:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development (ISO 25119-1:2010 modified)	13.2.2015
CEN	EN 16590-2:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase (ISO 25119-2:2010 modified)	13.2.2015
CEN	EN ISO 19353:2016 Safety of machinery — Fire prevention and fire protection (ISO 19353:2015)	9.9.2016	EN 13478:2001+A1:2008 Note 2.1	31.7.2016
CEN	EN ISO 20643:2008 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005)	8.9.2009
	EN ISO 20643:2008/A1:2012	15.11.2012	Note 3	31.1.2013
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.
CEN	EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts	8.9.2009
	EN 81-3:2000+A1:2008/AC:2009
CEN	EN 81-31:2010 Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts	20.10.2010
CEN	EN 81-40:2008 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility	8.9.2009
CEN	EN 81-41:2010 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility	8.4.2011
CEN	EN 81-43:2009 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes	8.9.2009
CEN	EN 115-1:2017 Safety of escalators and moving walks — Part 1: Construction and installation	This is the first publication	EN 115-1:2008+A1:2010 Note 2.1	31.1.2019
CEN	EN 201:2009 Plastics and rubber machines — Injection moulding machines — Safety requirements	18.12.2009
CEN	EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels	18.11.2011	EN 267:2009 Note 2.1	29.2.2012
CEN	EN 280:2013+A1:2015 Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests	15.1.2016	EN 280:2013 Note 2.1	28.2.2017
CEN	EN 289:2014 Plastics and rubber machines — Compression moulding machines and transfer moulding machines — Safety requirements	13.2.2015	EN 289:2004+A1:2008 Note 2.1	13.2.2015
CEN	EN 303-5:2012 Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking	24.8.2012
CEN	EN 378-2:2016 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation	9.6.2017	EN 378-2:2008+A2:2012 Note 2.1	30.11.2017
CEN	EN 415-1:2014 Safety of packaging machines — Part 1: Terminology and classification of packaging machines and associated equipment	15.1.2016	EN 415-1:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 415-3:1999+A1:2009 Safety of packaging machines — Part 3: Form, fill and seal machines	18.12.2009
CEN	EN 415-5:2006+A1:2009 Safety of packaging machines — Part 5: Wrapping machines	18.12.2009
CEN	EN 415-6:2013 Safety of packaging machines — Part 6: Pallet wrapping machines	28.11.2013	EN 415-6:2006+A1:2009 Note 2.1	30.11.2013
CEN	EN 415-7:2006+A1:2008 Safety of packaging machines — Part 7: Group and secondary packaging machines	8.9.2009
CEN	EN 415-8:2008 Safety of packaging machines — Part 8: Strapping machines	8.9.2009
CEN	EN 415-9:2009 Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3	18.12.2009
CEN	EN 415-10:2014 Safety of packaging machines — Part 10: General Requirements	11.7.2014
CEN	EN 422:2009 Plastics and rubber machines — Blow moulding machines — Safety requirements	8.9.2009
CEN	EN 453:2014 Food processing machinery — Dough mixers — Safety and hygiene requirements	15.1.2016	EN 453:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 454:2014 Food processing machinery — Planetary mixers — Safety and hygiene requirements	15.1.2016	EN 454:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements	28.11.2013	EN 474-1:2006+A3:2013 Note 2.1	28.11.2013
	EN 474-1:2006+A4:2013/AC:2014
Warning: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
CEN	EN 474-2:2006+A1:2008 Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers	8.9.2009
CEN	EN 474-3:2006+A1:2009 Earth-moving machinery — Safety — Part 3: Requirements for loaders	8.9.2009
CEN	EN 474-4:2006+A2:2012 Earth-moving machinery — Safety — Part 4: Requirements for backhoe loaders	23.3.2012
CEN	EN 474-5:2006+A3:2013 Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators	28.11.2013	EN 474-5:2006+A1:2009+A2:2012 Note 2.1	31.1.2014
CEN	EN 474-6:2006+A1:2009 Earth-moving machinery — Safety — Part 6: Requirements for dumpers	8.9.2009
CEN	EN 474-7:2006+A1:2009 Earth-moving machinery — Safety — Part 7: Requirements for scrapers	8.9.2009
CEN	EN 474-8:2006+A1:2009 Earth-moving machinery — Safety — Part 8: Requirements for graders	8.9.2009
CEN	EN 474-9:2006+A1:2009 Earth-moving machinery — Safety — Part 9: Requirements for pipelayers	8.9.2009
CEN	EN 474-10:2006+A1:2009 Earth-moving machinery — Safety — Part 10: Requirements for trenchers	8.9.2009
CEN	EN 474-11:2006+A1:2008 Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors	8.9.2009
CEN	EN 474-12:2006+A1:2008 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators	8.9.2009
CEN	EN 500-1:2006+A1:2009 Mobile road construction machinery — Safety — Part 1: Common requirements	26.5.2010
CEN	EN 500-2:2006+A1:2008 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines	8.9.2009
CEN	EN 500-3:2006+A1:2008 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines	8.9.2009
CEN	EN 500-4:2011 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines	20.7.2011	EN 500-4:2006+A1:2009 Note 2.1	31.8.2011
CEN	EN 500-6:2006+A1:2008 Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers	8.9.2009
CEN	EN 528:2008 Rail dependent storage and retrieval equipment — Safety requirements	8.9.2009
CEN	EN 536:2015 Road construction machines — Mixing plants for road construction materials — Safety requirements	15.1.2016
CEN	EN 609-1:2017 Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters	9.6.2017	EN 609-1:1999+A2:2009 Note 2.1	30.6.2018
CEN	EN 609-2:1999+A1:2009 Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters	18.12.2009
CEN	EN 617:2001+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers	8.4.2011
CEN	EN 618:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors	8.4.2011
CEN	EN 619:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads	8.4.2011
CEN	EN 620:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials	8.4.2011
CEN	EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels	8.9.2009
	EN 676:2003+A2:2008/AC:2008
CEN	EN 690:2013 Agricultural machinery — Manure spreaders — Safety	11.4.2014	EN 690:1994+A1:2009 Note 2.1	30.4.2014
CEN	EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety	8.9.2009
CEN	EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presses	18.11.2011	EN 693:2001+A1:2009 Note 2.1	31.3.2012
CEN	EN 703:2004+A1:2009 Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety	18.12.2009
CEN	EN 706:1996+A1:2009 Agricultural machinery — Vine shoot tipping machines — Safety	18.12.2009
CEN	EN 707:1999+A1:2009 Agricultural machinery — Slurry tankers — Safety	18.12.2009
CEN	EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety	26.5.2010	EN 709:1997+A2:2009 Note 2.1	31.12.2010
	EN 709:1997+A4:2009/AC:2012
CEN	EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment	20.10.2010
	EN 710:1997+A1:2010/AC:2012
CEN	EN 741:2000+A1:2010 Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials	8.4.2011
CEN	EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment	18.12.2009
CEN	EN 746-2:2010 Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems	20.10.2010
CEN	EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases	8.9.2009
CEN	EN 786:1996+A2:2009 Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety	18.12.2009
CEN	EN 792-13:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools	8.9.2009
CEN	EN 809:1998+A1:2009 Pumps and pump units for liquids — Common safety requirements	18.12.2009
	EN 809:1998+A1:2009/AC:2010
CEN	EN 818-1:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance	8.9.2009
CEN	EN 818-2:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8	8.9.2009
CEN	EN 818-3:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4	8.9.2009
CEN	EN 818-4:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8	8.9.2009
CEN	EN 818-5:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4	8.9.2009
CEN	EN 818-6:2000+A1:2008 Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer	8.9.2009
CEN	EN 818-7:2002+A1:2008 Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)	8.9.2009
CEN	EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines	15.11.2012	EN 848-1:2007+A1:2009 Note 2.1	31.3.2013
CEN	EN 848-2:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines	15.11.2012	EN 848-2:2007+A1:2009 Note 2.1	31.3.2013
CEN	EN 848-3:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 3: Numerically controlled (NC) boring and routing machines	5.4.2013	EN 848-3:2007+A2:2009 Note 2.1	30.4.2013
CEN	EN 859:2007+A2:2012 Safety of woodworking machines — Hand fed surface planing machines	24.8.2012	EN 859:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 860:2007+A2:2012 Safety of woodworking machines — One side thickness planing machines	24.8.2012	EN 860:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 861:2007+A2:2012 Safety of woodworking machines — Surface planing and thicknessing machines	24.8.2012	EN 861:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 869:2006+A1:2009 Safety of machinery — Safety requirements for pressure metal diecasting units	8.9.2009
CEN	EN 908:1999+A1:2009 Agricultural and forestry machinery — Reel machines for irrigation — Safety	18.12.2009
CEN	EN 909:1998+A1:2009 Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety	18.12.2009
CEN	EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements	18.12.2009
CEN	EN 931:1997+A2:2009 Footwear manufacturing machines — Lasting machines — Safety requirements	18.12.2009
CEN	EN 940:2009+A1:2012 Safety of woodworking machines — Combined woodworking machines	5.6.2012	EN 940:2009 Note 2.1	31.8.2012
CEN	EN 957-6:2010+A1:2014 Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods	13.2.2015
CEN	EN 972:1998+A1:2010 Tannery machines — Reciprocating roller machines — Safety requirements	8.4.2011
	EN 972:1998+A1:2010/AC:2011
CEN	EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements	8.4.2011
CEN	EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery	8.4.2011
CEN	EN 1010-3:2002+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines	18.12.2009
CEN	EN 1010-4:2004+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines	18.12.2009
CEN	EN 1012-1:2010 Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors	8.4.2011
CEN	EN 1012-2:1996+A1:2009 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps	18.12.2009
CEN	EN 1012-3:2013 Compressors and vacuum pumps — Safety requirements — Part 3: Process compressors	11.4.2014
CEN	EN 1028-1:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements	8.9.2009
CEN	EN 1028-2:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements	8.9.2009
CEN	EN 1034-1:2000+A1:2010 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements	26.5.2010
CEN	EN 1034-2:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums	26.5.2010
CEN	EN 1034-3:2011 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Rereelers and winders	29.2.2012	EN 1034-3:1999+A1:2009 Note 2.1	30.6.2012
CEN	EN 1034-4:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities	26.5.2010
CEN	EN 1034-5:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters	26.5.2010
CEN	EN 1034-6:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender	26.5.2010
CEN	EN 1034-7:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests	26.5.2010
CEN	EN 1034-8:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 8: Refining plants	5.6.2012
CEN	EN 1034-13:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units	26.5.2010
CEN	EN 1034-14:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter	26.5.2010
CEN	EN 1034-16:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 16: Paper and board making machines	5.6.2012
CEN	EN 1034-17:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 17: Tissue making machines	15.11.2012
CEN	EN 1034-21:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 21: Coating machines	15.11.2012
CEN	EN 1034-22:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders	26.5.2010
CEN	EN 1034-26:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 26: Roll packaging machines	24.8.2012
CEN	EN 1034-27:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 27: Roll handling systems	15.11.2012
CEN	EN 1114-1:2011 Plastics and rubber machines — Extruders and extrusion lines — Part 1: Safety requirements for extruders	29.2.2012
CEN	EN 1114-3:2001+A1:2008 Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs	8.9.2009
CEN	EN 1175-1:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks	8.4.2011
CEN	EN 1175-2:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks	8.4.2011
CEN	EN 1175-3:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks	8.4.2011
CEN	EN 1218-1:1999+A1:2009 Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table	18.12.2009
CEN	EN 1218-2:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains	8.9.2009
CEN	EN 1218-3:2001+A1:2009 Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers	8.9.2009
CEN	EN 1218-5:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain	18.12.2009
CEN	EN 1247:2004+A1:2010 Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines	8.4.2011
CEN	EN 1248:2001+A1:2009 Foundry machinery — Safety requirements for abrasive blasting equipment	8.9.2009
CEN	EN 1265:1999+A1:2008 Safety of machinery — Noise test code for foundry machines and equipment	8.9.2009
CEN	EN 1374:2000+A1:2010 Agricultural machinery — Silos stationary unloaders for round silos — Safety	20.10.2010
CEN	EN 1398:2009 Dock levellers — Safety requirements	8.9.2009
CEN	EN 1417:2014 Plastics and rubber machines — Two-roll mills — Safety requirements	15.1.2016	EN 1417:1996+A1:2008 Note 2.1	31.12.2016
CEN	EN 1459-1:2017 Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks	This is the first publication	EN 1459:1998+A3:2012 Note 2.1	30.9.2018
CEN	EN 1459-2:2015 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing variable-reach trucks	15.1.2016
CEN	EN 1492-1:2000+A1:2008 Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use	8.9.2009
CEN	EN 1492-2:2000+A1:2008 Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use	8.9.2009
CEN	EN 1492-4:2004+A1:2008 Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes	8.9.2009
CEN	EN 1493:2010 Vehicle lifts	8.4.2011	EN 1493:1998+A1:2008 Note 2.1	4.8.2011
CEN	EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment	8.9.2009
CEN	EN 1495:1997+A2:2009 Lifting platforms — Mast climbing work platforms	18.12.2009
	EN 1495:1997+A2:2009/AC:2010
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.
CEN	EN 1501-1:2011+A1:2015 Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles	15.1.2016	EN 1501-1:2011 Note 2.1	29.2.2016
CEN	EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles	29.12.2009
CEN	EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles	8.9.2009
CEN	EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles	8.9.2009
CEN	EN 1501-5:2011 Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles	18.11.2011	EN 1501-1:1998+A2:2009 Note 2.1	29.2.2012
CEN	EN 1526:1997+A1:2008 Safety of industrial trucks — Additional requirements for automated functions on trucks	8.9.2009
CEN	EN 1539:2015 Dryers and ovens, in which flammable substances are released — Safety requirements	13.5.2016	EN 1539:2009 Note 2.1	30.4.2016
CEN	EN 1547:2001+A1:2009 Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment	8.9.2009
CEN	EN 1550:1997+A1:2008 Machine-tools safety — Safety requirements for the design and construction of work holding chucks	8.9.2009
CEN	EN 1554:2012 Conveyor belts — Drum friction testing	24.8.2012
CEN	EN 1570-1:2011+A1:2014 Safety requirements for lifting tables — Part 1: Lifting tables serving up to two fixed landings	13.5.2016	EN 1570-1:2011 Note 2.1	The date of this publication
CEN	EN 1570-2:2016 Safety requirements for lifting tables — Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s	9.6.2017
CEN	EN 1612-1:1997+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units	8.9.2009
CEN	EN 1672-2:2005+A1:2009 Food processing machinery — Basic concepts — Part 2: Hygiene requirements	8.9.2009
CEN	EN 1673:2000+A1:2009 Food processing machinery — Rotary rack ovens — Safety and hygiene requirements	26.5.2010
CEN	EN 1674:2015 Food processing machinery — Dough sheeters — Safety and hygiene requirements	15.1.2016	EN 1674:2000+A1:2009 Note 2.1	31.3.2016
CEN	EN 1677-1:2000+A1:2008 Components for slings — Safety — Part 1: Forged steel components, Grade 8	8.9.2009
CEN	EN 1677-2:2000+A1:2008 Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8	8.9.2009
CEN	EN 1677-3:2001+A1:2008 Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8	8.9.2009
CEN	EN 1677-4:2000+A1:2008 Components for slings — Safety — Part 4: Links, Grade 8	8.9.2009
CEN	EN 1677-5:2001+A1:2008 Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4	8.9.2009
CEN	EN 1677-6:2001+A1:2008 Components for slings — Safety — Part 6: Links — Grade 4	8.9.2009
CEN	EN 1678:1998+A1:2010 Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements	20.10.2010
CEN	EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines — Safety — Part 1: Compression ignition engines	20.7.2011
CEN	EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines	8.9.2009
	EN 1710:2005+A1:2008/AC:2010
CEN	EN 1755:2000+A2:2013 Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust	28.11.2013	EN 1755:2000+A1:2009 Note 2.1	28.11.2013
CEN	EN 1756-1:2001+A1:2008 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods	8.9.2009
CEN	EN 1756-2:2004+A1:2009 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers	18.12.2009
CEN	EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing	26.5.2010	EN 1777:2004+A1:2009 Note 2.1	30.9.2010
CEN	EN 1804-1:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements	26.5.2010
CEN	EN 1804-2:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Power set legs and rams	26.5.2010
CEN	EN 1804-3:2006+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems	26.5.2010
CEN	EN 1807-1:2013 Safety of woodworking machines — Band sawing machines — Part 1: Table band saws and band re-saws	28.11.2013	EN 1807:1999+A1:2009 Note 2.1	28.11.2013
CEN	EN 1807-2:2013 Safety of woodworking machines — Band sawing machines — Part 2: Log sawing machines	28.11.2013	EN 1807:1999+A1:2009 Note 2.1	28.11.2013
CEN	EN 1808:2015 Safety requirements for suspended access equipment — Design calculations, stability criteria, construction — Examinations and tests	13.5.2016	EN 1808:1999+A1:2010 Note 2.1	13.5.2016
CEN	EN 1829-1:2010 High pressure water jet machines — Safety requirements — Part 1: Machines	26.5.2010
CEN	EN 1829-2:2008 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors	8.9.2009
	EN 1829-2:2008/AC:2011
CEN	EN 1845:2007 Footwear manufacturing machines — Footwear moulding machines — Safety requirements	8.9.2009
CEN	EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance	28.11.2013	EN 1846-2:2009 Note 2.1	28.11.2013
CEN	EN 1846-3:2013 Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance	28.11.2013	EN 1846-3:2002+A1:2008 Note 2.1	31.1.2014
CEN	EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body — Safety	18.12.2009
CEN	EN 1870-3:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches	8.9.2009
CEN	EN 1870-4:2012 Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading	5.6.2012	EN 1870-4:2001+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-5:2002+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines	15.11.2012	EN 1870-5:2002+A1:2009 Note 2.1	31.3.2013
CEN	EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading	18.12.2009
CEN	EN 1870-7:2012 Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading	5.4.2013	EN 1870-7:2002+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-8:2012 Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading	5.4.2013	EN 1870-8:2001+A1:2009 Note 2.1	31.5.2013
CEN	EN 1870-9:2012 Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading	15.11.2012	EN 1870-9:2000+A1:2009 Note 2.1	31.3.2013
CEN	EN 1870-10:2013 Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines	28.11.2013	EN 1870-10:2003+A1:2009 Note 2.1	30.11.2013
CEN	EN 1870-11:2013 Safety of woodworking machines — Circular sawing machines — Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)	11.4.2014	EN 1870-11:2003+A1:2009 Note 2.1	30.4.2014
CEN	EN 1870-12:2013 Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines	11.4.2014	EN 1870-12:2003+A1:2009 Note 2.1	30.4.2014
CEN	EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines	5.6.2012	EN 1870-13:2007+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines	5.6.2012	EN 1870-14:2007+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-15:2012 Safety of woodworking machines — Circular sawing machines — Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading	5.4.2013	EN 1870-15:2004+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-16:2012 Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V cutting	5.4.2013	EN 1870-16:2005+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-17:2012+A1:2015 Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)	13.5.2016	EN 1870-17:2012 Note 2.1	The date of this publication
CEN	EN 1870-19:2013 Safety of woodworking machines — Circular sawing machines — Part 19: Circular saw benches (with and without sliding table) and building site saws	11.4.2014	EN 1870-1:2007+A1:2009 Note 2.1	31.5.2014
CEN	EN 1889-1:2011 Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles	18.11.2011
CEN	EN 1889-2:2003+A1:2009 Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives	8.9.2009
CEN	EN 1915-1:2013 Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements	28.11.2013	EN 1915-1:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 1915-2:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods	8.9.2009
CEN	EN 1915-3:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction	8.9.2009
CEN	EN 1915-4:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction	8.9.2009
CEN	EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements	28.11.2013	EN 1953:1998+A1:2009 Note 2.1	31.3.2014
CEN	EN 1974:1998+A1:2009 Food processing machinery — Slicing machines — Safety and hygiene requirements	18.12.2009
CEN	EN ISO 2151:2008 Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004)	8.9.2009
CEN	EN ISO 2860:2008 Earth-moving machinery — Minimum access dimensions (ISO 2860:1992)	8.9.2009
CEN	EN ISO 2867:2011 Earth-moving machinery — Access systems (ISO 2867:2011)	18.11.2011	EN ISO 2867:2008 Note 2.1	31.7.2014
CEN	EN ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:2013)	28.11.2013	EN ISO 3164:2008 Note 2.1	30.11.2013
CEN	EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)	20.10.2010
	EN ISO 3266:2010/A1:2015	13.5.2016	Note 3	30.6.2016
CEN	EN ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)	8.9.2009
CEN	EN ISO 3449:2008 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005)	8.9.2009
CEN	EN ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems (ISO 3450:2011)	29.2.2012	EN ISO 3450:2008 Note 2.1	31.5.2012
CEN	EN ISO 3457:2008 Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003)	8.9.2009
CEN	EN ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008)	8.9.2009
CEN	EN ISO 3691-1:2015 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)	15.1.2016	EN ISO 3691-1:2012 Note 2.1	31.1.2016
	EN ISO 3691-1:2015/AC:2016
CEN	EN ISO 3691-5:2014 Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)	11.7.2014	EN ISO 3691-5:2009 Note 2.1	31.8.2014
	EN ISO 3691-5:2014/AC:2014
CEN	EN ISO 3691-6:2015 Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers (ISO 3691-6:2013)	13.5.2016	EN ISO 3691-6:2013 Note 2.1	13.5.2016
	EN ISO 3691-6:2015/AC:2016
CEN	EN ISO 4254-1:2015 Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2013)	13.5.2016	EN ISO 4254-1:2013 Note 2.1	13.5.2016
CEN	EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008)	26.5.2010
	EN ISO 4254-5:2009/AC:2011
CEN	EN ISO 4254-6:2009 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)	26.5.2010
	EN ISO 4254-6:2009/AC:2010
CEN	EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)	26.5.2010
	EN ISO 4254-7:2009/AC:2010
CEN	EN ISO 4254-10:2009 Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009)	26.5.2010
	EN ISO 4254-10:2009/AC:2010
CEN	EN ISO 4254-11:2010 Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010)	8.4.2011	EN 704:1999+A1:2009 Note 2.1	30.6.2011
CEN	EN ISO 4254-12:2012 Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)	24.8.2012	EN 745:1999+A1:2009 Note 2.1	31.12.2012
	EN ISO 4254-12:2012/A1:2017	This is the first publication	Note 3	30.6.2018
CEN	EN ISO 4254-14:2016 Agricultural machinery — Safety — Part 14: Bale wrappers (ISO 4254-14:2016)	9.9.2016
CEN	EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
CEN	EN ISO 5395-2:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
	EN ISO 5395-2:2013/A1:2016	9.6.2017	Note 3	30.6.2017
	EN ISO 5395-2:2013/A2:2017	This is the first publication	Note 3	30.6.2018
CEN	EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
	EN ISO 5395-3:2013/A1:2017	9.6.2017	Note 3	31.8.2017
CEN	EN ISO 5674:2009 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)	8.9.2009
CEN	EN ISO 6682:2008 Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)	8.9.2009
CEN	EN ISO 6683:2008 Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005)	8.9.2009
CEN	EN ISO 7096:2008 Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000)	8.9.2009
	EN ISO 7096:2008/AC:2009
CEN	EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008)	8.9.2009
CEN	EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008)	8.9.2009
CEN	EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008)	8.9.2009
CEN	EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)	9.9.2016	EN 12601:2010 Note 2.1	30.6.2017
CEN	EN ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001)	18.12.2009
	EN ISO 9902-1:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-1:2001/A2:2014	15.1.2016	Note 3	29.2.2016
CEN	EN ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)	18.12.2009
	EN ISO 9902-2:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-2:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001)	18.12.2009
	EN ISO 9902-3:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-3:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)	18.12.2009
	EN ISO 9902-4:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-4:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)	18.12.2009
	EN ISO 9902-5:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-5:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-6:2001 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)	18.12.2009
	EN ISO 9902-6:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-6:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)	18.12.2009
	EN ISO 9902-7:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-7:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 10218-1:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots (ISO 10218-1:2011)	18.11.2011	EN ISO 10218-1:2008 Note 2.1	1.1.2013
CEN	EN ISO 10218-2:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration (ISO 10218-2:2011)	18.11.2011
CEN	EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997)	8.9.2009
CEN	EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)	8.9.2009
CEN	EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)	8.9.2009
CEN	EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997)	8.9.2009
CEN	EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)	8.9.2009
CEN	EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997)	8.9.2009
CEN	EN ISO 10517:2009 Powered hand-held hedge trimmers — Safety (ISO 10517:2009)	18.12.2009
	EN ISO 10517:2009/A1:2013	28.11.2013	Note 3	30.9.2014
CEN	EN ISO 10821:2005 Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005)	18.12.2009
	EN ISO 10821:2005/A1:2009	18.12.2009	Note 3	28.12.2009
CEN	EN ISO 11102-1:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997)	18.12.2009
CEN	EN ISO 11102-2:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)	8.9.2009
CEN	EN ISO 11111-1:2016 Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2016)	9.6.2017		30.11.2017
CEN	EN ISO 11111-2:2005 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)	18.12.2009
	EN ISO 11111-2:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-2:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11111-3:2005 Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005)	18.12.2009
	EN ISO 11111-3:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-3:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11111-4:2005 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)	18.12.2009
	EN ISO 11111-4:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-4:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11111-5:2005 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)	18.12.2009
	EN ISO 11111-5:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-5:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11111-6:2005 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)	18.12.2009
	EN ISO 11111-6:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-6:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11111-7:2005 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)	18.12.2009
	EN ISO 11111-7:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-7:2005/A2:2016	9.6.2017	Note 3	The date of this publication
CEN	EN ISO 11145:2016 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2016)	9.9.2016	EN ISO 11145:2008 Note 2.1	30.9.2016
CEN	EN ISO 11148-1:2011 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)	24.8.2012	EN 792-1:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-2:2011 Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)	29.2.2012	EN 792-2:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2012)	5.4.2013	EN ISO 11148-3:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)	5.4.2013	EN ISO 11148-4:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-5:2011 Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills (ISO 11148-5:2011)	29.2.2012	EN 792-5:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)	5.4.2013	EN ISO 11148-6:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders (ISO 11148-7:2012)	15.11.2012	EN 792-7:2001+A1:2008 Note 2.1	28.2.2013
CEN	EN ISO 11148-8:2011 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers (ISO 11148-8:2011)	29.2.2012	EN 792-8:2001+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-9:2011 Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders (ISO 11148-9:2011)	29.2.2012	EN 792-9:2001+A1:2008 Note 2.1	1.6.2012
CEN	EN ISO 11148-10:2011 Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools (ISO 11148-10:2011)	29.2.2012	EN 792-10:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-11:2011 Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears (ISO 11148-11:2011)	29.2.2012	EN 792-11:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)	5.4.2013	EN 792-12:2000+A1:2008 Note 2.1	30.6.2013
CEN	EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013)	28.11.2013	EN ISO 11252:2008 Note 2.1	28.2.2014
CEN	EN ISO 11553-1:2008 Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005)	8.9.2009
CEN	EN ISO 11553-2:2008 Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)	8.9.2009
CEN	EN ISO 11553-3:2013 Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)	28.11.2013
CEN	EN ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)	This is the first publication	EN ISO 11554:2008 Note 2.1	30.6.2018
CEN	EN ISO 11680-1:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)	29.2.2012	EN ISO 11680-1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11680-2:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)	29.2.2012	EN ISO 11680-2:2008 Note 2.1	30.6.2012
CEN	EN ISO 11681-1:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2011)	29.2.2012	EN ISO 11681-1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11681-2:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2011)	29.2.2012	EN ISO 11681-2:2008 Note 2.1	30.6.2012
	EN ISO 11681-2:2011/A1:2017	This is the first publication	Note 3	30.6.2018
CEN	EN ISO 11806-1:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)	29.2.2012	EN ISO 11806:2008 Note 2.1	30.6.2012
CEN	EN ISO 11806-2:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)	29.2.2012
CEN	EN ISO 11850:2011 Machinery for forestry — General safety requirements (ISO 11850:2011)	29.2.2012	EN 14861:2004+A1:2009 Note 2.1	31.5.2012
	EN ISO 11850:2011/A1:2016	9.9.2016	Note 3	31.8.2016
CEN	EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar — Safety requirements	15.11.2012	EN 12001:2003+A1:2009 Note 2.1	28.2.2013
CEN	EN 12012-1:2007+A1:2008 Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators	8.9.2009
CEN	EN 12012-3:2001+A1:2008 Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders	8.9.2009
CEN	EN 12012-4:2006+A1:2008 Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators	8.9.2009
CEN	EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements	8.9.2009
CEN	EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity	28.11.2013	EN 12016:2004+A1:2008 Note 2.1	28.2.2014
CEN	EN 12041:2014 Food processing machinery — Moulders — Safety and hygiene requirements	15.1.2016	EN 12041:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 12042:2014 Food processing machinery — Automatic dough dividers — Safety and hygiene requirements	13.2.2015	EN 12042:2005+A1:2010 Note 2.1	13.2.2015
CEN	EN 12043:2014 Food processing machinery — Intermediate provers — Safety and hygiene requirements	15.1.2016	EN 12043:2000+A1:2010 Note 2.1	29.2.2016
CEN	EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements	18.12.2009
CEN	EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions	8.9.2009
CEN	EN 12077-2:1998+A1:2008 Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices	8.9.2009
CEN	EN 12110:2014 Tunnelling machines — Air locks — Safety requirements	13.2.2015	EN 12110:2002+A1:2008 Note 2.1	13.2.2015
CEN	EN 12111:2014 Tunnelling machines — Road headers and continuous miners — Safety requirements	13.2.2015	EN 12111:2002+A1:2009 Note 2.1	13.2.2015
CEN	EN 12158-1:2000+A1:2010 Builders' hoists for goods — Part 1: Hoists with accessible platforms	8.4.2011
CEN	EN 12158-2:2000+A1:2010 Builders' hoists for goods — Part 2: Inclined hoists with non-accessible load carrying devices	8.4.2011
CEN	EN 12159:2012 Builders hoists for persons and materials with vertically guided cages	5.4.2013	EN 12159:2000+A1:2009 Note 2.1	31.5.2013
CEN	EN 12162:2001+A1:2009 Liquid pumps — Safety requirements — Procedure for hydrostatic testing	8.9.2009
CEN	EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements	18.12.2009
CEN	EN 12267:2003+A1:2010 Food processing machinery — Circular saw machines — Safety and hygiene requirements	20.10.2010
CEN	EN 12268:2014 Food processing machinery — Band saw machines — Safety and hygiene requirements	15.1.2016	EN 12268:2003+A1:2010 Note 2.1	29.2.2016
CEN	EN 12301:2000+A1:2008 Plastics and rubber machines — Calenders — Safety requirements	8.9.2009
CEN	EN 12312-1:2013 Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs	28.11.2013	EN 12312-1:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 12312-2:2014 Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles	13.2.2015	EN 12312-2:2002+A1:2009 Note 2.1	13.2.2015
CEN	EN 12312-3:2017 Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles	9.6.2017	EN 12312-3:2003+A1:2009 Note 2.1	31.7.2017
CEN	EN 12312-4:2014 Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges	11.7.2014	EN 12312-4:2003+A1:2009 Note 2.1	30.9.2014
CEN	EN 12312-5:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment	8.9.2009
CEN	EN 12312-6:2017 Aircraft ground support equipment — Specific requirements — Part 6: Deicers and de-icing/anti-icing equipment	9.6.2017	EN 12312-6:2004+A1:2009 Note 2.1	30.9.2017
CEN	EN 12312-7:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 7: Aircraft movement equipment	8.9.2009
CEN	EN 12312-8:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms	8.9.2009
CEN	EN 12312-9:2013 Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders	28.11.2013	EN 12312-9:2005+A1:2009 Note 2.1	28.11.2013
CEN	EN 12312-10:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters	8.9.2009
CEN	EN 12312-12:2017 Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment	This is the first publication	EN 12312-12:2002+A1:2009 Note 2.1	30.6.2018
CEN	EN 12312-13:2017 Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment	This is the first publication	EN 12312-13:2002+A1:2009 Note 2.1	30.6.2018
CEN	EN 12312-14:2014 Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles	13.2.2015	EN 12312-14:2006+A1:2009 Note 2.1	13.2.2015
CEN	EN 12312-15:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors	8.9.2009
CEN	EN 12312-16:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment	8.9.2009
CEN	EN 12312-17:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment	8.9.2009
CEN	EN 12312-18:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units	8.9.2009
CEN	EN 12312-19:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions	8.9.2009
CEN	EN 12312-20:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units	8.9.2009
CEN	EN 12321:2003+A1:2009 Underground mining machinery — Specification for the safety requirements of armoured face conveyors	8.9.2009
CEN	EN 12331:2003+A2:2010 Food processing machinery — Mincing machines — Safety and hygiene requirements	20.10.2010
CEN	EN 12348:2000+A1:2009 Core drilling machines on stand — Safety	8.9.2009
CEN	EN 12355:2003+A1:2010 Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements	20.10.2010
CEN	EN 12385-1:2002+A1:2008 Steel wire ropes — Safety — Part 1: General requirements	8.9.2009
CEN	EN 12385-2:2002+A1:2008 Steel wire ropes — Safety — Part 2: Definitions, designation and classification	8.9.2009
CEN	EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance	8.9.2009
CEN	EN 12385-4:2002+A1:2008 Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications	8.9.2009
CEN	EN 12385-10:2003+A1:2008 Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications	8.9.2009
CEN	EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements	18.12.2009
CEN	EN 12409:2008+A1:2011 Plastics and rubber machines — Thermoforming machines — Safety requirements	29.2.2012	EN 12409:2008 Note 2.1	30.4.2012
CEN	EN 12417:2001+A2:2009 Machine tools — Safety — Machining centres	8.9.2009
	EN 12417:2001+A2:2009/AC:2010
CEN	EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site — Safety	8.9.2009
CEN	EN 12463:2004+A1:2011 Food processing machinery — Filling machines and auxiliary machines — Safety and hygiene requirements	20.7.2011
CEN	EN 12505:2000+A1:2009 Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements	18.12.2009
CEN	EN 12525:2000+A2:2010 Agricultural machinery — Front loaders — Safety	26.5.2010
CEN	EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements	8.9.2009
CEN	EN 12547:2014 Centrifuges — Common safety requirements	15.1.2016	EN 12547:1999+A1:2009 Note 2.1	29.2.2016
CEN	EN 12549:1999+A1:2008 Acoustics — Noise test code for fastener driving tools — Engineering method	8.9.2009
CEN	EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements	20.10.2010
CEN	EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements	20.10.2010
CEN	EN 12622:2009+A1:2013 Safety of machine tools — Hydraulic press brakes	11.4.2014	EN 12622:2009 Note 2.1	30.4.2014
CEN	EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements	8.4.2011
CEN	EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines	8.4.2011
CEN	EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines	8.4.2011
CEN	EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4: Concrete roof tile making machines	8.4.2011
CEN	EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-1: Pipe making machines manufacturing in the vertical axis	8.4.2011
CEN	EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-2: Pipe making machines manufacturing in the horizontal axis	8.4.2011
CEN	EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-3: Pipe prestressing machines	8.4.2011
CEN	EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-4: Concrete pipe coating machines	8.4.2011
CEN	EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products	8.4.2011
CEN	EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products	8.4.2011
CEN	EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)	8.4.2011
CEN	EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates — Installation and use	8.9.2009
Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC.
CEN	EN 12643:2014 Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified)	11.7.2014	EN 12643:1997+A1:2008 Note 2.1	31.8.2014
CEN	EN 12644-1:2001+A1:2008 Cranes — Information for use and testing — Part 1: Instructions	8.9.2009
CEN	EN 12644-2:2000+A1:2008 Cranes — Information for use and testing — Part 2: Marking	8.9.2009
CEN	EN 12649:2008+A1:2011 Concrete compactors and smoothing machines — Safety	18.11.2011	EN 12649:2008 Note 2.1	31.1.2012
CEN	EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements	18.12.2009
CEN	EN 12693:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors	8.9.2009
CEN	EN 12717:2001+A1:2009 Safety of machine tools — Drilling machines	8.9.2009
CEN	EN 12733:2001+A1:2009 Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety	8.9.2009
CEN	EN 12750:2013 Safety of woodworking machines — Four sided moulding machines	28.11.2013	EN 12750:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements	20.10.2010
CEN	EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing	20.10.2010
CEN	EN 12779:2015 Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety requirements	13.5.2016	EN 12779:2004+A1:2009 Note 2.1	31.5.2016
CEN	EN 12852:2001+A1:2010 Food processing machinery — Food processors and blenders — Safety and hygiene requirements	20.10.2010
CEN	EN 12853:2001+A1:2010 Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements	20.10.2010
	EN 12853:2001+A1:2010/AC:2010
CEN	EN 12854:2003+A1:2010 Food processing machinery — Beam mixers — Safety and hygiene requirements	26.5.2010
CEN	EN 12855:2003+A1:2010 Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements	20.10.2010
CEN	EN 12881-1:2014 Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests	13.2.2015	EN 12881-1:2005+A1:2008 Note 2.1	13.2.2015
CEN	EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test	8.9.2009
CEN	EN 12882:2015 Conveyor belts for general purpose use — Electrical and flammability safety requirements	15.1.2016	EN 12882:2008 Note 2.1	29.2.2016
CEN	EN 12921-1:2005+A1:2010 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 1: Common safety requirements	20.10.2010
CEN	EN 12921-2:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids	8.9.2009
CEN	EN 12921-3:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids	8.9.2009
CEN	EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents	8.9.2009
CEN	EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety	18.12.2009
CEN	EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods	18.12.2009
CEN	EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements	8.9.2009
CEN	EN 12984:2005+A1:2010 Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements	20.10.2010
CEN	EN 12999:2011+A1:2012 Cranes — Loader cranes	24.8.2012	EN 12999:2011 Note 2.1	31.12.2012
CEN	EN 13000:2010+A1:2014 Cranes — Mobile cranes	13.2.2015	EN 13000:2010 Note 2.1	13.2.2015
CEN	EN 13001-1:2015 Cranes — General design — Part 1: General principles and requirements	15.1.2016	EN 13001-1:2004+A1:2009 Note 2.1	29.2.2016
CEN	EN 13001-2:2014 Crane safety — General design — Part 2: Load actions	15.1.2016	EN 13001-2:2011 Note 2.1	29.2.2016
CEN	EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure	28.11.2013	EN 13001-3-1:2012 Note 2.1	31.1.2014
CEN	EN 13001-3-2:2014 Cranes — General design — Part 3-2: Limit states and proof of competence of wire ropes in reeving systems	15.1.2016
CEN	EN 13001-3-3:2014 Cranes — General design — Part 3-3: Limit states and proof of competence of wheel/rail contacts	15.1.2016
CEN	EN 13001-3-5:2016 Cranes — General design — Part 3-5: Limit states and proof of competence of forged hooks	9.6.2017
CEN	EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions	8.9.2009
CEN	EN 13019:2001+A1:2008 Machines for road surface cleaning — Safety requirements	8.9.2009
CEN	EN 13020:2015 Road surface treatment machines — Safety requirements	13.5.2016	EN 13020:2004+A1:2010 Note 2.1	31.5.2016
CEN	EN 13021:2003+A1:2008 Winter service machines — Safety requirements	8.9.2009
CEN	EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3	26.5.2010
CEN	EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory	8.9.2009
CEN	EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory	8.9.2009
CEN	EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines	18.12.2009
	EN 13035-3:2003+A1:2009/AC:2010
CEN	EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables	26.5.2010
CEN	EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking	26.5.2010
CEN	EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out	26.5.2010
CEN	EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass	26.5.2010
CEN	EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations	26.5.2010
CEN	EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines	26.5.2010
CEN	EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder	18.12.2009
CEN	EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding	18.12.2009
CEN	EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines	18.12.2009
CEN	EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses	18.12.2009
CEN	EN 13059:2002+A1:2008 Safety of industrial trucks — Test methods for measuring vibration	8.9.2009
CEN	EN 13102:2005+A1:2008 Ceramic machines — Safety — Loading and unloading of fine clay tiles	8.9.2009
CEN	EN 13112:2002+A1:2009 Tannery machines — Splitting and bandknife shearing machines — Safety requirements	26.5.2010
CEN	EN 13113:2002+A1:2010 Tannery machines — Roller coating machines — Safety requirements	8.4.2011
CEN	EN 13114:2002+A1:2009 Tannery machines — Rotating process vessels — Safety requirements	26.5.2010
CEN	EN 13118:2000+A1:2009 Agricultural machinery — Potato harvesting equipment — Safety	18.12.2009
CEN	EN 13120:2009+A1:2014 Internal blinds — Performance requirements including safety	11.7.2014	EN 13120:2009 Note 2.1	31.8.2014
	EN 13120:2009+A1:2014/AC:2015
CEN	EN 13128:2001+A2:2009 Safety of machine tools — Milling machines (including boring machines)	8.9.2009
	EN 13128:2001+A2:2009/AC:2010
CEN	EN 13135:2013 Cranes — Safety — Design — Requirements for equipment	28.11.2013	EN 13135-1:2003+A1:2010 EN 13135-2:2004+A1:2010 Note 2.1	28.11.2013
CEN	EN 13140:2000+A1:2009 Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety	18.12.2009
CEN	EN 13155:2003+A2:2009 Cranes — Safety — Non-fixed load lifting attachments	8.9.2009
CEN	EN 13157:2004+A1:2009 Cranes — Safety — Hand powered cranes	18.12.2009
CEN	EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use — Safety and performance requirements	9.6.2017	EN 13204:2004+A1:2012 Note 2.1	30.11.2017
CEN	EN 13208:2003+A1:2010 Food processing machinery — Vegetable peelers — Safety and hygiene requirements	20.10.2010
CEN	EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics	9.6.2017	EN 13241-1:2003+A1:2011 Note 2.1	30.6.2018
CEN	EN 13288:2005+A1:2009 Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements	26.5.2010
CEN	EN 13289:2001+A1:2013 Pasta processing plants — Dryers and coolers — Safety and hygiene requirements	28.11.2013
CEN	EN 13355:2004+A1:2009 Coating plants — Combined booths — Safety requirements	8.9.2009
CEN	EN 13367:2005+A1:2008 Ceramic machines — Safety — Transfer platforms and cars	8.9.2009
	EN 13367:2005+A1:2008/AC:2009
CEN	EN 13378:2001+A1:2013 Pasta processing plants — Pasta presses — Safety and hygiene requirements	28.11.2013
CEN	EN 13379:2001+A1:2013 Pasta processing plants — Spreader, stripping and cutting machine, stick return conveyor, stick magazine — Safety and hygiene requirements	28.11.2013
CEN	EN 13389:2005+A1:2009 Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements	26.5.2010
CEN	EN 13390:2002+A1:2009 Food processing machinery — Pie and tart machines — Safety and hygiene requirements	26.5.2010
CEN	EN 13411-1:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings	8.9.2009
CEN	EN 13411-2:2001+A1:2008 Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings	8.9.2009
CEN	EN 13411-3:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing	8.9.2009
CEN	EN 13411-4:2011 Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing	20.7.2011	EN 13411-4:2002+A1:2008 Note 2.1	30.9.2011
CEN	EN 13411-5:2003+A1:2008 Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips	8.9.2009
CEN	EN 13411-6:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket	8.9.2009
CEN	EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket	8.9.2009
CEN	EN 13411-8:2011 Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging	18.11.2011
CEN	EN 13414-1:2003+A2:2008 Steel wire rope slings — Safety — Part 1: Slings for general lifting service	8.9.2009
CEN	EN 13414-2:2003+A2:2008 Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer	8.9.2009
CEN	EN 13414-3:2003+A1:2008 Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings	8.9.2009
CEN	EN 13418:2013 Plastics and rubber machines — Winding machines for film or sheet — Safety requirements	28.11.2013	EN 13418:2004+A1:2008 Note 2.1	30.11.2013
CEN	EN 13448:2001+A1:2009 Agricultural and forestry machinery — Inter-row mowing units — Safety	18.12.2009
CEN	EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements	20.10.2010
CEN	EN ISO 13482:2014 Robots and robotic devices — Safety requirements for personal care robots (ISO 13482:2014)	11.7.2014
CEN	EN 13524:2003+A2:2014 Highway maintenance machines — Safety requirements	11.7.2014	EN 13524:2003+A1:2009 Note 2.1	31.8.2014
CEN	EN 13531:2001+A1:2008 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified)	8.9.2009
CEN	EN 13534:2006+A1:2010 Food processing machinery — Curing injection machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13557:2003+A2:2008 Cranes — Controls and control stations	8.9.2009
CEN	EN 13561:2015 External blinds and awnings — Performance requirements including safety	15.1.2016	EN 13561:2004+A1:2008 Note 2.1	28.2.2017
	EN 13561:2015/AC:2016
CEN	EN 13570:2005+A1:2010 Food processing machinery — Mixing machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13586:2004+A1:2008 Cranes — Access	8.9.2009
CEN	EN 13591:2005+A1:2009 Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements	26.5.2010
CEN	EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units	24.8.2012	EN 13617-1:2004+A1:2009 Note 2.1	30.11.2012
CEN	EN 13621:2004+A1:2010 Food processing machinery — Salad dryers — Safety and hygiene requirements	20.10.2010
CEN	EN 13659:2015 Shutters and external venetian blinds — Performance requirements including safety	15.1.2016	EN 13659:2004+A1:2008 Note 2.1	28.2.2017
CEN	EN 13675:2004+A1:2010 Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment	20.10.2010
CEN	EN 13683:2003+A2:2011 Garden equipment — Integrally powered shredders/chippers — Safety	20.7.2011
	EN 13683:2003+A2:2011/AC:2013
CEN	EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety	26.5.2010	EN 13684:2004+A2:2009 Note 2.1	30.6.2010
CEN	EN 13731:2007 Lifting bag systems for fire and rescue service use — Safety and performance requirements	8.9.2009
CEN	EN 13732:2013 Food processing machinery — Bulk milk coolers on farms — Requirements for performance, safety and hygiene	28.11.2013	EN 13732:2002+A2:2009 Note 2.1	31.1.2014
CEN	EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses	8.9.2009
CEN	EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes	28.11.2013
CEN	EN 13862:2001+A1:2009 Floor cutting-off machines — Safety	8.9.2009
CEN	EN 13870:2015 Food processing machinery — Portion cutting machines — Safety and hygiene requirements	15.1.2016	EN 13870:2005+A1:2010 Note 2.1	31.3.2016
CEN	EN 13871:2014 Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements	15.1.2016	EN 13871:2005+A1:2010 Note 2.1	29.2.2016
CEN	EN 13885:2005+A1:2010 Food processing machinery — Clipping machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13886:2005+A1:2010 Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements	26.5.2010
CEN	EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety	8.9.2009
CEN	EN 13951:2012 Liquid pumps — Safety requirements — Agrifoodstuffs equipment; Design rules to ensure hygiene in use	24.8.2012	EN 13951:2003+A1:2008 Note 2.1	31.10.2012
CEN	EN 13954:2005+A1:2010 Food processing machinery — Bread slicers — Safety and hygiene requirements	26.5.2010
CEN	EN 13977:2011 Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance	20.7.2011
CEN	EN 13985:2003+A1:2009 Machine tools — Safety — Guillotine shears	8.9.2009
CEN	EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages	18.12.2009
CEN	EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety	18.12.2009	EN 14017:2005+A1:2008 Note 2.1	31.1.2010
CEN	EN 14018:2005+A1:2009 Agricultural and forestry machinery — Seed drills — Safety	18.12.2009
CEN	EN 14033-3:2017 Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements	This is the first publication	EN 14033-3:2009+A1:2011 Note 2.1	30.6.2018
CEN	EN 14043:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with combined movements — Safety and performance requirements and test methods	11.7.2014	EN 14043:2005+A1:2009 Note 2.1	31.7.2014
CEN	EN 14044:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods	11.7.2014	EN 14044:2005+A1:2009 Note 2.1	31.7.2014
CEN	EN 14070:2003+A1:2009 Safety of machine tools — Transfer and special-purpose machines	8.9.2009
	EN 14070:2003+A1:2009/AC:2010
CEN	EN 14238:2004+A1:2009 Cranes — Manually controlled load manipulating devices	18.12.2009
CEN	EN ISO 14314:2009 Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004)	18.12.2009
CEN	EN 14439:2006+A2:2009 Cranes — Safety — Tower cranes	8.9.2009
CEN	EN 14462:2005+A1:2009 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3	8.9.2009
CEN	EN 14466:2005+A1:2008 Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests	8.9.2009
CEN	EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches	18.12.2009
	EN 14492-1:2006+A1:2009/AC:2010
CEN	EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists	18.12.2009
	EN 14492-2:2006+A1:2009/AC:2010
CEN	EN 14502-2:2005+A1:2008 Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations	8.9.2009
CEN	EN 14655:2005+A1:2010 Food processing machinery — Baguette slicers — Safety and hygiene requirements	26.5.2010
CEN	EN 14656:2006+A1:2010 Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals	20.10.2010
CEN	EN 14658:2005+A1:2010 Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining	26.5.2010
CEN	EN 14673:2006+A1:2010 Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals	20.10.2010
CEN	EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel	8.9.2009
CEN	EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces	20.10.2010
CEN	EN 14710-1:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements	8.9.2009
CEN	EN 14710-2:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements	8.9.2009
CEN	EN 14753:2007 Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel	8.9.2009
CEN	EN 14886:2008 Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements	8.9.2009
CEN	EN 14910:2007+A1:2009 Garden equipment — Walk-behind combustion engine powered trimmers — Safety	8.9.2009
CEN	EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces	8.9.2009
CEN	EN 14957:2006+A1:2010 Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements	26.5.2010
CEN	EN 14958:2006+A1:2009 Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements	8.9.2009
CEN	EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements	13.5.2016	EN 14973:2006+A1:2008 Note 2.1	31.5.2016
CEN	EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998)	8.9.2009
CEN	EN 14985:2012 Cranes — Slewing jib cranes	23.3.2012
CEN	EN 15000:2008 Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters	8.9.2009
CEN	EN 15011:2011+A1:2014 Cranes — Bridge and gantry cranes	11.7.2014	EN 15011:2011 Note 2.1	31.8.2014
CEN	EN ISO 15012-4:2016 Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements (ISO 15012-4:2016)	9.6.2017
CEN	EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site — Safety	8.9.2009
CEN	EN 15056:2006+A1:2009 Cranes — Requirements for container handling spreaders	8.9.2009
CEN	EN 15059:2009+A1:2015 Snow grooming equipment — Safety requirements	15.1.2016	EN 15059:2009 Note 2.1	29.2.2016
CEN	EN 15061:2007+A1:2008 Safety of machinery — Safety requirements for strip processing line machinery and equipment	8.9.2009
CEN	EN 15067:2007 Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements	8.9.2009
CEN	EN 15093:2008 Safety of Machinery — Safety requirements for hot flat rolling mills	8.9.2009
CEN	EN 15094:2008 Safety of Machinery — Safety requirements for cold flat rolling mills	8.9.2009
CEN	EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements	8.9.2009
CEN	EN 15162:2008 Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws	8.9.2009
CEN	EN 15163:2008 Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws	8.9.2009
CEN	EN 15164:2008 Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines	8.9.2009
CEN	EN 15166:2008 Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements	8.9.2009
CEN	EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies	8.9.2009
CEN	EN 15503:2009+A2:2015 Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety	13.5.2016	EN 15503:2009+A1:2013 Note 2.1	30.6.2017
CEN	EN 15572:2015 Machines and plants for mining and tooling of natural stone — Safety — Requirements for edge finishing machines	15.1.2016
CEN	EN 15695-1:2017 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures	This is the first publication	EN 15695-1:2009 Note 2.1	30.6.2018
CEN	EN 15695-2:2017 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures	This is the first publication	EN 15695-2:2009 Note 2.1	30.6.2018
CEN	EN 15700:2011 Safety for conveyor belts for winter sport or leisure use	29.2.2012
CEN	EN ISO 15744:2008 Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002)	8.9.2009
CEN	EN 15746-2:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements	29.2.2012	EN 15746-2:2010 Note 2.1	30.4.2012
CEN	EN 15774:2010 Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements	8.4.2011
CEN	EN 15811:2014 Agricultural machinery — Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)	15.1.2016	EN 15811:2009 Note 2.1	29.2.2016
CEN	EN 15830:2012 Rough-terrain variable reach trucks — Visibility — Test methods and verification	24.8.2012
CEN	EN 15861:2012 Food processing machinery — Smokehouses — Safety and hygiene requirements	24.8.2012
CEN	EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools	18.11.2011
CEN	EN 15949:2012 Safety of machinery — Safety requirements for bar mills, structural steel mills and wire rod mills	5.6.2012
CEN	EN 15954-2:2013 Railway applications — Track — Trailers and associated equipment — Part 2: General safety requirements	28.11.2013
CEN	EN 15955-2:2013 Railway applications — Track — Demountable machines and associated equipment — Part 2: General safety requirements	28.11.2013
CEN	EN 15997:2011 All terrain vehicles (ATVs — Quads) — Safety requirements and test methods	29.2.2012
	EN 15997:2011/AC:2012
CEN	EN 16005:2012 Power operated pedestrian doorsets — Safety in use — Requirements and test methods	5.4.2013
	EN 16005:2012/AC:2015
CEN	EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads — Single-track two-wheel motor vehicles — Safety requirements and test methods	24.8.2012
CEN	EN ISO 16089:2015 Machine tools — Safety — Stationary grinding machines (ISO 16089:2015)	13.5.2016	EN 13218:2002+A1:2008 Note 2.1	30.6.2017
CEN	EN ISO 16093:2017 Machine tools — Safety — Sawing machines for cold metal (ISO 16093:2017)	This is the first publication	EN 13898:2003+A1:2009 Note 2.1	30.6.2018
CEN	EN ISO 16119-1:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General (ISO 16119-1:2013)	28.11.2013
CEN	EN ISO 16119-2:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)	28.11.2013
CEN	EN ISO 16119-3:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)	28.11.2013
CEN	EN ISO 16119-4:2014 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)	15.1.2016
CEN	EN 16191:2014 Tunnelling machinery — Safety requirements	13.2.2015	EN 815:1996+A2:2008 EN 12336:2005+A1:2008 Note 2.1	13.2.2015
CEN	EN 16203:2014 Safety of Industrial Trucks — Dynamic tests for verification of lateral stability — Counterbalanced Trucks	13.2.2015
CEN	EN 16228-1:2014 Drilling and foundation equipment — Safety — Part 1: Common requirements	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-2:2014 Drilling and foundation equipment — Safety — Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-3:2014 Drilling and foundation equipment — Safety — Part 3: Horizontal directional drilling equipment (HDD)	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-4:2014 Drilling and foundation equipment — Safety — Part 4: Foundation equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-5:2014 Drilling and foundation equipment — Safety — Part 5: Diaphragm walling equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-6:2014 Drilling and foundation equipment — Safety — Part 6: Jetting, grouting and injection equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-7:2014 Drilling and foundation equipment — Safety — Part 7: Interchangeable auxiliary equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16230-1:2013+A1:2014 Leisure karts — Part 1: Safety requirements and test methods for karts	15.1.2016	EN 16230-1:2013 Note 2.1	29.2.2016
CEN	EN ISO 16230-1:2015 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements (ISO 16230-1:2015)	15.1.2016
CEN	EN ISO 16231-1:2013 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles (ISO 16231-1:2013)	28.11.2013
CEN	EN ISO 16231-2:2015 Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)	15.1.2016
CEN	EN 16246:2012 Agricultural machinery — Backhoes — Safety	5.4.2013
CEN	EN 16252:2012 Machines for compacting waste materials or recyclable fractions — Horizontal baling presses — Safety requirements	5.4.2013
CEN	EN 16307-1:2013+A1:2015 Industrial trucks — Safety requirements and verification — Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks	15.1.2016	EN 16307-1:2013 Note 2.1	29.2.2016
CEN	EN 16307-5:2013 Industrial trucks — Safety requirements and verification — Part 5: Supplementary requirements for pedestrian-propelled trucks	11.7.2014
CEN	EN 16307-6:2014 Industrial trucks — Safety requirements and verification — Part 6: Supplementary requirements for burden and personnel carriers	11.7.2014
CEN	EN 16327:2014 Fire-fighting — Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)	11.7.2014
CEN	EN 16474:2015 Plastics and rubber machines — Tyre curing machines — Safety requirements	15.1.2016
CEN	EN 16486:2014 Machines for compacting waste materials or recyclable fractions — Compactors — Safety requirements	15.1.2016
CEN	EN 16500:2014 Machines for compacting waste materials or recyclable fractions — Vertical baling presses — Safety requirements	15.1.2016
CEN	EN 16590-3:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)	13.2.2015
CEN	EN 16590-4:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)	13.2.2015
CEN	EN 16743:2016 Food processing machinery — Automatic industrial slicing machines — Safety and hygiene requirements	9.9.2016
CEN	EN 16774:2016 Safety of machinery — Safety requirements for steel converter and associated equipment	9.9.2016
CEN	EN 16851:2017 Cranes — Light crane systems	9.6.2017
CEN	EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016)	9.9.2016
CEN	EN ISO 18217:2015 Safety of woodworking machines — Edge-banding machines fed by chain(s) (ISO 18217:2015)	15.1.2016	EN 1218-4:2004+A2:2009 Note 2.1	31.3.2016
CEN	EN ISO 19085-1:2017 Woodworking machines — Safety — Part 1: Common requirements (ISO 19085-1:2017)	This is the first publication
CEN	EN ISO 19085-2:2017 Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017)	This is the first publication
CEN	EN ISO 19085-5:2017 Woodworking machines — Safety — Part 5: Dimension saws (ISO 19085-5:2017)	This is the first publication	EN 1870-18:2013 Note 2.1	30.6.2018
CEN	EN ISO 19432:2012 Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements (ISO 19432:2012)	15.11.2012	EN ISO 19432:2008 Note 2.1	31.1.2013
CEN	EN ISO 19932-1:2013 Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements (ISO 19932-1:2013)	28.11.2013
CEN	EN ISO 19932-2:2013 Equipment for crop protection — Knapsack sprayers — Part 2: Test methods (ISO 19932-2:2013)	28.11.2013
CEN	EN ISO 20361:2015 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2015)	9.9.2016	EN ISO 20361:2009 Note 2.1	31.12.2015
CEN	EN ISO 22867:2011 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011)	29.2.2012	EN ISO 22867:2008 Note 2.1	30.6.2012
CEN	EN ISO 22868:2011 Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2011)	20.7.2011	EN ISO 22868:2008 Note 2.1	30.9.2011
CEN	EN ISO 23125:2015 Machine tools — Safety — Turning machines (ISO 23125:2015, Corrected version 2016-03-15)	15.1.2016	EN ISO 23125:2010 Note 2.1	29.2.2016
CEN	EN ISO 28139:2009 Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009)	18.12.2009
CEN	EN ISO 28881:2013 Machine tools — Safety — Electro-discharge machines (ISO 28881:2013)	28.11.2013	EN 12957:2001+A1:2009 Note 2.1	28.2.2014
	EN ISO 28881:2013/AC:2013
CEN	EN ISO 28927-1:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009)	26.5.2010
	EN ISO 28927-1:2009/A1:2017	This is the first publication	Note 3	30.6.2018
CEN	EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)	26.5.2010
CEN	EN ISO 28927-3:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)	26.5.2010
CEN	EN ISO 28927-4:2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010)	8.4.2011
CEN	EN ISO 28927-5:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009)	26.5.2010
	EN ISO 28927-5:2009/A1:2015	15.1.2016	Note 3	31.3.2016
CEN	EN ISO 28927-6:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009)	26.5.2010
CEN	EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009)	26.5.2010
CEN	EN ISO 28927-8:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)	26.5.2010
	EN ISO 28927-8:2009/A1:2015	13.5.2016	Note 3	30.6.2016
CEN	EN ISO 28927-9:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)	26.5.2010
CEN	EN ISO 28927-10:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)	18.11.2011
CEN	EN ISO 28927-11:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers (ISO 28927-11:2011)	20.7.2011
CEN	EN ISO 28927-12:2012 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders (ISO 28927-12:2012)	5.4.2013
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.
Cenelec	EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified)	26.5.2010
	EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008	26.5.2010	Note 3	1.2.2012
	EN 60204-1:2006/AC:2010
Cenelec	EN 60204-11:2000 Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000	26.5.2010
	EN 60204-11:2000/AC:2010
Cenelec	EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008	18.12.2009
Cenelec	EN 60204-33:2011 Safety of machinery — Electrical equipment of machines — Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified)	18.11.2011
Cenelec	EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007	18.12.2009
Cenelec	EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007	18.12.2009
Cenelec	EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007	18.12.2009
Cenelec	EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2012	11.4.2014	EN 61496-1:2004 + A1:2008 Note 2.1	10.5.2015
Cenelec	EN 61800-5-2:2007 Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional IEC 61800-5-2:2007	18.12.2009
Cenelec	EN 62061:2005 Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005	26.5.2010
	EN 62061:2005/A1:2013 IEC 62061:2005/A1:2012	28.11.2013	Note 3	18.12.2015
	EN 62061:2005/AC:2010
	EN 62061:2005/A2:2015 IEC 62061:2005/A2:2015	15.1.2016	Note 3	31.7.2018
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturerÂ ¿s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.
Cenelec	EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements	15.1.2016	EN 50223:2010 Note 2.1	13.4.2018
Cenelec	EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements	26.5.2010
	EN 50348:2010/AC:2010
Cenelec	EN 50434:2014 Safety of household and similar appliances — Particular requirements for mains operated shredders and chippers	13.2.2015
Cenelec	EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors	11.4.2014
Cenelec	EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers	11.4.2014
Cenelec	EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines	11.4.2014
Cenelec	EN 50580:2012 Safety of hand-held electric motor operated tools — Particular requirements for spray guns	5.6.2012
	EN 50580:2012/A1:2013	28.11.2013	Note 3	22.7.2016
Cenelec	EN 50636-2-91:2014 Household and similar electrical appliances — Safety — Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers IEC 60335-2-91:2008 (Modified)	13.2.2015
Cenelec	EN 50636-2-92:2014 Household and similar electrical appliances — Safety — Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators IEC 60335-2-92:2002 (Modified)	13.2.2015
Cenelec	EN 50636-2-94:2014 Household and similar electrical appliances — Safety — Part 2-94: Particular requirements for scissors type grass shears IEC 60335-2-94:2008 (Modified)	13.2.2015
Cenelec	EN 50636-2-100:2014 Household and similar electrical appliances — Safety — Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums IEC 60335-2-100:2002 (Modified)	13.2.2015
Cenelec	EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers IEC 60335-2-107:2012 (Modified)	15.1.2016
Cenelec	EN 60204-31:2013 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013	11.4.2014
Cenelec	EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2010 (Modified)	5.6.2012	EN 60335-1:2002 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + A1:2004 Note 2.1	21.11.2014
	EN 60335-1:2012/AC:2014
	EN 60335-1:2012/A11:2014	15.1.2016	Note 3	29.2.2016
Cenelec	EN 60335-2-8:2015 Household and similar electrical appliances — Safety — Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2012 (Modified)	13.5.2016
	EN 60335-2-8:2015/A1:2016 IEC 60335-2-8:2012/A1:2015	9.9.2016	Note 3	28.12.2018
Cenelec	EN 60335-2-23:2003 Household and similar electrical appliances — Safety — Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003	15.1.2016
	EN 60335-2-23:2003/A2:2015 IEC 60335-2-23:2003/A2:2012 (Modified)	15.1.2016	Note 3	29.9.2017
Cenelec	EN 60335-2-36:2002 Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002	5.4.2013
	EN 60335-2-36:2002/AC:2007
	EN 60335-2-36:2002/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-37:2002 Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002	5.4.2013
	EN 60335-2-37:2002/AC:2007
	EN 60335-2-37:2002/A11:2012	5.4.2013	Note 3	13.2.2015
	EN 60335-2-37:2002/A12:2016	9.9.2016	Note 3	25.1.2019
Cenelec	EN 60335-2-40:2003 Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified)	28.11.2013
	EN 60335-2-40:2003/AC:2010
	EN 60335-2-40:2003/AC:2006
	EN 60335-2-40:2003/A11:2004	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A12:2005	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified)	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified)	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A13:2012	28.11.2013	Note 3	11.7.2014
	EN 60335-2-40:2003/A13:2012/AC:2013
Cenelec	EN 60335-2-42:2003 Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002	5.4.2013
	EN 60335-2-42:2003/AC:2007
	EN 60335-2-42:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-47:2003 Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002	5.4.2013
	EN 60335-2-47:2003/AC:2007
	EN 60335-2-47:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-48:2003 Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002	5.4.2013
	EN 60335-2-48:2003/AC:2007
	EN 60335-2-48:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-49:2003 Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002	5.4.2013
	EN 60335-2-49:2003/AC:2007
	EN 60335-2-49:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-65:2003 Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002	5.4.2013
	EN 60335-2-65:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-67:2012 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Modified)	15.11.2012	EN 60335-2-67:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-68:2012 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Modified)	15.11.2012	EN 60335-2-68:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-69:2012 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use IEC 60335-2-69:2012 (Modified)	15.11.2012	EN 60335-2-69:2009 Note 2.1	28.3.2015
Cenelec	EN 60335-2-72:2012 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use IEC 60335-2-72:2012 (Modified)	15.11.2012	EN 60335-2-72:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-77:2010 Safety of household and similar appliances — Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified)	8.4.2011
Cenelec	EN 60335-2-79:2012 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2012 (Modified)	15.11.2012	EN 60335-2-79:2009 Note 2.1	3.4.2015
Cenelec	EN 60335-2-89:2010 Household and similar electrical appliances — Safety — Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor IEC 60335-2-89:2010	9.9.2016
	EN 60335-2-89:2010/A1:2016 IEC 60335-2-89:2010/A1:2012 (Modified)	9.9.2016	Note 3	12.2.2019
	EN 60335-2-89:2010/A2:2017 IEC 60335-2-89:2010/A2:2015 (Modified)	This is the first publication	Note 3	3.7.2020
Cenelec	EN 60335-2-95:2015 Household and similar electrical appliances — Safety — Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use IEC 60335-2-95:2011 (Modified)	15.1.2016
	EN 60335-2-95:2015/A1:2015 IEC 60335-2-95:2011/A1:2015	15.1.2016	Note 3	15.6.2018
Cenelec	EN 60335-2-97:2006 Household and similar electrical appliances — Safety — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified)	15.1.2016
	EN 60335-2-97:2006/A12:2015	15.1.2016	Note 3	29.9.2017
Cenelec	EN 60335-2-102:2016 Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) IEC 60335-2-102:2004/A1:2008 (Modified) + A1:2008 (Modified) IEC 60335-2-102:2004/A2:2012 (Modified)	9.9.2016
Cenelec	EN 60335-2-103:2015 Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows IEC 60335-2-103:2006 (Modified) + A1:2010 (Modified)	15.1.2016
Cenelec	EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing — Part 1: General requirements IEC 60519-1:2015	15.1.2016
Cenelec	EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008	20.10.2010
Cenelec	EN 60745-2-3:2011 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified)	18.11.2011
	EN 60745-2-3:2011/A2:2013 IEC 60745-2-3:2006/A2:2012 (Modified)	28.11.2013	Note 3	25.2.2016
	EN 60745-2-3:2011/A11:2014	13.2.2015	Note 3	21.4.2016
	EN 60745-2-3:2011/A12:2014	15.1.2016	Note 3	17.11.2017
	EN 60745-2-3:2011/A13:2015	13.5.2016	Note 3	28.9.2018
Cenelec	EN 60745-2-6:2010 Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006	20.10.2010
Cenelec	EN 60745-2-11:2010 Hand-held motor-operated electric tools — Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008	20.10.2010
Cenelec	EN 60745-2-12:2009 Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-13:2009 Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified)	18.12.2009
	EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009	20.7.2011	Note 3	1.12.2013
Cenelec	EN 60745-2-15:2009 Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified)	18.12.2009
	EN 60745-2-15:2009/A1:2010 IEC 60745-2-15:2006/A1:2009	28.11.2013	Note 3	28.11.2013
Cenelec	EN 60745-2-16:2010 Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified)	8.4.2011
Cenelec	EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified)	8.4.2011
Cenelec	EN 60745-2-18:2009 Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-19:2009 Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified)	18.12.2009
	EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010	8.4.2011	Note 3	1.6.2013
Cenelec	EN 60745-2-20:2009 Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-21:2009 Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified)	18.12.2009
	EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008	20.7.2011	Note 3	1.12.2013
Cenelec	EN 60745-2-22:2011 Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified)	18.11.2011
	EN 60745-2-22:2011/A11:2013	28.11.2013	Note 3	17.12.2015
Cenelec	EN 60745-2-23:2013 Hand-held motor-operated electric tools — Safety — Part 2-23: Particular requirements for die grinders and small rotary tools IEC 60745-2-23:2012 (Modified)	28.11.2013
Cenelec	EN 60947-5-3:2013 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDDB) IEC 60947-5-3:2013	11.4.2014
Cenelec	EN 60947-5-5:1997 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997	28.11.2013
	EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005	28.11.2013	Note 3	28.11.2013
	EN 60947-5-5:1997/A11:2013	28.11.2013	Note 3	3.12.2015
	EN 60947-5-5:1997/A2:2017 IEC 60947-5-5:1997/A2:2016	9.6.2017	Note 3	24.2.2020
Cenelec	EN 61029-2-3:2011 Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001	18.11.2011
Cenelec	EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified)	18.11.2011
Cenelec	EN 61029-2-5:2011 Safety of transportable motor-operated electric tools — Part 2-5: Particular requirements for band saws IEC 61029-2-5:1993 (Modified) + A1:2001 (Modified)	15.1.2016
	EN 61029-2-5:2011/A11:2015	15.1.2016	Note 3	1.12.2016
Cenelec	EN 61029-2-8:2010 Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999	20.10.2010
Cenelec	EN 61029-2-9:2012 Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified)	5.4.2013	EN 61029-2-9:2009 Note 2.1	3.9.2015
	EN 61029-2-9:2012/A11:2013	28.11.2013	Note 3	12.8.2016
Cenelec	EN 61029-2-11:2012 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified)	5.4.2013	EN 61029-2-11:2009 Note 2.1	3.9.2015
	EN 61029-2-11:2012/A11:2013	28.11.2013	Note 3	12.8.2016
Cenelec	EN 61029-2-12:2011 Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified)	18.11.2011
Cenelec	EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 1: General requirements IEC 62841-1:2014 (Modified)	15.1.2016	EN 60335-1:2012 + A11:2014 EN 60745-1:2009 + A11:2010 EN 61029-1:2009 + A11:2010 Note 2.3	15.12.2021
	EN 62841-1:2015/AC:2015
Cenelec	EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) IEC 62841-2-2:2014	15.1.2016	EN 60745-2-2:2010 Note 2.1	21.8.2019
	EN 62841-2-2:2014/AC:2015
Cenelec	EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) IEC 62841-2-4:2014	15.1.2016	EN 60745-2-4:2009 + A11:2011 Note 2.1	21.8.2019
	EN 62841-2-4:2014/AC:2015
Cenelec	EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) IEC 62841-2-5:2014	15.1.2016	EN 60745-2-5:2010 Note 2.1	21.8.2019
Cenelec	EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-8: Particular requirements for hand-held shears and nibblers IEC 62841-2-8:2016 (Modified)	9.6.2017	EN 60745-2-8:2009 Note 2.1	2.5.2020
Cenelec	EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-9: Particular requirements for hand-held tappers and threaders IEC 62841-2-9:2015 (Modified)	15.1.2016	EN 60745-2-9:2009 Note 2.1	21.8.2019
	EN 62841-2-9:2015/AC:2016-10
Cenelec	EN 62841-2-10:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-10: Particular requirements for hand-held mixers IEC 62841-2-10:2017 (Modified)	This is the first publication
Cenelec	EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-11: Particular requirements for hand-held reciprocating saws IEC 62841-2-11:2015 (Modified)	9.9.2016	EN 60745-2-11:2010 Note 2.1	23.12.2019
Cenelec	EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-14: Particular requirements for hand-held planers IEC 62841-2-14:2015 (Modified)	13.5.2016	EN 60745-2-14:2009 + A2:2010 Note 2.1	31.8.2019
Cenelec	EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) IEC 62841-3-1:2014	15.1.2016	EN 61029-2-1:2012 Note 2.1	21.8.2019
	EN 62841-3-1:2014/AC:2015
Cenelec	EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) IEC 62841-3-6:2014	15.1.2016	EN 61029-2-6:2010 Note 2.1	21.8.2019
	EN 62841-3-6:2014/AC:2015
Cenelec	EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws IEC 62841-3-9:2014 (Modified)	13.5.2016	EN 61029-2-9:2012 + A11:2013 Note 2.1	15.11.2019
	EN 62841-3-9:2015/AC:2016-09
Cenelec	EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines IEC 62841-3-10:2015 (Modified)	13.5.2016	EN 61029-2-10:2010 + A11:2013 Note 2.1	19.10.2019
	EN 62841-3-10:2015/AC:2016-07
Cenelec	EN 62841-3-13:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-13: Particular requirements for transportable drills IEC 62841-3-13:2017 (Modified)	This is the first publication

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

—

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (²).

—

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

—

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

—	Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

—	This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

—	More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-s...

(¹) ESO: European standardisation organisation:

—	CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu)

—	CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu)

—	ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

(²) OJ C 338, 27.9.2014, p. 31.

Language English

Read more about Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018

§ 3 The recitals - application guide 2nd edition of the ATEX 2014/34/EU directive

Submitted by root on Tue, 02/27/2018 - 16:36

§ 3 The recitals

The recitals, also known as consideranda, introduce the main provisions of the Directive and present the reasons for their adoption. Some of the recitals explain the changes that have been made in the new ATEX Directive 2014/34/EU compared with the previous Directive 94/9/EC (basically, the alignment to the New Legislative Framework through the provisions of Decision No 768/2008/EC : see section § 5).

The recitals do not have legal force as such and do not usually figure in the national legislation transposing and implementing the Directive. However, they help to understand the Directive, in particular, by clarifying the meaning of certain provisions. When interpreting the text of the Directive, the Courts may take the recitals into consideration in order to ascertain the intention of the legislators.

(1) Directive 94/9/EC of the European Parliament and of the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (³) has been substantially amended (⁴). Since further amendments are to be made, that Directive should be recast in the interests of clarity.

__________

(3) OJ L 100, 19.4.1994, p. 1.

(4) See Annex XI, Part A.

Language English

Read more about § 3 The recitals - application guide 2nd edition of the ATEX 2014/34/EU directive

§ 2 The legal basis of the ATEX Directive : application guide 2nd edition of the ATEX 2014/34/EU directive

Submitted by root on Sun, 02/18/2018 - 13:47

§ 2 The legal basis of the ATEX Directive

The legal basis of the ATEX Directive 2014/34/EU is provided by Article 114 of the Treaty on the Functioning of the European Union (TFEU)^{^[1]} (ex-Article 95 of the EC Treaty)^{^[2]}^{^[3]} that enables the European Union to adopt measures to harmonise the legislation of the Member States in order to ensure the establishment and functioning of the single internal market. Such measures must take as a basis the highest possible level of protection of the health and safety of people and of the environment. The Directive thus has a dual objective: to permit the free movement of products with the internal market whilst ensuring a high level of protection of health and safety.

Following the proposal by the European Commission, the Directive was adopted by the European Parliament and the Council of the European Union after consulting the European Economic and Social Committee, according to the ordinary legislative procedure (formerly known as "co-decision") set out in Article 294 of the TFEU.

The footnotes to the citation give the references and dates of the successive steps of the procedure. The text of the ATEX Directive 2014/34/EU was published on the Official Journal of the European Union (OJEU) L 96, 29.3.2014, p. 309.

[1] OJ C 326, 26.10.2012, p. 47.

[2] Sometimes the ATEX "product" Directive (94/9/EC until 19 April 2016; 2014/34/EU as by 20 April

[3] ) is still referred to as “the ATEX 95 Directive”, when the ATEX "workplace" Directive 1999/92/EC is mentioned as "the ATEX 137 Directive", being based on the Article 153 of the TFEU (ex-Article 137 of the EC Treaty).

Language English

Read more about § 2 The legal basis of the ATEX Directive : application guide 2nd edition of the ATEX 2014/34/EU directive

§ 1 The citations - application guide 2nd edition of the ATEX 2014/34/EU directive

Submitted by root on Sun, 02/18/2018 - 13:43

§ 1 The citations

The citations included in the preamble to the ATEX Directive 2014/34/EU indicate the legal basis of the Directive, the opinions expressed by the relevant consultative Committee and the procedure according to which the Directive was adopted.

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof,

Having regard to the proposal from the European Commission,

After transmission of the draft legislative act to the national parliaments,

Having regard to the opinion of the European Economic and Social Committee (¹),

Acting in accordance with the ordinary legislative procedure (²),

__________

(1) OJ C 181, 21.6.2012, p. 105.

(2) Position of the European Parliament of 5 February 2014.

Language English

Read more about § 1 The citations - application guide 2nd edition of the ATEX 2014/34/EU directive

Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017

Submitted by root on Wed, 02/07/2018 - 14:30

9.6.2017

Official Journal of the European Union

C 183/14

Commission communication in the framework of the implementation of Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 183/02)

ESO	Reference and title of the standard (and reference document)	First publication OJ	Reference of superseded standard	Date of cessation of presumption of conformity of superseded standard Note 1
A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity.
CEN	EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010)	8.4.2011	EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1	30.11.2013
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.
CEN	EN 349:1993+A1:2008 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body	8.9.2009
CEN	EN 547-1:1996+A1:2008 Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery	8.9.2009
CEN	EN 547-2:1996+A1:2008 Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings	8.9.2009
CEN	EN 547-3:1996+A1:2008 Safety of machinery — Human body measurements — Part 3: Anthropometric data	8.9.2009
CEN	EN 574:1996+A1:2008 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design	8.9.2009
CEN	EN 614-1:2006+A1:2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles	8.9.2009
CEN	EN 614-2:2000+A1:2008 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks	8.9.2009
CEN	EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing	8.9.2009
CEN	EN 894-1:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators	8.9.2009
CEN	EN 894-2:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays	8.9.2009
CEN	EN 894-3:2000+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators	8.9.2009
CEN	EN 894-4:2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators	20.10.2010
CEN	EN 981:1996+A1:2008 Safety of machinery — System of auditory and visual danger and information signals	8.9.2009
CEN	EN 1005-1:2001+A1:2008 Safety of machinery — Human physical performance — Part 1: Terms and definitions	8.9.2009
CEN	EN 1005-2:2003+A1:2008 Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery	8.9.2009
CEN	EN 1005-3:2002+A1:2008 Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation	8.9.2009
CEN	EN 1005-4:2005+A1:2008 Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery	8.9.2009
CEN	EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value	8.9.2009
CEN	EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up	8.9.2009
CEN	EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods	8.9.2009
CEN	EN 1093-2:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant	8.9.2009
CEN	EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant	8.9.2009
CEN	EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method	8.9.2009
CEN	EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet	8.9.2009
CEN	EN 1093-7:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet	8.9.2009
CEN	EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method	8.9.2009
CEN	EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method	8.9.2009
CEN	EN 1093-11:2001+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index	8.9.2009
CEN	EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology	18.11.2011	EN 1127-1:2007 Note 2.1	31.7.2014
CEN	EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining	13.2.2015	EN 1127-2:2002+A1:2008 Note 2.1	13.2.2015
CEN	EN 1299:1997+A1:2008 Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation	8.9.2009
CEN	EN 1837:1999+A1:2009 Safety of machinery — Integral lighting of machines	18.12.2009
CEN	EN ISO 3741:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010)	8.4.2011	EN ISO 3741:2009 Note 2.1	30.4.2011
CEN	EN ISO 3743-1:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)	8.4.2011	EN ISO 3743-1:2009 Note 2.1	30.4.2011
CEN	EN ISO 3743-2:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)	18.12.2009
CEN	EN ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)	8.4.2011	EN ISO 3744:2009 Note 2.1	30.4.2011
CEN	EN ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)	5.6.2012	EN ISO 3745:2009 Note 2.1	30.9.2012
CEN	EN ISO 3746:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)	8.4.2011	EN ISO 3746:2009 Note 2.1	30.6.2011
CEN	EN ISO 3747:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)	8.4.2011	EN ISO 3747:2009 Note 2.1	30.6.2011
CEN	EN ISO 4413:2010 Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010)	8.4.2011	EN 982:1996+A1:2008 Note 2.1	30.11.2011
CEN	EN ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010)	8.4.2011	EN 983:1996+A1:2008 Note 2.1	30.11.2011
CEN	EN ISO 4871:2009 Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)	18.12.2009
CEN	EN ISO 5136:2009 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003)	18.12.2009
CEN	EN ISO 7235:2009 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003)	18.12.2009
CEN	EN ISO 7731:2008 Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003)	8.9.2009
CEN	EN ISO 9614-1:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993)	18.12.2009
CEN	EN ISO 9614-3:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)	18.12.2009
CEN	EN ISO 10326-1:2016 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)	This is the first publication	EN 30326-1:1994 Note 2.1	30.11.2017
CEN	EN ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007)	26.5.2010
	EN ISO 11161:2007/A1:2010	26.5.2010	Note 3	30.9.2010
CEN	EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)	13.2.2015	EN ISO 11200:2009 Note 2.1	13.2.2015
CEN	EN ISO 11201:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)	20.10.2010	EN ISO 11201:2009 Note 2.1	30.11.2010
CEN	EN ISO 11202:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)	20.10.2010	EN ISO 11202:2009 Note 2.1	30.11.2010
CEN	EN ISO 11203:2009 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)	18.12.2009
CEN	EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)	20.10.2010	EN ISO 11204:2009 Note 2.1	30.11.2010
CEN	EN ISO 11205:2009 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)	18.12.2009
CEN	EN ISO 11546-1:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)	18.12.2009
CEN	EN ISO 11546-2:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)	18.12.2009
CEN	EN ISO 11554:2008 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)	8.9.2009
CEN	EN ISO 11688-1:2009 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995)	18.12.2009
CEN	EN ISO 11691:2009 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995)	18.12.2009
CEN	EN ISO 11957:2009 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996)	18.12.2009
CEN	EN 12198-1:2000+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles	8.9.2009
CEN	EN 12198-2:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure	8.9.2009
CEN	EN 12198-3:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening	8.9.2009
CEN	EN 12254:2010 Screens for laser working places — Safety requirements and testing	26.5.2010	EN 12254:1998+A2:2008 Note 2.1	30.9.2010
	EN 12254:2010/AC:2011
CEN	EN 12786:2013 Safety of machinery — Requirements for the drafting of the vibration clauses of safety standards	28.11.2013
CEN	EN 13490:2001+A1:2008 Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration	8.9.2009
CEN	EN ISO 13732-1:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)	8.9.2009
CEN	EN ISO 13732-3:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005)	8.9.2009
CEN	EN ISO 13753:2008 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)	8.9.2009
CEN	EN ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2015)	13.5.2016	EN ISO 13849-1:2008 Note 2.1	30.6.2016
CEN	EN ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2012)	5.4.2013	EN ISO 13849-2:2008 Note 2.1	30.4.2013
CEN	EN ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design (ISO 13850:2015)	13.5.2016	EN ISO 13850:2008 Note 2.1	31.5.2016
CEN	EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)	20.10.2010	EN 999:1998+A1:2008 Note 2.1	30.11.2010
CEN	EN ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)	28.11.2013	EN 1760-1:1997+A1:2009 Note 2.1	28.11.2013
CEN	EN ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)	28.11.2013	EN 1760-2:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)	28.11.2013	EN 1760-3:2004+A1:2009 Note 2.1	31.1.2014
CEN	EN ISO 13857:2008 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)	8.9.2009
CEN	EN ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection (ISO 14119:2013)	11.4.2014	EN 1088:1995+A2:2008 Note 2.1	30.4.2015
CEN	EN ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)	13.5.2016	EN 953:1997+A1:2009 Note 2.1	31.5.2016
CEN	EN ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)	9.9.2016	EN ISO 14122-1:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2016)	9.9.2016	EN ISO 14122-2:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)	9.9.2016	EN ISO 14122-3:2001 Note 2.1	31.12.2016
CEN	EN ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2016)	9.9.2016	EN ISO 14122-4:2004 Note 2.1	31.12.2016
CEN	EN ISO 14123-1:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)	13.5.2016	EN 626-1:1994+A1:2008 Note 2.1	31.5.2016
CEN	EN ISO 14123-2:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)	13.5.2016	EN 626-2:1996+A1:2008 Note 2.1	30.6.2016
CEN	EN ISO 14159:2008 Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002)	8.9.2009
CEN	EN ISO 14738:2008 Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)	8.9.2009
CEN	EN ISO 15536-1:2008 Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005)	8.9.2009
CEN	EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours	18.11.2011
CEN	EN 16590-1:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development (ISO 25119-1:2010 modified)	13.2.2015
CEN	EN 16590-2:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase (ISO 25119-2:2010 modified)	13.2.2015
CEN	EN ISO 19353:2016 Safety of machinery — Fire prevention and fire protection (ISO 19353:2015)	9.9.2016	EN 13478:2001+A1:2008 Note 2.1	31.7.2016
CEN	EN ISO 20643:2008 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005)	8.9.2009
	EN ISO 20643:2008/A1:2012	15.11.2012	Note 3	31.1.2013
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturerÂ ¿s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.
CEN	EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts	8.9.2009
	EN 81-3:2000+A1:2008/AC:2009
CEN	EN 81-31:2010 Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts	20.10.2010
CEN	EN 81-40:2008 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility	8.9.2009
CEN	EN 81-41:2010 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility	8.4.2011
CEN	EN 81-43:2009 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes	8.9.2009
CEN	EN 115-1:2008+A1:2010 Safety of escalators and moving walks — Part 1: Construction and installation	26.5.2010	EN 115-1:2008 Note 2.1	30.9.2010
CEN	EN 201:2009 Plastics and rubber machines — Injection moulding machines — Safety requirements	18.12.2009
CEN	EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels	18.11.2011	EN 267:2009 Note 2.1	29.2.2012
CEN	EN 280:2013+A1:2015 Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests	15.1.2016	EN 280:2013 Note 2.1	28.2.2017
CEN	EN 289:2014 Plastics and rubber machines — Compression moulding machines and transfer moulding machines — Safety requirements	13.2.2015	EN 289:2004+A1:2008 Note 2.1	13.2.2015
CEN	EN 303-5:2012 Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking	24.8.2012
CEN	EN 378-2:2016 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation	This is the first publication	EN 378-2:2008+A2:2012 Note 2.1	30.11.2017
CEN	EN 415-1:2014 Safety of packaging machines — Part 1: Terminology and classification of packaging machines and associated equipment	15.1.2016	EN 415-1:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 415-3:1999+A1:2009 Safety of packaging machines — Part 3: Form, fill and seal machines	18.12.2009
CEN	EN 415-5:2006+A1:2009 Safety of packaging machines — Part 5: Wrapping machines	18.12.2009
CEN	EN 415-6:2013 Safety of packaging machines — Part 6: Pallet wrapping machines	28.11.2013	EN 415-6:2006+A1:2009 Note 2.1	30.11.2013
CEN	EN 415-7:2006+A1:2008 Safety of packaging machines — Part 7: Group and secondary packaging machines	8.9.2009
CEN	EN 415-8:2008 Safety of packaging machines — Part 8: Strapping machines	8.9.2009
CEN	EN 415-9:2009 Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3	18.12.2009
CEN	EN 415-10:2014 Safety of packaging machines — Part 10: General Requirements	11.7.2014
CEN	EN 422:2009 Plastics and rubber machines — Blow moulding machines — Safety requirements	8.9.2009
CEN	EN 453:2014 Food processing machinery — Dough mixers — Safety and hygiene requirements	15.1.2016	EN 453:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 454:2014 Food processing machinery — Planetary mixers — Safety and hygiene requirements	15.1.2016	EN 454:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements	28.11.2013	EN 474-1:2006+A3:2013 Note 2.1	28.11.2013
	EN 474-1:2006+A4:2013/AC:2014
Warning: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC.
CEN	EN 474-2:2006+A1:2008 Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers	8.9.2009
CEN	EN 474-3:2006+A1:2009 Earth-moving machinery — Safety — Part 3: Requirements for loaders	8.9.2009
CEN	EN 474-4:2006+A2:2012 Earth-moving machinery — Safety — Part 4: Requirements for backhoe loaders	23.3.2012
CEN	EN 474-5:2006+A3:2013 Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators	28.11.2013	EN 474-5:2006+A1:2009+A2:2012 Note 2.1	31.1.2014
CEN	EN 474-6:2006+A1:2009 Earth-moving machinery — Safety — Part 6: Requirements for dumpers	8.9.2009
CEN	EN 474-7:2006+A1:2009 Earth-moving machinery — Safety — Part 7: Requirements for scrapers	8.9.2009
CEN	EN 474-8:2006+A1:2009 Earth-moving machinery — Safety — Part 8: Requirements for graders	8.9.2009
CEN	EN 474-9:2006+A1:2009 Earth-moving machinery — Safety — Part 9: Requirements for pipelayers	8.9.2009
CEN	EN 474-10:2006+A1:2009 Earth-moving machinery — Safety — Part 10: Requirements for trenchers	8.9.2009
CEN	EN 474-11:2006+A1:2008 Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors	8.9.2009
CEN	EN 474-12:2006+A1:2008 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators	8.9.2009
CEN	EN 500-1:2006+A1:2009 Mobile road construction machinery — Safety — Part 1: Common requirements	26.5.2010
CEN	EN 500-2:2006+A1:2008 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines	8.9.2009
CEN	EN 500-3:2006+A1:2008 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines	8.9.2009
CEN	EN 500-4:2011 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines	20.7.2011	EN 500-4:2006+A1:2009 Note 2.1	31.8.2011
CEN	EN 500-6:2006+A1:2008 Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers	8.9.2009
CEN	EN 528:2008 Rail dependent storage and retrieval equipment — Safety requirements	8.9.2009
CEN	EN 536:2015 Road construction machines — Mixing plants for road construction materials — Safety requirements	15.1.2016
CEN	EN 609-1:2017 Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters	This is the first publication	EN 609-1:1999+A2:2009 Note 2.1	30.6.2018
CEN	EN 609-2:1999+A1:2009 Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters	18.12.2009
CEN	EN 617:2001+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers	8.4.2011
CEN	EN 618:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors	8.4.2011
CEN	EN 619:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads	8.4.2011
CEN	EN 620:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials	8.4.2011
CEN	EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels	8.9.2009
	EN 676:2003+A2:2008/AC:2008
CEN	EN 690:2013 Agricultural machinery — Manure spreaders — Safety	11.4.2014	EN 690:1994+A1:2009 Note 2.1	30.4.2014
CEN	EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety	8.9.2009
CEN	EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presses	18.11.2011	EN 693:2001+A1:2009 Note 2.1	31.3.2012
CEN	EN 703:2004+A1:2009 Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety	18.12.2009
CEN	EN 706:1996+A1:2009 Agricultural machinery — Vine shoot tipping machines — Safety	18.12.2009
CEN	EN 707:1999+A1:2009 Agricultural machinery — Slurry tankers — Safety	18.12.2009
CEN	EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety	26.5.2010	EN 709:1997+A2:2009 Note 2.1	31.12.2010
	EN 709:1997+A4:2009/AC:2012
CEN	EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment	20.10.2010
	EN 710:1997+A1:2010/AC:2012
CEN	EN 741:2000+A1:2010 Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials	8.4.2011
CEN	EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment	18.12.2009
CEN	EN 746-2:2010 Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems	20.10.2010
CEN	EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases	8.9.2009
CEN	EN 786:1996+A2:2009 Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety	18.12.2009
CEN	EN 792-13:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools	8.9.2009
CEN	EN 809:1998+A1:2009 Pumps and pump units for liquids — Common safety requirements	18.12.2009
	EN 809:1998+A1:2009/AC:2010
CEN	EN 818-1:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance	8.9.2009
CEN	EN 818-2:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8	8.9.2009
CEN	EN 818-3:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4	8.9.2009
CEN	EN 818-4:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8	8.9.2009
CEN	EN 818-5:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4	8.9.2009
CEN	EN 818-6:2000+A1:2008 Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer	8.9.2009
CEN	EN 818-7:2002+A1:2008 Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)	8.9.2009
CEN	EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines	15.11.2012	EN 848-1:2007+A1:2009 Note 2.1	31.3.2013
CEN	EN 848-2:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines	15.11.2012	EN 848-2:2007+A1:2009 Note 2.1	31.3.2013
CEN	EN 848-3:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 3: Numerically controlled (NC) boring and routing machines	5.4.2013	EN 848-3:2007+A2:2009 Note 2.1	30.4.2013
CEN	EN 859:2007+A2:2012 Safety of woodworking machines — Hand fed surface planing machines	24.8.2012	EN 859:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 860:2007+A2:2012 Safety of woodworking machines — One side thickness planing machines	24.8.2012	EN 860:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 861:2007+A2:2012 Safety of woodworking machines — Surface planing and thicknessing machines	24.8.2012	EN 861:2007+A1:2009 Note 2.1	31.12.2012
CEN	EN 869:2006+A1:2009 Safety of machinery — Safety requirements for pressure metal diecasting units	8.9.2009
CEN	EN 908:1999+A1:2009 Agricultural and forestry machinery — Reel machines for irrigation — Safety	18.12.2009
CEN	EN 909:1998+A1:2009 Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety	18.12.2009
CEN	EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements	18.12.2009
CEN	EN 931:1997+A2:2009 Footwear manufacturing machines — Lasting machines — Safety requirements	18.12.2009
CEN	EN 940:2009+A1:2012 Safety of woodworking machines — Combined woodworking machines	5.6.2012	EN 940:2009 Note 2.1	31.8.2012
CEN	EN 957-6:2010+A1:2014 Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods	13.2.2015
CEN	EN 972:1998+A1:2010 Tannery machines — Reciprocating roller machines — Safety requirements	8.4.2011
	EN 972:1998+A1:2010/AC:2011
CEN	EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements	8.4.2011
CEN	EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery	8.4.2011
CEN	EN 1010-3:2002+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines	18.12.2009
CEN	EN 1010-4:2004+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines	18.12.2009
CEN	EN 1012-1:2010 Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors	8.4.2011
CEN	EN 1012-2:1996+A1:2009 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps	18.12.2009
CEN	EN 1012-3:2013 Compressors and vacuum pumps — Safety requirements — Part 3: Process compressors	11.4.2014
CEN	EN 1028-1:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements	8.9.2009
CEN	EN 1028-2:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements	8.9.2009
CEN	EN 1034-1:2000+A1:2010 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements	26.5.2010
CEN	EN 1034-2:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums	26.5.2010
CEN	EN 1034-3:2011 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Rereelers and winders	29.2.2012	EN 1034-3:1999+A1:2009 Note 2.1	30.6.2012
CEN	EN 1034-4:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities	26.5.2010
CEN	EN 1034-5:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters	26.5.2010
CEN	EN 1034-6:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender	26.5.2010
CEN	EN 1034-7:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests	26.5.2010
CEN	EN 1034-8:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 8: Refining plants	5.6.2012
CEN	EN 1034-13:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units	26.5.2010
CEN	EN 1034-14:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter	26.5.2010
CEN	EN 1034-16:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 16: Paper and board making machines	5.6.2012
CEN	EN 1034-17:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 17: Tissue making machines	15.11.2012
CEN	EN 1034-21:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 21: Coating machines	15.11.2012
CEN	EN 1034-22:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders	26.5.2010
CEN	EN 1034-26:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 26: Roll packaging machines	24.8.2012
CEN	EN 1034-27:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 27: Roll handling systems	15.11.2012
CEN	EN 1114-1:2011 Plastics and rubber machines — Extruders and extrusion lines — Part 1: Safety requirements for extruders	29.2.2012
CEN	EN 1114-3:2001+A1:2008 Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs	8.9.2009
CEN	EN 1175-1:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks	8.4.2011
CEN	EN 1175-2:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks	8.4.2011
CEN	EN 1175-3:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks	8.4.2011
CEN	EN 1218-1:1999+A1:2009 Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table	18.12.2009
CEN	EN 1218-2:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains	8.9.2009
CEN	EN 1218-3:2001+A1:2009 Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers	8.9.2009
CEN	EN 1218-5:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain	18.12.2009
CEN	EN 1247:2004+A1:2010 Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines	8.4.2011
CEN	EN 1248:2001+A1:2009 Foundry machinery — Safety requirements for abrasive blasting equipment	8.9.2009
CEN	EN 1265:1999+A1:2008 Safety of machinery — Noise test code for foundry machines and equipment	8.9.2009
CEN	EN 1374:2000+A1:2010 Agricultural machinery — Silos stationary unloaders for round silos — Safety	20.10.2010
CEN	EN 1398:2009 Dock levellers — Safety requirements	8.9.2009
CEN	EN 1417:2014 Plastics and rubber machines — Two-roll mills — Safety requirements	15.1.2016	EN 1417:1996+A1:2008 Note 2.1	31.12.2016
CEN	EN 1459:1998+A3:2012 Safety of industrial trucks — Self-propelled variable reach trucks	23.3.2012
CEN	EN 1459-2:2015 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing variable-reach trucks	15.1.2016
CEN	EN 1492-1:2000+A1:2008 Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use	8.9.2009
CEN	EN 1492-2:2000+A1:2008 Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use	8.9.2009
CEN	EN 1492-4:2004+A1:2008 Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes	8.9.2009
CEN	EN 1493:2010 Vehicle lifts	8.4.2011	EN 1493:1998+A1:2008 Note 2.1	4.8.2011
CEN	EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment	8.9.2009
CEN	EN 1495:1997+A2:2009 Lifting platforms — Mast climbing work platforms	18.12.2009
	EN 1495:1997+A2:2009/AC:2010
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.
CEN	EN 1501-1:2011+A1:2015 Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles	15.1.2016	EN 1501-1:2011 Note 2.1	29.2.2016
CEN	EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles	29.12.2009
CEN	EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles	8.9.2009
CEN	EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles	8.9.2009
CEN	EN 1501-5:2011 Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles	18.11.2011	EN 1501-1:1998+A2:2009 Note 2.1	29.2.2012
CEN	EN 1526:1997+A1:2008 Safety of industrial trucks — Additional requirements for automated functions on trucks	8.9.2009
CEN	EN 1539:2015 Dryers and ovens, in which flammable substances are released — Safety requirements	13.5.2016	EN 1539:2009 Note 2.1	30.4.2016
CEN	EN 1547:2001+A1:2009 Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment	8.9.2009
CEN	EN 1550:1997+A1:2008 Machine-tools safety — Safety requirements for the design and construction of work holding chucks	8.9.2009
CEN	EN 1554:2012 Conveyor belts — Drum friction testing	24.8.2012
CEN	EN 1570-1:2011+A1:2014 Safety requirements for lifting tables — Part 1: Lifting tables serving up to two fixed landings	13.5.2016	EN 1570-1:2011 Note 2.1	The date of this publication
CEN	EN 1570-2:2016 Safety requirements for lifting tables — Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s	This is the first publication
CEN	EN 1612-1:1997+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units	8.9.2009
CEN	EN 1672-2:2005+A1:2009 Food processing machinery — Basic concepts — Part 2: Hygiene requirements	8.9.2009
CEN	EN 1673:2000+A1:2009 Food processing machinery — Rotary rack ovens — Safety and hygiene requirements	26.5.2010
CEN	EN 1674:2015 Food processing machinery — Dough sheeters — Safety and hygiene requirements	15.1.2016	EN 1674:2000+A1:2009 Note 2.1	31.3.2016
CEN	EN 1677-1:2000+A1:2008 Components for slings — Safety — Part 1: Forged steel components, Grade 8	8.9.2009
CEN	EN 1677-2:2000+A1:2008 Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8	8.9.2009
CEN	EN 1677-3:2001+A1:2008 Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8	8.9.2009
CEN	EN 1677-4:2000+A1:2008 Components for slings — Safety — Part 4: Links, Grade 8	8.9.2009
CEN	EN 1677-5:2001+A1:2008 Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4	8.9.2009
CEN	EN 1677-6:2001+A1:2008 Components for slings — Safety — Part 6: Links — Grade 4	8.9.2009
CEN	EN 1678:1998+A1:2010 Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements	20.10.2010
CEN	EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines — Safety — Part 1: Compression ignition engines	20.7.2011
CEN	EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines	8.9.2009
	EN 1710:2005+A1:2008/AC:2010
CEN	EN 1755:2000+A2:2013 Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust	28.11.2013	EN 1755:2000+A1:2009 Note 2.1	28.11.2013
CEN	EN 1756-1:2001+A1:2008 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods	8.9.2009
CEN	EN 1756-2:2004+A1:2009 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers	18.12.2009
CEN	EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing	26.5.2010	EN 1777:2004+A1:2009 Note 2.1	30.9.2010
CEN	EN 1804-1:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements	26.5.2010
CEN	EN 1804-2:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Power set legs and rams	26.5.2010
CEN	EN 1804-3:2006+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems	26.5.2010
CEN	EN 1807-1:2013 Safety of woodworking machines — Band sawing machines — Part 1: Table band saws and band re-saws	28.11.2013	EN 1807:1999+A1:2009 Note 2.1	28.11.2013
CEN	EN 1807-2:2013 Safety of woodworking machines — Band sawing machines — Part 2: Log sawing machines	28.11.2013	EN 1807:1999+A1:2009 Note 2.1	28.11.2013
CEN	EN 1808:2015 Safety requirements for suspended access equipment — Design calculations, stability criteria, construction — Examinations and tests	13.5.2016	EN 1808:1999+A1:2010 Note 2.1	13.5.2016
CEN	EN 1829-1:2010 High pressure water jet machines — Safety requirements — Part 1: Machines	26.5.2010
CEN	EN 1829-2:2008 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors	8.9.2009
	EN 1829-2:2008/AC:2011
CEN	EN 1845:2007 Footwear manufacturing machines — Footwear moulding machines — Safety requirements	8.9.2009
CEN	EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance	28.11.2013	EN 1846-2:2009 Note 2.1	28.11.2013
CEN	EN 1846-3:2013 Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance	28.11.2013	EN 1846-3:2002+A1:2008 Note 2.1	31.1.2014
CEN	EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body — Safety	18.12.2009
CEN	EN 1870-3:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches	8.9.2009
CEN	EN 1870-4:2012 Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading	5.6.2012	EN 1870-4:2001+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-5:2002+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines	15.11.2012	EN 1870-5:2002+A1:2009 Note 2.1	31.3.2013
CEN	EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading	18.12.2009
CEN	EN 1870-7:2012 Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading	5.4.2013	EN 1870-7:2002+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-8:2012 Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading	5.4.2013	EN 1870-8:2001+A1:2009 Note 2.1	31.5.2013
CEN	EN 1870-9:2012 Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading	15.11.2012	EN 1870-9:2000+A1:2009 Note 2.1	31.3.2013
CEN	EN 1870-10:2013 Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines	28.11.2013	EN 1870-10:2003+A1:2009 Note 2.1	30.11.2013
CEN	EN 1870-11:2013 Safety of woodworking machines — Circular sawing machines — Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)	11.4.2014	EN 1870-11:2003+A1:2009 Note 2.1	30.4.2014
CEN	EN 1870-12:2013 Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines	11.4.2014	EN 1870-12:2003+A1:2009 Note 2.1	30.4.2014
CEN	EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines	5.6.2012	EN 1870-13:2007+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines	5.6.2012	EN 1870-14:2007+A1:2009 Note 2.1	30.9.2012
CEN	EN 1870-15:2012 Safety of woodworking machines — Circular sawing machines — Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading	5.4.2013	EN 1870-15:2004+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-16:2012 Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V cutting	5.4.2013	EN 1870-16:2005+A1:2009 Note 2.1	30.4.2013
CEN	EN 1870-17:2012+A1:2015 Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)	13.5.2016	EN 1870-17:2012 Note 2.1	The date of this publication
CEN	EN 1870-18:2013 Safety of woodworking machines — Circular sawing machines — Part 18: Dimension saws	28.11.2013	EN 1870-1:2007+A1:2009 Note 2.1	28.11.2013
CEN	EN 1870-19:2013 Safety of woodworking machines — Circular sawing machines — Part 19: Circular saw benches (with and without sliding table) and building site saws	11.4.2014	EN 1870-1:2007+A1:2009 Note 2.1	31.5.2014
CEN	EN 1889-1:2011 Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles	18.11.2011
CEN	EN 1889-2:2003+A1:2009 Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives	8.9.2009
CEN	EN 1915-1:2013 Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements	28.11.2013	EN 1915-1:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 1915-2:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods	8.9.2009
CEN	EN 1915-3:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction	8.9.2009
CEN	EN 1915-4:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction	8.9.2009
CEN	EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements	28.11.2013	EN 1953:1998+A1:2009 Note 2.1	31.3.2014
CEN	EN 1974:1998+A1:2009 Food processing machinery — Slicing machines — Safety and hygiene requirements	18.12.2009
CEN	EN ISO 2151:2008 Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004)	8.9.2009
CEN	EN ISO 2860:2008 Earth-moving machinery — Minimum access dimensions (ISO 2860:1992)	8.9.2009
CEN	EN ISO 2867:2011 Earth-moving machinery — Access systems (ISO 2867:2011)	18.11.2011	EN ISO 2867:2008 Note 2.1	31.7.2014
CEN	EN ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:2013)	28.11.2013	EN ISO 3164:2008 Note 2.1	30.11.2013
CEN	EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)	20.10.2010
	EN ISO 3266:2010/A1:2015	13.5.2016	Note 3	30.6.2016
CEN	EN ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)	8.9.2009
CEN	EN ISO 3449:2008 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005)	8.9.2009
CEN	EN ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems (ISO 3450:2011)	29.2.2012	EN ISO 3450:2008 Note 2.1	31.5.2012
CEN	EN ISO 3457:2008 Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003)	8.9.2009
CEN	EN ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008)	8.9.2009
CEN	EN ISO 3691-1:2015 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)	15.1.2016	EN ISO 3691-1:2012 Note 2.1	31.1.2016
	EN ISO 3691-1:2015/AC:2016
CEN	EN ISO 3691-5:2014 Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)	11.7.2014	EN ISO 3691-5:2009 Note 2.1	31.8.2014
	EN ISO 3691-5:2014/AC:2014
CEN	EN ISO 3691-6:2015 Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers (ISO 3691-6:2013)	13.5.2016	EN ISO 3691-6:2013 Note 2.1	13.5.2016
	EN ISO 3691-6:2015/AC:2016
CEN	EN ISO 4254-1:2015 Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2013)	13.5.2016	EN ISO 4254-1:2013 Note 2.1	13.5.2016
CEN	EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008)	26.5.2010
	EN ISO 4254-5:2009/AC:2011
CEN	EN ISO 4254-6:2009 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)	26.5.2010
	EN ISO 4254-6:2009/AC:2010
CEN	EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)	26.5.2010
	EN ISO 4254-7:2009/AC:2010
CEN	EN ISO 4254-10:2009 Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009)	26.5.2010
	EN ISO 4254-10:2009/AC:2010
CEN	EN ISO 4254-11:2010 Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010)	8.4.2011	EN 704:1999+A1:2009 Note 2.1	30.6.2011
CEN	EN ISO 4254-12:2012 Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)	24.8.2012	EN 745:1999+A1:2009 Note 2.1	31.12.2012
CEN	EN ISO 4254-14:2016 Agricultural machinery — Safety — Part 14: Bale wrappers (ISO 4254-14:2016)	9.9.2016
CEN	EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
CEN	EN ISO 5395-2:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
	EN ISO 5395-2:2013/A1:2016	This is the first publication	Note 3	30.6.2017
CEN	EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)	28.11.2013	EN 836:1997+A4:2011 Note 2.1	30.9.2014
	EN ISO 5395-3:2013/A1:2017	This is the first publication	Note 3	31.8.2017
CEN	EN ISO 5674:2009 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)	8.9.2009
CEN	EN ISO 6682:2008 Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)	8.9.2009
CEN	EN ISO 6683:2008 Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005)	8.9.2009
CEN	EN ISO 7096:2008 Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000)	8.9.2009
	EN ISO 7096:2008/AC:2009
CEN	EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008)	8.9.2009
CEN	EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008)	8.9.2009
CEN	EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008)	8.9.2009
CEN	EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)	9.9.2016	EN 12601:2010 Note 2.1	30.6.2017
CEN	EN ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001)	18.12.2009
	EN ISO 9902-1:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-1:2001/A2:2014	15.1.2016	Note 3	29.2.2016
CEN	EN ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)	18.12.2009
	EN ISO 9902-2:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-2:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001)	18.12.2009
	EN ISO 9902-3:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-3:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)	18.12.2009
	EN ISO 9902-4:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-4:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)	18.12.2009
	EN ISO 9902-5:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-5:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-6:2001 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)	18.12.2009
	EN ISO 9902-6:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-6:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)	18.12.2009
	EN ISO 9902-7:2001/A1:2009	18.12.2009	Note 3	28.12.2009
	EN ISO 9902-7:2001/A2:2014	13.2.2015	Note 3	13.2.2015
CEN	EN ISO 10218-1:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots (ISO 10218-1:2011)	18.11.2011	EN ISO 10218-1:2008 Note 2.1	1.1.2013
CEN	EN ISO 10218-2:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration (ISO 10218-2:2011)	18.11.2011
CEN	EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997)	8.9.2009
CEN	EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)	8.9.2009
CEN	EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)	8.9.2009
CEN	EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997)	8.9.2009
CEN	EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)	8.9.2009
CEN	EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997)	8.9.2009
CEN	EN ISO 10517:2009 Powered hand-held hedge trimmers — Safety (ISO 10517:2009)	18.12.2009
	EN ISO 10517:2009/A1:2013	28.11.2013	Note 3	30.9.2014
CEN	EN ISO 10821:2005 Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005)	18.12.2009
	EN ISO 10821:2005/A1:2009	18.12.2009	Note 3	28.12.2009
CEN	EN ISO 11102-1:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997)	18.12.2009
CEN	EN ISO 11102-2:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)	8.9.2009
CEN	EN ISO 11111-1:2016 Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2016)	This is the first publication		30.11.2017
CEN	EN ISO 11111-2:2005 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)	18.12.2009
	EN ISO 11111-2:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-2:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11111-3:2005 Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005)	18.12.2009
	EN ISO 11111-3:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-3:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11111-4:2005 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)	18.12.2009
	EN ISO 11111-4:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-4:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11111-5:2005 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)	18.12.2009
	EN ISO 11111-5:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-5:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11111-6:2005 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)	18.12.2009
	EN ISO 11111-6:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-6:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11111-7:2005 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)	18.12.2009
	EN ISO 11111-7:2005/A1:2009	18.12.2009	Note 3	31.1.2010
	EN ISO 11111-7:2005/A2:2016	This is the first publication	Note 3	The date of this publication
CEN	EN ISO 11145:2016 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2016)	9.9.2016	EN ISO 11145:2008 Note 2.1	30.9.2016
CEN	EN ISO 11148-1:2011 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)	24.8.2012	EN 792-1:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-2:2011 Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)	29.2.2012	EN 792-2:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2012)	5.4.2013	EN ISO 11148-3:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)	5.4.2013	EN ISO 11148-4:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-5:2011 Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills (ISO 11148-5:2011)	29.2.2012	EN 792-5:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)	5.4.2013	EN ISO 11148-6:2010 Note 2.1	30.6.2013
CEN	EN ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders (ISO 11148-7:2012)	15.11.2012	EN 792-7:2001+A1:2008 Note 2.1	28.2.2013
CEN	EN ISO 11148-8:2011 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers (ISO 11148-8:2011)	29.2.2012	EN 792-8:2001+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-9:2011 Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders (ISO 11148-9:2011)	29.2.2012	EN 792-9:2001+A1:2008 Note 2.1	1.6.2012
CEN	EN ISO 11148-10:2011 Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools (ISO 11148-10:2011)	29.2.2012	EN 792-10:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-11:2011 Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears (ISO 11148-11:2011)	29.2.2012	EN 792-11:2000+A1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)	5.4.2013	EN 792-12:2000+A1:2008 Note 2.1	30.6.2013
CEN	EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013)	28.11.2013	EN ISO 11252:2008 Note 2.1	28.2.2014
CEN	EN ISO 11553-1:2008 Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005)	8.9.2009
CEN	EN ISO 11553-2:2008 Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)	8.9.2009
CEN	EN ISO 11553-3:2013 Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)	28.11.2013
CEN	EN ISO 11680-1:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)	29.2.2012	EN ISO 11680-1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11680-2:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)	29.2.2012	EN ISO 11680-2:2008 Note 2.1	30.6.2012
CEN	EN ISO 11681-1:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2011)	29.2.2012	EN ISO 11681-1:2008 Note 2.1	30.6.2012
CEN	EN ISO 11681-2:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2011)	29.2.2012	EN ISO 11681-2:2008 Note 2.1	30.6.2012
CEN	EN ISO 11806-1:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)	29.2.2012	EN ISO 11806:2008 Note 2.1	30.6.2012
CEN	EN ISO 11806-2:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)	29.2.2012
CEN	EN ISO 11850:2011 Machinery for forestry — General safety requirements (ISO 11850:2011)	29.2.2012	EN 14861:2004+A1:2009 Note 2.1	31.5.2012
	EN ISO 11850:2011/A1:2016	9.9.2016	Note 3	31.8.2016
CEN	EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar — Safety requirements	15.11.2012	EN 12001:2003+A1:2009 Note 2.1	28.2.2013
CEN	EN 12012-1:2007+A1:2008 Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators	8.9.2009
CEN	EN 12012-3:2001+A1:2008 Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders	8.9.2009
CEN	EN 12012-4:2006+A1:2008 Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators	8.9.2009
CEN	EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements	8.9.2009
CEN	EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity	28.11.2013	EN 12016:2004+A1:2008 Note 2.1	28.2.2014
CEN	EN 12041:2014 Food processing machinery — Moulders — Safety and hygiene requirements	15.1.2016	EN 12041:2000+A1:2009 Note 2.1	29.2.2016
CEN	EN 12042:2014 Food processing machinery — Automatic dough dividers — Safety and hygiene requirements	13.2.2015	EN 12042:2005+A1:2010 Note 2.1	13.2.2015
CEN	EN 12043:2014 Food processing machinery — Intermediate provers — Safety and hygiene requirements	15.1.2016	EN 12043:2000+A1:2010 Note 2.1	29.2.2016
CEN	EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements	18.12.2009
CEN	EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions	8.9.2009
CEN	EN 12077-2:1998+A1:2008 Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices	8.9.2009
CEN	EN 12110:2014 Tunnelling machines — Air locks — Safety requirements	13.2.2015	EN 12110:2002+A1:2008 Note 2.1	13.2.2015
CEN	EN 12111:2014 Tunnelling machines — Road headers and continuous miners — Safety requirements	13.2.2015	EN 12111:2002+A1:2009 Note 2.1	13.2.2015
CEN	EN 12158-1:2000+A1:2010 Builders' hoists for goods — Part 1: Hoists with accessible platforms	8.4.2011
CEN	EN 12158-2:2000+A1:2010 Builders' hoists for goods — Part 2: Inclined hoists with non-accessible load carrying devices	8.4.2011
CEN	EN 12159:2012 Builders hoists for persons and materials with vertically guided cages	5.4.2013	EN 12159:2000+A1:2009 Note 2.1	31.5.2013
CEN	EN 12162:2001+A1:2009 Liquid pumps — Safety requirements — Procedure for hydrostatic testing	8.9.2009
CEN	EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements	18.12.2009
CEN	EN 12267:2003+A1:2010 Food processing machinery — Circular saw machines — Safety and hygiene requirements	20.10.2010
CEN	EN 12268:2014 Food processing machinery — Band saw machines — Safety and hygiene requirements	15.1.2016	EN 12268:2003+A1:2010 Note 2.1	29.2.2016
CEN	EN 12301:2000+A1:2008 Plastics and rubber machines — Calenders — Safety requirements	8.9.2009
CEN	EN 12312-1:2013 Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs	28.11.2013	EN 12312-1:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 12312-2:2014 Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles	13.2.2015	EN 12312-2:2002+A1:2009 Note 2.1	13.2.2015
CEN	EN 12312-3:2017 Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles	This is the first publication	EN 12312-3:2003+A1:2009 Note 2.1	31.7.2017
CEN	EN 12312-4:2014 Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges	11.7.2014	EN 12312-4:2003+A1:2009 Note 2.1	30.9.2014
CEN	EN 12312-5:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment	8.9.2009
CEN	EN 12312-6:2017 Aircraft ground support equipment — Specific requirements — Part 6: Deicers and de-icing/anti-icing equipment	This is the first publication	EN 12312-6:2004+A1:2009 Note 2.1	30.9.2017
CEN	EN 12312-7:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 7: Air-craft movement equipment	8.9.2009
CEN	EN 12312-8:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms	8.9.2009
CEN	EN 12312-9:2013 Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders	28.11.2013	EN 12312-9:2005+A1:2009 Note 2.1	28.11.2013
CEN	EN 12312-10:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters	8.9.2009
CEN	EN 12312-12:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment	8.9.2009
CEN	EN 12312-13:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment	8.9.2009
CEN	EN 12312-14:2014 Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles	13.2.2015	EN 12312-14:2006+A1:2009 Note 2.1	13.2.2015
CEN	EN 12312-15:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors	8.9.2009
CEN	EN 12312-16:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment	8.9.2009
CEN	EN 12312-17:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment	8.9.2009
CEN	EN 12312-18:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units	8.9.2009
CEN	EN 12312-19:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions	8.9.2009
CEN	EN 12312-20:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units	8.9.2009
CEN	EN 12321:2003+A1:2009 Underground mining machinery — Specification for the safety requirements of armoured face conveyors	8.9.2009
CEN	EN 12348:2000+A1:2009 Core drilling machines on stand — Safety	8.9.2009
CEN	EN 12355:2003+A1:2010 Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements	20.10.2010
CEN	EN 12385-1:2002+A1:2008 Steel wire ropes — Safety — Part 1: General requirements	8.9.2009
CEN	EN 12385-2:2002+A1:2008 Steel wire ropes — Safety — Part 2: Definitions, designation and classification	8.9.2009
CEN	EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance	8.9.2009
CEN	EN 12385-4:2002+A1:2008 Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications	8.9.2009
CEN	EN 12385-10:2003+A1:2008 Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications	8.9.2009
CEN	EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements	18.12.2009
CEN	EN 12409:2008+A1:2011 Plastics and rubber machines — Thermoforming machines — Safety requirements	29.2.2012	EN 12409:2008 Note 2.1	30.4.2012
CEN	EN 12417:2001+A2:2009 Machine tools — Safety — Machining centres	8.9.2009
	EN 12417:2001+A2:2009/AC:2010
CEN	EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site — Safety	8.9.2009
CEN	EN 12463:2004+A1:2011 Food processing machinery — Filling machines and auxiliary machines — Safety and hygiene requirements	20.7.2011
CEN	EN 12505:2000+A1:2009 Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements	18.12.2009
CEN	EN 12525:2000+A2:2010 Agricultural machinery — Front loaders — Safety	26.5.2010
CEN	EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements	8.9.2009
CEN	EN 12547:2014 Centrifuges — Common safety requirements	15.1.2016	EN 12547:1999+A1:2009 Note 2.1	29.2.2016
CEN	EN 12549:1999+A1:2008 Acoustics — Noise test code for fastener driving tools — Engineering method	8.9.2009
CEN	EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements	20.10.2010
CEN	EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements	20.10.2010
CEN	EN 12622:2009+A1:2013 Safety of machine tools — Hydraulic press brakes	11.4.2014	EN 12622:2009 Note 2.1	30.4.2014
CEN	EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements	8.4.2011
CEN	EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines	8.4.2011
CEN	EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines	8.4.2011
CEN	EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4: Concrete roof tile making machines	8.4.2011
CEN	EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-1: Pipe making machines manufacturing in the vertical axis	8.4.2011
CEN	EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-2: Pipe making machines manufacturing in the horizontal axis	8.4.2011
CEN	EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-3: Pipe prestressing machines	8.4.2011
CEN	EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-4: Concrete pipe coating machines	8.4.2011
CEN	EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products	8.4.2011
CEN	EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products	8.4.2011
CEN	EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)	8.4.2011
CEN	EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates — Installation and use	8.9.2009
Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC.
CEN	EN 12643:2014 Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified)	11.7.2014	EN 12643:1997+A1:2008 Note 2.1	31.8.2014
CEN	EN 12644-1:2001+A1:2008 Cranes — Information for use and testing — Part 1: Instructions	8.9.2009
CEN	EN 12644-2:2000+A1:2008 Cranes — Information for use and testing — Part 2: Marking	8.9.2009
CEN	EN 12649:2008+A1:2011 Concrete compactors and smoothing machines — Safety	18.11.2011	EN 12649:2008 Note 2.1	31.1.2012
CEN	EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements	18.12.2009
CEN	EN 12693:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors	8.9.2009
CEN	EN 12717:2001+A1:2009 Safety of machine tools — Drilling machines	8.9.2009
CEN	EN 12733:2001+A1:2009 Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety	8.9.2009
CEN	EN 12750:2013 Safety of woodworking machines — Four sided moulding machines	28.11.2013	EN 12750:2001+A1:2009 Note 2.1	28.11.2013
CEN	EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements	20.10.2010
CEN	EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing	20.10.2010
CEN	EN 12779:2015 Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety requirements	13.5.2016	EN 12779:2004+A1:2009 Note 2.1	31.5.2016
CEN	EN 12852:2001+A1:2010 Food processing machinery — Food processors and blenders — Safety and hygiene requirements	20.10.2010
CEN	EN 12853:2001+A1:2010 Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements	20.10.2010
	EN 12853:2001+A1:2010/AC:2010
CEN	EN 12854:2003+A1:2010 Food processing machinery — Beam mixers — Safety and hygiene requirements	26.5.2010
CEN	EN 12855:2003+A1:2010 Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements	20.10.2010
CEN	EN 12881-1:2014 Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests	13.2.2015	EN 12881-1:2005+A1:2008 Note 2.1	13.2.2015
CEN	EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test	8.9.2009
CEN	EN 12882:2015 Conveyor belts for general purpose use — Electrical and flammability safety requirements	15.1.2016	EN 12882:2008 Note 2.1	29.2.2016
CEN	EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 1: Common safety requirements	20.10.2010
CEN	EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids	8.9.2009
CEN	EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids	8.9.2009
CEN	EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents	8.9.2009
CEN	EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety	18.12.2009
CEN	EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods	18.12.2009
CEN	EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements	8.9.2009
CEN	EN 12984:2005+A1:2010 Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements	20.10.2010
CEN	EN 12999:2011+A1:2012 Cranes — Loader cranes	24.8.2012	EN 12999:2011 Note 2.1	31.12.2012
CEN	EN 13000:2010+A1:2014 Cranes — Mobile cranes	13.2.2015	EN 13000:2010 Note 2.1	13.2.2015
CEN	EN 13001-1:2015 Cranes — General design — Part 1: General principles and requirements	15.1.2016	EN 13001-1:2004+A1:2009 Note 2.1	29.2.2016
CEN	EN 13001-2:2014 Crane safety — General design — Part 2: Load actions	15.1.2016	EN 13001-2:2011 Note 2.1	29.2.2016
CEN	EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure	28.11.2013	EN 13001-3-1:2012 Note 2.1	31.1.2014
CEN	EN 13001-3-2:2014 Cranes — General design — Part 3-2: Limit states and proof of competence of wire ropes in reeving systems	15.1.2016
CEN	EN 13001-3-3:2014 Cranes — General design — Part 3-3: Limit states and proof of competence of wheel/rail contacts	15.1.2016
CEN	EN 13001-3-5:2016 Cranes — General design — Part 3-5: Limit states and proof of competence of forged hooks	This is the first publication
CEN	EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions	8.9.2009
CEN	EN 13019:2001+A1:2008 Machines for road surface cleaning — Safety requirements	8.9.2009
CEN	EN 13020:2015 Road surface treatment machines — Safety requirements	13.5.2016	EN 13020:2004+A1:2010 Note 2.1	31.5.2016
CEN	EN 13021:2003+A1:2008 Winter service machines — Safety requirements	8.9.2009
CEN	EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3	26.5.2010
CEN	EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory	8.9.2009
CEN	EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory	8.9.2009
CEN	EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines	18.12.2009
	EN 13035-3:2003+A1:2009/AC:2010
CEN	EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables	26.5.2010
CEN	EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking	26.5.2010
CEN	EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out	26.5.2010
CEN	EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass	26.5.2010
CEN	EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations	26.5.2010
CEN	EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines	26.5.2010
CEN	EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder	18.12.2009
CEN	EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding	18.12.2009
CEN	EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines	18.12.2009
CEN	EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses	18.12.2009
CEN	EN 13059:2002+A1:2008 Safety of industrial trucks — Test methods for measuring vibration	8.9.2009
CEN	EN 13102:2005+A1:2008 Ceramic machines — Safety — Loading and unloading of fine clay tiles	8.9.2009
CEN	EN 13112:2002+A1:2009 Tannery machines — Splitting and bandknife shearing machines — Safety requirements	26.5.2010
CEN	EN 13113:2002+A1:2010 Tannery machines — Roller coating machines — Safety requirements	8.4.2011
CEN	EN 13114:2002+A1:2009 Tannery machines — Rotating process vessels — Safety requirements	26.5.2010
CEN	EN 13118:2000+A1:2009 Agricultural machinery — Potato harvesting equipment — Safety	18.12.2009
CEN	EN 13120:2009+A1:2014 Internal blinds — Performance requirements including safety	11.7.2014	EN 13120:2009 Note 2.1	31.8.2014
	EN 13120:2009+A1:2014/AC:2015
CEN	EN 13128:2001+A2:2009 Safety of machine tools — Milling machines (including boring machines)	8.9.2009
	EN 13128:2001+A2:2009/AC:2010
CEN	EN 13135:2013 Cranes — Safety — Design — Requirements for equipment	28.11.2013	EN 13135-1:2003+A1:2010 EN 13135-2:2004+A1:2010 Note 2.1	28.11.2013
CEN	EN 13140:2000+A1:2009 Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety	18.12.2009
CEN	EN 13155:2003+A2:2009 Cranes — Safety — Non-fixed load lifting attachments	8.9.2009
CEN	EN 13157:2004+A1:2009 Cranes — Safety — Hand powered cranes	18.12.2009
CEN	EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use — Safety and performance requirements	This is the first publication	EN 13204:2004+A1:2012 Note 2.1	30.11.2017
CEN	EN 13208:2003+A1:2010 Food processing machinery — Vegetable peelers — Safety and hygiene requirements	20.10.2010
CEN	EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics	This is the first publication	EN 13241-1:2003+A1:2011 Note 2.1	30.6.2018
CEN	EN 13288:2005+A1:2009 Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements	26.5.2010
CEN	EN 13289:2001+A1:2013 Pasta processing plants — Dryers and coolers — Safety and hygiene requirements	28.11.2013
CEN	EN 13355:2004+A1:2009 Coating plants — Combined booths — Safety requirements	8.9.2009
CEN	EN 13367:2005+A1:2008 Ceramic machines — Safety — Transfer platforms and cars	8.9.2009
	EN 13367:2005+A1:2008/AC:2009
CEN	EN 13378:2001+A1:2013 Pasta processing plants — Pasta presses — Safety and hygiene requirements	28.11.2013
CEN	EN 13379:2001+A1:2013 Pasta processing plants — Spreader, stripping and cutting machine, stick return conveyor, stick magazine — Safety and hygiene requirements	28.11.2013
CEN	EN 13389:2005+A1:2009 Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements	26.5.2010
CEN	EN 13390:2002+A1:2009 Food processing machinery — Pie and tart machines — Safety and hygiene requirements	26.5.2010
CEN	EN 13411-1:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings	8.9.2009
CEN	EN 13411-2:2001+A1:2008 Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings	8.9.2009
CEN	EN 13411-3:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing	8.9.2009
CEN	EN 13411-4:2011 Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing	20.7.2011	EN 13411-4:2002+A1:2008 Note 2.1	30.9.2011
CEN	EN 13411-5:2003+A1:2008 Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips	8.9.2009
CEN	EN 13411-6:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket	8.9.2009
CEN	EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket	8.9.2009
CEN	EN 13411-8:2011 Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging	18.11.2011
CEN	EN 13414-1:2003+A2:2008 Steel wire rope slings — Safety — Part 1: Slings for general lifting service	8.9.2009
CEN	EN 13414-2:2003+A2:2008 Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer	8.9.2009
CEN	EN 13414-3:2003+A1:2008 Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings	8.9.2009
CEN	EN 13418:2013 Plastics and rubber machines — Winding machines for film or sheet — Safety requirements	28.11.2013	EN 13418:2004+A1:2008 Note 2.1	30.11.2013
CEN	EN 13448:2001+A1:2009 Agricultural and forestry machinery — Inter-row mowing units — Safety	18.12.2009
CEN	EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements	20.10.2010
CEN	EN ISO 13482:2014 Robots and robotic devices — Safety requirements for personal care robots (ISO 13482:2014)	11.7.2014
CEN	EN 13524:2003+A2:2014 Highway maintenance machines — Safety requirements	11.7.2014	EN 13524:2003+A1:2009 Note 2.1	31.8.2014
CEN	EN 13531:2001+A1:2008 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified)	8.9.2009
CEN	EN 13534:2006+A1:2010 Food processing machinery — Curing injection machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13557:2003+A2:2008 Cranes — Controls and control stations	8.9.2009
CEN	EN 13561:2015 External blinds and awnings — Performance requirements including safety	15.1.2016	EN 13561:2004+A1:2008 Note 2.1	28.2.2017
	EN 13561:2015/AC:2016
CEN	EN 13570:2005+A1:2010 Food processing machinery — Mixing machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13586:2004+A1:2008 Cranes — Access	8.9.2009
CEN	EN 13591:2005+A1:2009 Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements	26.5.2010
CEN	EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units	24.8.2012	EN 13617-1:2004+A1:2009 Note 2.1	30.11.2012
CEN	EN 13621:2004+A1:2010 Food processing machinery — Salad dryers — Safety and hygiene requirements	20.10.2010
CEN	EN 13659:2015 Shutters and external venetian blinds — Performance requirements including safety	15.1.2016	EN 13659:2004+A1:2008 Note 2.1	28.2.2017
CEN	EN 13675:2004+A1:2010 Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment	20.10.2010
CEN	EN 13683:2003+A2:2011 Garden equipment — Integrally powered shredders/chippers — Safety	20.7.2011
	EN 13683:2003+A2:2011/AC:2013
CEN	EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety	26.5.2010	EN 13684:2004+A2:2009 Note 2.1	30.6.2010
CEN	EN 13731:2007 Lifting bag systems for fire and rescue service use — Safety and performance requirements	8.9.2009
CEN	EN 13732:2013 Food processing machinery — Bulk milk coolers on farms — Requirements for performance, safety and hygiene	28.11.2013	EN 13732:2002+A2:2009 Note 2.1	31.1.2014
CEN	EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses	8.9.2009
CEN	EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes	28.11.2013
CEN	EN 13862:2001+A1:2009 Floor cutting-off machines — Safety	8.9.2009
CEN	EN 13870:2015 Food processing machinery — Portion cutting machines — Safety and hygiene requirements	15.1.2016	EN 13870:2005+A1:2010 Note 2.1	31.3.2016
CEN	EN 13871:2014 Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements	15.1.2016	EN 13871:2005+A1:2010 Note 2.1	29.2.2016
CEN	EN 13885:2005+A1:2010 Food processing machinery — Clipping machines — Safety and hygiene requirements	20.10.2010
CEN	EN 13886:2005+A1:2010 Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements	26.5.2010
CEN	EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety	8.9.2009
CEN	EN 13898:2003+A1:2009 Machine tools — Safety — Sawing machines for cold metal	8.9.2009
	EN 13898:2003+A1:2009/AC:2010
CEN	EN 13951:2012 Liquid pumps — Safety requirements — Agrifoodstuffs equipment; Design rules to ensure hygiene in use	24.8.2012	EN 13951:2003+A1:2008 Note 2.1	31.10.2012
CEN	EN 13954:2005+A1:2010 Food processing machinery — Bread slicers — Safety and hygiene requirements	26.5.2010
CEN	EN 13977:2011 Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance	20.7.2011
CEN	EN 13985:2003+A1:2009 Machine tools — Safety — Guillotine shears	8.9.2009
CEN	EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages	18.12.2009
CEN	EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety	18.12.2009	EN 14017:2005+A1:2008 Note 2.1	31.1.2010
CEN	EN 14018:2005+A1:2009 Agricultural and forestry machinery — Seed drills — Safety	18.12.2009
CEN	EN 14033-3:2009+A1:2011 Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements	29.2.2012	EN 14033-3:2009 Note 2.1	30.4.2012
CEN	EN 14043:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with combined movements — Safety and performance requirements and test methods	11.7.2014	EN 14043:2005+A1:2009 Note 2.1	31.7.2014
CEN	EN 14044:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods	11.7.2014	EN 14044:2005+A1:2009 Note 2.1	31.7.2014
CEN	EN 14070:2003+A1:2009 Safety of machine tools — Transfer and special-purpose machines	8.9.2009
	EN 14070:2003+A1:2009/AC:2010
CEN	EN 14238:2004+A1:2009 Cranes — Manually controlled load manipulating devices	18.12.2009
CEN	EN ISO 14314:2009 Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004)	18.12.2009
CEN	EN 14439:2006+A2:2009 Cranes — Safety — Tower cranes	8.9.2009
CEN	EN 14462:2005+A1:2009 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3	8.9.2009
CEN	EN 14466:2005+A1:2008 Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests	8.9.2009
CEN	EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches	18.12.2009
	EN 14492-1:2006+A1:2009/AC:2010
CEN	EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists	18.12.2009
	EN 14492-2:2006+A1:2009/AC:2010
CEN	EN 14502-2:2005+A1:2008 Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations	8.9.2009
CEN	EN 14655:2005+A1:2010 Food processing machinery — Baguette slicers — Safety and hygiene requirements	26.5.2010
CEN	EN 14656:2006+A1:2010 Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals	20.10.2010
CEN	EN 14658:2005+A1:2010 Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining	26.5.2010
CEN	EN 14673:2006+A1:2010 Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals	20.10.2010
CEN	EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel	8.9.2009
CEN	EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces	20.10.2010
CEN	EN 14710-1:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements	8.9.2009
CEN	EN 14710-2:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements	8.9.2009
CEN	EN 14753:2007 Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel	8.9.2009
CEN	EN 14886:2008 Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements	8.9.2009
CEN	EN 14910:2007+A1:2009 Garden equipment — Walk-behind combustion engine powered trimmers — Safety	8.9.2009
CEN	EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces	8.9.2009
CEN	EN 14957:2006+A1:2010 Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements	26.5.2010
CEN	EN 14958:2006+A1:2009 Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements	8.9.2009
CEN	EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements	13.5.2016	EN 14973:2006+A1:2008 Note 2.1	31.5.2016
CEN	EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998)	8.9.2009
CEN	EN 14985:2012 Cranes — Slewing jib cranes	23.3.2012
CEN	EN 15000:2008 Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters	8.9.2009
CEN	EN 15011:2011+A1:2014 Cranes — Bridge and gantry cranes	11.7.2014	EN 15011:2011 Note 2.1	31.8.2014
CEN	EN ISO 15012-4:2016 Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements (ISO 15012-4:2016)	This is the first publication
CEN	EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site — Safety	8.9.2009
CEN	EN 15056:2006+A1:2009 Cranes — Requirements for container handling spreaders	8.9.2009
CEN	EN 15059:2009+A1:2015 Snow grooming equipment — Safety requirements	15.1.2016	EN 15059:2009 Note 2.1	29.2.2016
CEN	EN 15061:2007+A1:2008 Safety of machinery — Safety requirements for strip processing line machinery and equipment	8.9.2009
CEN	EN 15067:2007 Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements	8.9.2009
CEN	EN 15093:2008 Safety of Machinery — Safety requirements for hot flat rolling mills	8.9.2009
CEN	EN 15094:2008 Safety of Machinery — Safety requirements for cold flat rolling mills	8.9.2009
CEN	EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements	8.9.2009
CEN	EN 15162:2008 Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws	8.9.2009
CEN	EN 15163:2008 Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws	8.9.2009
CEN	EN 15164:2008 Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines	8.9.2009
CEN	EN 15166:2008 Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements	8.9.2009
CEN	EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies	8.9.2009
CEN	EN 15503:2009+A2:2015 Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety	13.5.2016	EN 15503:2009+A1:2013 Note 2.1	30.6.2017
CEN	EN 15572:2015 Machines and plants for mining and tooling of natural stone — Safety — Requirements for edge finishing machines	15.1.2016
CEN	EN 15695-1:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures	26.5.2010
CEN	EN 15695-2:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures	26.5.2010
	EN 15695-2:2009/AC:2011
CEN	EN 15700:2011 Safety for conveyor belts for winter sport or leisure use	29.2.2012
CEN	EN ISO 15744:2008 Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002)	8.9.2009
CEN	EN 15746-2:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements	29.2.2012	EN 15746-2:2010 Note 2.1	30.4.2012
CEN	EN 15774:2010 Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements	8.4.2011
CEN	EN 15811:2014 Agricultural machinery — Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)	15.1.2016	EN 15811:2009 Note 2.1	29.2.2016
CEN	EN 15830:2012 Rough-terrain variable reach trucks — Visibility — Test methods and verification	24.8.2012
CEN	EN 15861:2012 Food processing machinery — Smokehouses — Safety and hygiene requirements	24.8.2012
CEN	EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools	18.11.2011
CEN	EN 15949:2012 Safety of machinery — Safety requirements for bar mills, structural steel mills and wire rod mills	5.6.2012
CEN	EN 15954-2:2013 Railway applications — Track — Trailers and associated equipment — Part 2: General safety requirements	28.11.2013
CEN	EN 15955-2:2013 Railway applications — Track — Demountable machines and associated equipment — Part 2: General safety requirements	28.11.2013
CEN	EN 15997:2011 All terrain vehicles (ATVs — Quads) — Safety requirements and test methods	29.2.2012
	EN 15997:2011/AC:2012
CEN	EN 16005:2012 Power operated pedestrian doorsets — Safety in use — Requirements and test methods	5.4.2013
	EN 16005:2012/AC:2015
CEN	EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads — Single-track two-wheel motor vehicles — Safety requirements and test methods	24.8.2012
CEN	EN ISO 16089:2015 Machine tools — Safety — Stationary grinding machines (ISO 16089:2015)	13.5.2016	EN 13218:2002+A1:2008 Note 2.1	30.6.2017
CEN	EN ISO 16119-1:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General (ISO 16119-1:2013)	28.11.2013
CEN	EN ISO 16119-2:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers (ISO 16119-2:2013)	28.11.2013
CEN	EN ISO 16119-3:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)	28.11.2013
CEN	EN ISO 16119-4:2014 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)	15.1.2016
CEN	EN 16191:2014 Tunnelling machinery — Safety requirements	13.2.2015	EN 815:1996+A2:2008 EN 12336:2005+A1:2008 Note 2.1	13.2.2015
CEN	EN 16203:2014 Safety of Industrial Trucks — Dynamic tests for verification of lateral stability — Counterbalanced Trucks	13.2.2015
CEN	EN 16228-1:2014 Drilling and foundation equipment — Safety — Part 1: Common requirements	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-2:2014 Drilling and foundation equipment — Safety — Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-3:2014 Drilling and foundation equipment — Safety — Part 3: Horizontal directional drilling equipment (HDD)	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-4:2014 Drilling and foundation equipment — Safety — Part 4: Foundation equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-5:2014 Drilling and foundation equipment — Safety — Part 5: Diaphragm walling equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-6:2014 Drilling and foundation equipment — Safety — Part 6: Jetting, grouting and injection equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16228-7:2014 Drilling and foundation equipment — Safety — Part 7: Interchangeable auxiliary equipment	13.2.2015	EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1	13.2.2015
CEN	EN 16230-1:2013+A1:2014 Leisure karts — Part 1: Safety requirements and test methods for karts	15.1.2016	EN 16230-1:2013 Note 2.1	29.2.2016
CEN	EN ISO 16230-1:2015 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements (ISO 16230-1:2015)	15.1.2016
CEN	EN ISO 16231-1:2013 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles (ISO 16231-1:2013)	28.11.2013
CEN	EN ISO 16231-2:2015 Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)	15.1.2016
CEN	EN 16246:2012 Agricultural machinery — Backhoes — Safety	5.4.2013
CEN	EN 16252:2012 Machines for compacting waste materials or recyclable fractions — Horizontal baling presses — Safety requirements	5.4.2013
CEN	EN 16307-1:2013+A1:2015 Industrial trucks — Safety requirements and verification — Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks	15.1.2016	EN 16307-1:2013 Note 2.1	29.2.2016
CEN	EN 16307-5:2013 Industrial trucks — Safety requirements and verification — Part 5: Supplementary requirements for pedestrian-propelled trucks	11.7.2014
CEN	EN 16307-6:2014 Industrial trucks — Safety requirements and verification — Part 6: Supplementary requirements for burden and personnel carriers	11.7.2014
CEN	EN 16327:2014 Fire-fighting — Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)	11.7.2014
CEN	EN 16474:2015 Plastics and rubber machines — Tyre curing machines — Safety requirements	15.1.2016
CEN	EN 16486:2014 Machines for compacting waste materials or recyclable fractions — Compactors — Safety requirements	15.1.2016
CEN	EN 16500:2014 Machines for compacting waste materials or recyclable fractions — Vertical baling presses — Safety requirements	15.1.2016
CEN	EN 16590-3:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)	13.2.2015
CEN	EN 16590-4:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)	13.2.2015
CEN	EN 16743:2016 Food processing machinery — Automatic industrial slicing machines — Safety and hygiene requirements	9.9.2016
CEN	EN 16774:2016 Safety of machinery — Safety requirements for steel converter and associated equipment	9.9.2016
CEN	EN 16851:2017 Cranes — Light crane systems	This is the first publication
CEN	EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016)	9.9.2016
CEN	EN ISO 18217:2015 Safety of woodworking machines — Edge-banding machines fed by chain(s) (ISO 18217:2015)	15.1.2016	EN 1218-4:2004+A2:2009 Note 2.1	31.3.2016
CEN	EN ISO 19432:2012 Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements (ISO 19432:2012)	15.11.2012	EN ISO 19432:2008 Note 2.1	31.1.2013
CEN	EN ISO 19932-1:2013 Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements (ISO 19932-1:2013)	28.11.2013
CEN	EN ISO 19932-2:2013 Equipment for crop protection — Knapsack sprayers — Part 2: Test methods (ISO 19932-2:2013)	28.11.2013
CEN	EN ISO 20361:2015 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2015)	9.9.2016	EN ISO 20361:2009 Note 2.1	31.12.2015
CEN	EN ISO 22867:2011 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011)	29.2.2012	EN ISO 22867:2008 Note 2.1	30.6.2012
CEN	EN ISO 22868:2011 Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2011)	20.7.2011	EN ISO 22868:2008 Note 2.1	30.9.2011
CEN	EN ISO 23125:2015 Machine tools — Safety — Turning machines (ISO 23125:2015, Corrected version 2016-03-15)	15.1.2016	EN ISO 23125:2010 Note 2.1	29.2.2016
CEN	EN ISO 28139:2009 Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009)	18.12.2009
CEN	EN ISO 28881:2013 Machine tools — Safety — Electro-discharge machines (ISO 28881:2013)	28.11.2013	EN 12957:2001+A1:2009 Note 2.1	28.2.2014
	EN ISO 28881:2013/AC:2013
CEN	EN ISO 28927-1:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009)	26.5.2010
CEN	EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)	26.5.2010
CEN	EN ISO 28927-3:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)	26.5.2010
CEN	EN ISO 28927-4:2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010)	8.4.2011
CEN	EN ISO 28927-5:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009)	26.5.2010
	EN ISO 28927-5:2009/A1:2015	15.1.2016	Note 3	31.3.2016
CEN	EN ISO 28927-6:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009)	26.5.2010
CEN	EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009)	26.5.2010
CEN	EN ISO 28927-8:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)	26.5.2010
	EN ISO 28927-8:2009/A1:2015	13.5.2016	Note 3	30.6.2016
CEN	EN ISO 28927-9:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)	26.5.2010
CEN	EN ISO 28927-10:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)	18.11.2011
CEN	EN ISO 28927-11:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers (ISO 28927-11:2011)	20.7.2011
CEN	EN ISO 28927-12:2012 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders (ISO 28927-12:2012)	5.4.2013
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.
Cenelec	EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified)	26.5.2010
	EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008	26.5.2010	Note 3	1.2.2012
	EN 60204-1:2006/AC:2010
Cenelec	EN 60204-11:2000 Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000	26.5.2010
	EN 60204-11:2000/AC:2010
Cenelec	EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008	18.12.2009
Cenelec	EN 60204-33:2011 Safety of machinery — Electrical equipment of machines — Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified)	18.11.2011
Cenelec	EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007	18.12.2009
Cenelec	EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007	18.12.2009
Cenelec	EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007	18.12.2009
Cenelec	EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2012	11.4.2014	EN 61496-1:2004 + A1:2008 Note 2.1	10.5.2015
Cenelec	EN 61800-5-2:2007 Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional IEC 61800-5-2:2007	18.12.2009
Cenelec	EN 62061:2005 Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005	26.5.2010
	EN 62061:2005/A1:2013 IEC 62061:2005/A1:2012	28.11.2013	Note 3	18.12.2015
	EN 62061:2005/AC:2010
	EN 62061:2005/A2:2015 IEC 62061:2005/A2:2015	15.1.2016	Note 3	31.7.2018
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturerÂ ¿s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.
Cenelec	EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements	15.1.2016	EN 50223:2010 Note 2.1	13.4.2018
Cenelec	EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements	26.5.2010
	EN 50348:2010/AC:2010
Cenelec	EN 50434:2014 Safety of household and similar appliances — Particular requirements for mains operated shredders and chippers	13.2.2015
Cenelec	EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors	11.4.2014
Cenelec	EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers	11.4.2014
Cenelec	EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines	11.4.2014
Cenelec	EN 50580:2012 Safety of hand-held electric motor operated tools — Particular requirements for spray guns	5.6.2012
	EN 50580:2012/A1:2013	28.11.2013	Note 3	22.7.2016
Cenelec	EN 50636-2-91:2014 Household and similar electrical appliances — Safety — Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers IEC 60335-2-91:2008 (Modified)	13.2.2015
Cenelec	EN 50636-2-92:2014 Household and similar electrical appliances — Safety — Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators IEC 60335-2-92:2002 (Modified)	13.2.2015
Cenelec	EN 50636-2-94:2014 Household and similar electrical appliances — Safety — Part 2-94: Particular requirements for scissors type grass shears IEC 60335-2-94:2008 (Modified)	13.2.2015
Cenelec	EN 50636-2-100:2014 Household and similar electrical appliances — Safety — Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums IEC 60335-2-100:2002 (Modified)	13.2.2015
Cenelec	EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers IEC 60335-2-107:2012 (Modified)	15.1.2016
Cenelec	EN 60204-31:2013 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013	11.4.2014
Cenelec	EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2010 (Modified)	5.6.2012	EN 60335-1:2002 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + A1:2004 Note 2.1	21.11.2014
	EN 60335-1:2012/AC:2014
	EN 60335-1:2012/A11:2014	15.1.2016	Note 3	29.2.2016
Cenelec	EN 60335-2-8:2015 Household and similar electrical appliances — Safety — Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2012 (Modified)	13.5.2016
	EN 60335-2-8:2015/A1:2016 IEC 60335-2-8:2012/A1:2015	9.9.2016	Note 3	28.12.2018
Cenelec	EN 60335-2-23:2003 Household and similar electrical appliances — Safety — Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003	15.1.2016
	EN 60335-2-23:2003/A2:2015 IEC 60335-2-23:2003/A2:2012 (Modified)	15.1.2016	Note 3	29.9.2017
Cenelec	EN 60335-2-36:2002 Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002	5.4.2013
	EN 60335-2-36:2002/AC:2007
	EN 60335-2-36:2002/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-37:2002 Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002	5.4.2013
	EN 60335-2-37:2002/AC:2007
	EN 60335-2-37:2002/A11:2012	5.4.2013	Note 3	13.2.2015
	EN 60335-2-37:2002/A12:2016	9.9.2016	Note 3	25.1.2019
Cenelec	EN 60335-2-40:2003 Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified)	28.11.2013
	EN 60335-2-40:2003/AC:2010
	EN 60335-2-40:2003/AC:2006
	EN 60335-2-40:2003/A11:2004	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A12:2005	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified)	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified)	28.11.2013	Note 3	28.11.2013
	EN 60335-2-40:2003/A13:2012	28.11.2013	Note 3	11.7.2014
	EN 60335-2-40:2003/A13:2012/AC:2013
Cenelec	EN 60335-2-42:2003 Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002	5.4.2013
	EN 60335-2-42:2003/AC:2007
	EN 60335-2-42:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-47:2003 Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002	5.4.2013
	EN 60335-2-47:2003/AC:2007
	EN 60335-2-47:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-48:2003 Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002	5.4.2013
	EN 60335-2-48:2003/AC:2007
	EN 60335-2-48:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-49:2003 Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002	5.4.2013
	EN 60335-2-49:2003/AC:2007
	EN 60335-2-49:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-65:2003 Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002	5.4.2013
	EN 60335-2-65:2003/A11:2012	5.4.2013	Note 3	13.2.2015
Cenelec	EN 60335-2-67:2012 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Modified)	15.11.2012	EN 60335-2-67:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-68:2012 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Modified)	15.11.2012	EN 60335-2-68:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-69:2012 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use IEC 60335-2-69:2012 (Modified)	15.11.2012	EN 60335-2-69:2009 Note 2.1	28.3.2015
Cenelec	EN 60335-2-72:2012 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use IEC 60335-2-72:2012 (Modified)	15.11.2012	EN 60335-2-72:2009 Note 2.1	3.5.2015
Cenelec	EN 60335-2-77:2010 Safety of household and similar appliances — Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified)	8.4.2011
Cenelec	EN 60335-2-79:2012 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2012 (Modified)	15.11.2012	EN 60335-2-79:2009 Note 2.1	3.4.2015
Cenelec	EN 60335-2-89:2010 Household and similar electrical appliances — Safety — Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor IEC 60335-2-89:2010	9.9.2016
	EN 60335-2-89:2010/A1:2016 IEC 60335-2-89:2010/A1:2012 (Modified)	9.9.2016	Note 3	12.2.2019
Cenelec	EN 60335-2-95:2015 Household and similar electrical appliances — Safety — Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use IEC 60335-2-95:2011 (Modified)	15.1.2016
	EN 60335-2-95:2015/A1:2015 IEC 60335-2-95:2011/A1:2015	15.1.2016	Note 3	15.6.2018
Cenelec	EN 60335-2-97:2006 Household and similar electrical appliances — Safety — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified)	15.1.2016
	EN 60335-2-97:2006/A12:2015	15.1.2016	Note 3	29.9.2017
Cenelec	EN 60335-2-102:2016 Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) IEC 60335-2-102:2004/A1:2008 (Modified) + A1:2008 (Modified) IEC 60335-2-102:2004/A2:2012 (Modified)	9.9.2016
Cenelec	EN 60335-2-103:2015 Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows IEC 60335-2-103:2006 (Modified) + A1:2010 (Modified)	15.1.2016
Cenelec	EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing — Part 1: General requirements IEC 60519-1:2015	15.1.2016
Cenelec	EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008	20.10.2010
Cenelec	EN 60745-2-3:2011 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified)	18.11.2011
	EN 60745-2-3:2011/A2:2013 IEC 60745-2-3:2006/A2:2012 (Modified)	28.11.2013	Note 3	25.2.2016
	EN 60745-2-3:2011/A11:2014	13.2.2015	Note 3	21.4.2016
	EN 60745-2-3:2011/A12:2014	15.1.2016	Note 3	17.11.2017
	EN 60745-2-3:2011/A13:2015	13.5.2016	Note 3	28.9.2018
Cenelec	EN 60745-2-6:2010 Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006	20.10.2010
Cenelec	EN 60745-2-12:2009 Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-13:2009 Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified)	18.12.2009
	EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009	20.7.2011	Note 3	1.12.2013
Cenelec	EN 60745-2-15:2009 Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified)	18.12.2009
	EN 60745-2-15:2009/A1:2010 IEC 60745-2-15:2006/A1:2009	28.11.2013	Note 3	28.11.2013
Cenelec	EN 60745-2-16:2010 Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified)	8.4.2011
Cenelec	EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified)	8.4.2011
Cenelec	EN 60745-2-18:2009 Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-19:2009 Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified)	18.12.2009
	EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010	8.4.2011	Note 3	1.6.2013
Cenelec	EN 60745-2-20:2009 Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008	18.12.2009
Cenelec	EN 60745-2-21:2009 Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified)	18.12.2009
	EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008	20.7.2011	Note 3	1.12.2013
Cenelec	EN 60745-2-22:2011 Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified)	18.11.2011
	EN 60745-2-22:2011/A11:2013	28.11.2013	Note 3	17.12.2015
Cenelec	EN 60745-2-23:2013 Hand-held motor-operated electric tools — Safety — Part 2-23: Particular requirements for die grinders and small rotary tools IEC 60745-2-23:2012 (Modified)	28.11.2013
Cenelec	EN 60947-5-3:2013 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDDB) IEC 60947-5-3:2013	11.4.2014
Cenelec	EN 60947-5-5:1997 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997	28.11.2013
	EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005	28.11.2013	Note 3	28.11.2013
	EN 60947-5-5:1997/A11:2013	28.11.2013	Note 3	3.12.2015
	EN 60947-5-5:1997/A2:2017 IEC 60947-5-5:1997/A2:2016	This is the first publication	Note 3	24.2.2020
Cenelec	EN 61029-2-3:2011 Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001	18.11.2011
Cenelec	EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified)	18.11.2011
Cenelec	EN 61029-2-5:2011 Safety of transportable motor-operated electric tools — Part 2-5: Particular requirements for band saws IEC 61029-2-5:1993 (Modified) + A1:2001 (Modified)	15.1.2016
	EN 61029-2-5:2011/A11:2015	15.1.2016	Note 3	1.12.2016
Cenelec	EN 61029-2-8:2010 Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999	20.10.2010
Cenelec	EN 61029-2-11:2012 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified)	5.4.2013	EN 61029-2-11:2009 Note 2.1	3.9.2015
	EN 61029-2-11:2012/A11:2013	28.11.2013	Note 3	12.8.2016
Cenelec	EN 61029-2-12:2011 Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified)	18.11.2011
Cenelec	EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 1: General requirements IEC 62841-1:2014 (Modified)	15.1.2016	EN 60335-1:2012 + A11:2014 EN 60745-1:2009 + A11:2010 EN 61029-1:2009 + A11:2010 Note 2.3	23.12.2019
	EN 62841-1:2015/AC:2015
Cenelec	EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) IEC 62841-2-2:2014	15.1.2016	EN 60745-2-2:2010 Note 2.1	21.8.2019
	EN 62841-2-2:2014/AC:2015
Cenelec	EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) IEC 62841-2-4:2014	15.1.2016	EN 60745-2-4:2009 + A11:2011 Note 2.1	21.8.2019
	EN 62841-2-4:2014/AC:2015
Cenelec	EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) IEC 62841-2-5:2014	15.1.2016	EN 60745-2-5:2010 Note 2.1	21.8.2019
Cenelec	EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-8: Particular requirements for hand-held shears and nibblers IEC 62841-2-8:2016 (Modified)	This is the first publication	EN 60745-2-8:2009 Note 2.1	2.5.2020
Cenelec	EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-9: Particular requirements for hand-held tappers and threaders IEC 62841-2-9:2015 (Modified)	15.1.2016	EN 60745-2-9:2009 Note 2.1	21.8.2019
	EN 62841-2-9:2015/AC:2016-10
Cenelec	EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-11: Particular requirements for hand-held reciprocating saws IEC 62841-2-11:2015 (Modified)	9.9.2016	EN 60745-2-11:2010 Note 2.1	23.12.2019
Cenelec	EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-14: Particular requirements for hand-held planers IEC 62841-2-14:2015 (Modified)	13.5.2016	EN 60745-2-14:2009 + A2:2010 Note 2.1	31.8.2019
Cenelec	EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) IEC 62841-3-1:2014	15.1.2016	EN 61029-2-1:2012 Note 2.1	21.8.2019
	EN 62841-3-1:2014/AC:2015
Cenelec	EN 62841-3-6:2014 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) IEC 62841-3-6:2014	15.1.2016	EN 61029-2-6:2010 Note 2.1	21.8.2019
	EN 62841-3-6:2014/AC:2015
Cenelec	EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws IEC 62841-3-9:2014 (Modified)	13.5.2016	EN 61029-2-9:2012 + A11:2013 Note 2.1	15.11.2019
	EN 62841-3-9:2015/AC:2016-09
Cenelec	EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines IEC 62841-3-10:2015 (Modified)	13.5.2016	EN 61029-2-10:2010 + A11:2013 Note 2.1	19.10.2019
	EN 62841-3-10:2015/AC:2016-07

Note 1:

Note 2.1:

Note 2.2:

Note 2.3:

Note 3:

NOTE:

—

—	Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

—	This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

—	More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-s...

(¹) ESO: European standardisation organisation:

—	CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

—	Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

—	ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu)

(²) OJ C 338, 27.9.2014, p. 31.

Language English

Read more about Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017

Harmonized standard list for ATEX 2014/34/UE - 9.6.2017

Submitted by root on Wed, 02/07/2018 - 14:12

9.6.2017

Official Journal of the European Union

C 183/1

Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2017/C 183/01)

ESO	Reference and title of the standard (and reference document)	First publication OJ	Reference of superseded standard	Date of cessation of presumption of conformity of superseded standard
CEN	EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements	8.4.2016
CEN	EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery	8.4.2016
CEN	EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology	8.4.2016
CEN	EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining	8.4.2016
CEN	EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines	8.4.2016
	EN 1710:2005+A1:2008/AC:2010
CEN	EN 1755:2015 Industrial Trucks — Safety requirements and verification — Supplementary requirements for operation in potentially explosive atmospheres	8.4.2016
CEN	EN 1834-1:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 1: Group II engines for use in flammable gas and vapour atmospheres	8.4.2016
CEN	EN 1834-2:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust	8.4.2016
CEN	EN 1834-3:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 3: Group II engines for use in flammable dust atmospheres	8.4.2016
CEN	EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours	This is the first publication	EN 1839:2012 EN 14756:2006 Note 2.1	11.1.2018
CEN	EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements	8.4.2016
CEN	EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements	8.4.2016
CEN	EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements	8.4.2016
CEN	EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing	8.4.2016
CEN	EN 13012:2012 Petrol filling stations — Construction and performance of automatic nozzles for use on fuel dispensers	8.4.2016
CEN	EN 13160-1:2003 Leak detection systems — Part 1: General principles	8.4.2016
CEN	EN 13237:2012 Potentially explosive atmospheres — Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres	8.4.2016
CEN	EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres — Part 2: Protection by flow restricting enclosure ‘fr’	8.4.2016
CEN	EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres — Part 3: Protection by flameproof enclosure ‘d’	8.4.2016
CEN	EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels — Part 1: Overfill prevention devices with closure device	12.8.2016	EN 13616:2004 Note 2.1	11.7.2017
CEN	EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units	8.4.2016
CEN	EN 13617-2:2012 Petrol filling stations — Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers	8.4.2016
CEN	EN 13617-3:2012 Petrol filling stations — Part 3: Safety requirements for construction and performance of shear valves	8.4.2016
CEN	EN 13617-4:2012 Petrol filling stations — Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers	8.4.2016
CEN	EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles — Nozzle, test requirements and dimensions	8.4.2016
CEN	EN 13821:2002 Potentially explosive atmospheres — Explosion prevention and protection — Determination of minimum ignition energy of dust/air mixtures	8.4.2016
CEN	EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes	8.4.2016
CEN	EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 1: Determination of the maximum explosion pressure pmax of dust clouds	8.4.2016
CEN	EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds	8.4.2016
CEN	EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 3: Determination of the lower explosion limit LEL of dust clouds	8.4.2016
CEN	EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 4: Determination of the limiting oxygen concentration LOC of dust clouds	8.4.2016
CEN	EN 14373:2005 Explosion suppression systems	8.4.2016
CEN	EN 14460:2006 Explosion resistant equipment	8.4.2016
CEN	EN 14491:2012 Dust explosion venting protective systems	8.4.2016
CEN	EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches	8.4.2016
	EN 14492-1:2006+A1:2009/AC:2010
CEN	EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists	8.4.2016
	EN 14492-2:2006+A1:2009/AC:2010
CEN	EN 14522:2005 Determination of the auto ignition temperature of gases and vapours	8.4.2016
CEN	EN 14591-1:2004 Explosion prevention and protection in underground mines — Protective systems — Part 1: 2-bar explosion proof ventilation structure	8.4.2016
	EN 14591-1:2004/AC:2006
CEN	EN 14591-2:2007 Explosion prevention and protection in underground mines — Protective systems — Part 2: Passive water trough barriers	8.4.2016
	EN 14591-2:2007/AC:2008
CEN	EN 14591-4:2007 Explosion prevention and protection in underground mines — Protective systems — Part 4: Automatic extinguishing systems for road headers	8.4.2016
	EN 14591-4:2007/AC:2008
CEN	EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel	8.4.2016
CEN	EN 14678-1:2013 LPG equipment and accessories — Construction and performance of LPG equipment for automotive filling stations — Part 1: Dispensers	8.4.2016
CEN	EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces	8.4.2016
CEN	EN 14797:2006 Explosion venting devices	8.4.2016
CEN	EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements	8.4.2016
CEN	EN 14983:2007 Explosion prevention and protection in underground mines — Equipment and protective systems for firedamp drainage	8.4.2016
CEN	EN 14986:2017 Design of fans working in potentially explosive atmospheres	This is the first publication	EN 14986:2007 Note 2.1	31.1.2020
CEN	EN 14994:2007 Gas explosion venting protective systems	8.4.2016
CEN	EN 15089:2009 Explosion isolation systems	8.4.2016
CEN	EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations	8.4.2016
CEN	EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres	8.4.2016
CEN	EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres	8.4.2016
CEN	EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies	8.4.2016
CEN	EN 15794:2009 Determination of explosion points of flammable liquids	8.4.2016
CEN	EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours	8.4.2016
CEN	EN 16009:2011 Flameless explosion venting devices	8.4.2016
CEN	EN 16020:2011 Explosion diverters	8.4.2016
CEN	EN 16447:2014 Explosion isolation flap valves	8.4.2016
CEN	EN ISO 16852:2016 Flame arresters — Performance requirements, test methods and limits for use (ISO 16852:2016)	This is the first publication	EN ISO 16852:2010 Note 2.1	31.5.2017
CEN	EN ISO 80079-36:2016 Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements (ISO 80079-36:2016)	12.8.2016	EN 13463-1:2009 Note 2.1	31.10.2019
CEN	EN ISO 80079-37:2016 Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety ‘‘c’’, control of ignition sources ‘‘b’’, liquid immersion ‘‘k’’ (ISO 80079-37:2016)	12.8.2016	EN 13463-5:2011 EN 13463-6:2005 EN 13463-8:2003 Note 2.1	31.10.2019
Cenelec	EN 50050-1:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 1: Hand-held spraying equipment for ignitable liquid coating materials	8.4.2016	EN 50050:2006 Note 2.1	14.10.2016
Cenelec	EN 50050-2:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 2: Hand-held spraying equipment for ignitable coating powder	8.4.2016	EN 50050:2006 Note 2.1	14.10.2016
Cenelec	EN 50050-3:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 3: Hand-held spraying equipment for ignitable flock	8.4.2016	EN 50050:2006 Note 2.1	14.10.2016
Cenelec	EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen — Performance requirements and test methods	8.4.2016
Cenelec	EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material — Safety requirements	8.4.2016
Cenelec	EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders — Safety requirements	8.4.2016
	EN 50177:2009/A1:2012	8.4.2016	Note 3
Cenelec	EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements	8.4.2016	EN 50223:2010 Note 2.1	13.4.2018
Cenelec	EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen — Requirements and tests for apparatus using software and/or digital technologies	8.4.2016
Cenelec	EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust — Part 2-1: Test methods — Methods for determining the minimum ignition temperatures of dust	8.4.2016
	EN 50281-2-1:1998/AC:1999
Cenelec	EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust	8.4.2016
Cenelec	EN 50381:2004 Transportable ventilated rooms with or without an internal source of release	8.4.2016
	EN 50381:2004/AC:2005
Cenelec	EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks	8.4.2016
Cenelec	EN 60079-0:2012 Explosive atmospheres — Part 0: Equipment — General requirements IEC 60079-0:2011 (Modified) + IS1:2013	8.4.2016
	EN 60079-0:2012/A11:2013	8.4.2016	Note 3	7.10.2016
Cenelec	EN 60079-1:2014 Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures ‘d’ IEC 60079-1:2014	8.4.2016	EN 60079-1:2007 Note 2.1	1.8.2017
Cenelec	EN 60079-2:2014 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosure ‘p’ IEC 60079-2:2014	8.4.2016	EN 60079-2:2007 EN 61241-4:2006 Note 2.1	25.8.2017
	EN 60079-2:2014/AC:2015
Cenelec	EN 60079-5:2015 Explosive atmospheres — Part 5: Equipment protection by powder filling ‘q’ IEC 60079-5:2015	8.4.2016	EN 60079-5:2007 Note 2.1	24.3.2018
Cenelec	EN 60079-6:2015 Explosive atmospheres — Part 6: Equipment protection by liquid immersion ‘o’ IEC 60079-6:2015	8.4.2016	EN 60079-6:2007 Note 2.1	27.3.2018
Cenelec	EN 60079-7:2015 Explosive atmospheres — Part 7: Equipment protection by increased safety ‘e’ IEC 60079-7:2015	8.4.2016	EN 60079-7:2007 Note 2.1	31.7.2018
Cenelec	EN 60079-11:2012 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety ‘i’ IEC 600 IEC 60079-11:2011	8.4.2016	EN 60079-27:2008 Note 2.1
Cenelec	EN 60079-15:2010 Explosive atmospheres — Part 15: Equipment protection by type of protection ‘n’ IEC 60079-15:2010	8.4.2016
Cenelec	EN 60079-18:2015 Explosive atmospheres — Part 18: Equipment protection by encapsulation ‘m’ IEC 60079-18:2014	8.4.2016	EN 60079-18:2009 Note 2.1	16.1.2018
Cenelec	EN 60079-20-1:2010 Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data IEC 60079 IEC 60079-20-1:2010	8.4.2016
Cenelec	EN 60079-25:2010 Explosive atmospheres — Part 25: Intrinsically safe electrical systems IEC 60079-25:2010	8.4.2016
	EN 60079-25:2010/AC:2013
Cenelec	EN 60079-26:2015 Explosive atmospheres — Part 26: Equipment with Equipment Protection Level (EPL) Ga IEC 60079-26:2014	8.4.2016	EN 60079-26:2007 Note 2.1	2.12.2017
Cenelec	EN 60079-28:2015 Explosive atmospheres — Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-28:2015	8.4.2016	EN 60079-28:2007 Note 2.1	1.7.2018
Cenelec	EN 60079-29-1:2016 Explosive atmospheres — Part 29-1: Gas detectors — Performance requirements of detectors for flammable gases IEC 60079-29-1:2016 (Modified)	This is the first publication	EN 60079-29-1:2007 Note 2.1	23.12.2019
Cenelec	EN 60079-29-4:2010 Explosive atmospheres — Part 29-4: Gas detectors — Performance requirements of open path detectors for flammable gases IEC 60079-29-4:2009 (Modified)	8.4.2016
Cenelec	EN 60079-30-1:2007 Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements IEC 60079-30-1:2007	8.4.2016
Cenelec	EN 60079-31:2014 Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure ‘t’ IEC 60079-31:2013	8.4.2016	EN 60079-31:2009 Note 2.1	1.1.2017
Cenelec	EN 60079-35-1:2011 Explosive atmospheres — Part 35-1: Caplights for use in mines susceptible to firedamp — General requirements — Construction and testing in relation to the risk of explosion IEC 60079-35-1:2011	8.4.2016
	EN 60079-35-1:2011/AC:2011
Cenelec	EN ISO/IEC 80079-34:2011 Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)	8.4.2016

Note 1:

Note 2.1:

Note 2.2:

Note 2.3:

Note 3:

NOTE:

—

—	Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

—	This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

—	More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-s...

ESO: European standardisation organisation:

—	CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu)

—	Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu)

—	ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716, (http://www.etsi.eu)

(²) OJ C 338, 27.9.2014, p. 314.

Language English

Read more about Harmonized standard list for ATEX 2014/34/UE - 9.6.2017

Machinery directive 2006/42/CE - Functional safety & ATEX directive 2014/34/EU

Secondary menu

Guide to application of the machinery directive 2006/42/CE - July 2017 - citations-recitals

PREAMBLE TO THE MACHINERY DIRECTIVE - THE CITATIONS

PREAMBLE TO THE MACHINERY DIRECTIVE - THE RECITALS

Guide to application of machinery directive - § 388 - ANNEX IV machinery and mandatory certification

Guide to application of machinery directive - § 387 - ANNEX III CE marking

Guide to application of the machinery directive 2006/42/CE - July 2017

Introduction to the Edition 2.1 – July 2017 (Update of the 2^nd Edition)

Table of contents

Publication of harmonised standards for machinery directive 2006/42/EC - 9.3.2018

§ 3 The recitals - application guide 2nd edition of the ATEX 2014/34/EU directive

§ 3 The recitals

§ 2 The legal basis of the ATEX Directive : application guide 2nd edition of the ATEX 2014/34/EU directive

§ 2 The legal basis of the ATEX Directive

§ 1 The citations - application guide 2nd edition of the ATEX 2014/34/EU directive

§ 1 The citations

Harmonized standard list - machinery directive 2006/42/EC - 9.6.2017

Harmonized standard list for ATEX 2014/34/UE - 9.6.2017

Pages

Search

Secondary menu

You are here

PREAMBLE TO THE MACHINERY DIRECTIVE - THE CITATIONS

PREAMBLE TO THE MACHINERY DIRECTIVE - THE RECITALS

Introduction to the Edition 2.1 – July 2017 (Update of the 2nd Edition)

Table of contents

§ 3 The recitals

§ 2 The legal basis of the ATEX Directive

§ 1 The citations

Pages

Introduction to the Edition 2.1 – July 2017 (Update of the 2^nd Edition)