harmonized standards for machinery - OJ C 2015/C 054/01 of 13/02/2015

13.2.2015   

EN

Official Journal of the European Union

C 54/1


Commission communication in the framework of the implementation of Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

(2015/C 054/01)

ESO

Reference and title of the standard

(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Standards developed by CEN

A-type standards

A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity.

CEN

EN ISO 12100:2010

Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010)

8.4.2011

EN ISO 12100-1:2003

EN ISO 12100-2:2003

EN ISO 14121-1:2007

Date expired

(30.11.2013)

B-type standards

B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.

CEN

EN 349:1993+A1:2008

Safety of machinery — Minimum gaps to avoid crushing of parts of the human body

8.9.2009

 

 

CEN

EN 547-1:1996+A1:2008

Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

8.9.2009

 

 

CEN

EN 547-2:1996+A1:2008

Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings

8.9.2009

 

 

CEN

EN 547-3:1996+A1:2008

Safety of machinery — Human body measurements — Part 3: Anthropometric data

8.9.2009

 

 

CEN

EN 574:1996+A1:2008

Safety of machinery — Two-hand control devices — Functional aspects — Principles for design

8.9.2009

 

 

CEN

EN 614-1:2006+A1:2009

Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles

8.9.2009

 

 

CEN

EN 614-2:2000+A1:2008

Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks

8.9.2009

 

 

CEN

EN 626-1:1994+A1:2008

Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers

8.9.2009

 

 

CEN

EN 626-2:1996+A1:2008

Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures

8.9.2009

 

 

CEN

EN 842:1996+A1:2008

Safety of machinery — Visual danger signals — General requirements, design and testing

8.9.2009

 

 

CEN

EN 894-1:1997+A1:2008

Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators

8.9.2009

 

 

CEN

EN 894-2:1997+A1:2008

Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays

8.9.2009

 

 

CEN

EN 894-3:2000+A1:2008

Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators

8.9.2009

 

 

CEN

EN 894-4:2010

Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators

20.10.2010

 

 

CEN

EN 953:1997+A1:2009

Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards

8.9.2009

 

 

CEN

EN 981:1996+A1:2008

Safety of machinery — System of auditory and visual danger and information signals

8.9.2009

 

 

CEN

EN 1005-1:2001+A1:2008

Safety of machinery — Human physical performance — Part 1: Terms and definitions

8.9.2009

 

 

CEN

EN 1005-2:2003+A1:2008

Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery

8.9.2009

 

 

CEN

EN 1005-3:2002+A1:2008

Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation

8.9.2009

 

 

CEN

EN 1005-4:2005+A1:2008

Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery

8.9.2009

 

 

CEN

EN 1032:2003+A1:2008

Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value

8.9.2009

 

 

CEN

EN 1037:1995+A1:2008

Safety of machinery — Prevention of unexpected start-up

8.9.2009

 

 

CEN

EN 1093-1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods

8.9.2009

 

 

CEN

EN 1093-2:2006+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

8.9.2009

 

 

CEN

EN 1093-3:2006+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant

8.9.2009

 

 

CEN

EN 1093-4:1996+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method

8.9.2009

 

 

CEN

EN 1093-6:1998+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet

8.9.2009

 

 

CEN

EN 1093-7:1998+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet

8.9.2009

 

 

CEN

EN 1093-8:1998+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method

8.9.2009

 

 

CEN

EN 1093-9:1998+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method

8.9.2009

 

 

CEN

EN 1093-11:2001+A1:2008

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index

8.9.2009

 

 

CEN

EN 1127-1:2011

Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology

18.11.2011

EN 1127-1:2007

Date expired

(31.7.2014)

CEN

EN 1299:1997+A1:2008

Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation

8.9.2009

 

 

CEN

EN 1837:1999+A1:2009

Safety of machinery — Integral lighting of machines

18.12.2009

 

 

CEN

EN ISO 3741:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010)

8.4.2011

EN ISO 3741:2009

Date expired

(30.4.2011)

CEN

EN ISO 3743-1:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

8.4.2011

EN ISO 3743-1:2009

Date expired

(30.4.2011)

CEN

EN ISO 3743-2:2009

Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

18.12.2009

 

 

CEN

EN ISO 3744:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

8.4.2011

EN ISO 3744:2009

Date expired

(30.4.2011)

CEN

EN ISO 3745:2012

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

5.6.2012

EN ISO 3745:2009

Date expired

(30.9.2012)

CEN

EN ISO 3746:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

8.4.2011

EN ISO 3746:2009

Date expired

(30.6.2011)

CEN

EN ISO 3747:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

8.4.2011

EN ISO 3747:2009

Date expired

(30.6.2011)

CEN

EN ISO 4413:2010

Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010)

8.4.2011

EN 982:1996+A1:2008

Date expired

(30.11.2011)

CEN

EN ISO 4414:2010

Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010)

8.4.2011

EN 983:1996+A1:2008

Date expired

(30.11.2011)

CEN

EN ISO 4871:2009

Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

18.12.2009

 

 

CEN

EN ISO 5136:2009

Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003)

18.12.2009

 

 

CEN

EN ISO 7235:2009

Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

18.12.2009

 

 

CEN

EN ISO 7731:2008

Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003)

8.9.2009

 

 

CEN

EN ISO 9614-1:2009

Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993)

18.12.2009

 

 

CEN

EN ISO 9614-3:2009

Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

18.12.2009

 

 

CEN

EN ISO 11145:2008

Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2006)

8.9.2009

 

 

CEN

EN ISO 11161:2007

Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007)

26.5.2010

 

 

 

EN ISO 11161:2007/A1:2010

26.5.2010

 

Date expired

(30.9.2010)

CEN

EN ISO 11200:2014

Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)

13.2.2015

EN ISO 11200:2009

13.2.2015

CEN

EN ISO 11201:2010

Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

20.10.2010

EN ISO 11201:2009

Date expired

(30.11.2010)

CEN

EN ISO 11202:2010

Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

20.10.2010

EN ISO 11202:2009

Date expired

(30.11.2010)

CEN

EN ISO 11203:2009

Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

18.12.2009

 

 

CEN

EN ISO 11204:2010

Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

20.10.2010

EN ISO 11204:2009

Date expired

(30.11.2010)

CEN

EN ISO 11205:2009

Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

18.12.2009

 

 

CEN

EN ISO 11546-1:2009

Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

18.12.2009

 

 

CEN

EN ISO 11546-2:2009

Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

18.12.2009

 

 

CEN

EN ISO 11554:2008

Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

8.9.2009

 

 

CEN

EN ISO 11688-1:2009

Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995)

18.12.2009

 

 

CEN

EN ISO 11691:2009

Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995)

18.12.2009

 

 

CEN

EN ISO 11957:2009

Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996)

18.12.2009

 

 

CEN

EN 12198-1:2000+A1:2008

Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles

8.9.2009

 

 

CEN

EN 12198-2:2002+A1:2008

Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure

8.9.2009

 

 

CEN

EN 12198-3:2002+A1:2008

Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening

8.9.2009

 

 

CEN

EN 12254:2010

Screens for laser working places — Safety requirements and testing

26.5.2010

EN 12254:1998+A2:2008

Date expired

(30.9.2010)

 

EN 12254:2010/AC:2011

 

 

 

CEN

EN 12786:2013

Safety of machinery — Requirements for the drafting of the vibration clauses of safety standards

28.11.2013

 

 

CEN

EN 13478:2001+A1:2008

Safety of machinery — Fire prevention and protection

8.9.2009

 

 

CEN

EN 13490:2001+A1:2008

Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration

8.9.2009

 

 

CEN

EN ISO 13732-1:2008

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)

8.9.2009

 

 

CEN

EN ISO 13732-3:2008

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005)

8.9.2009

 

 

CEN

EN ISO 13753:2008

Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

8.9.2009

 

 

CEN

EN ISO 13849-1:2008

Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006)

8.9.2009

EN ISO 13849-1:2006

EN 954-1:1996

Date expired

(31.12.2011)

 

EN ISO 13849-1:2008/AC:2009

 

 

 

CEN

EN ISO 13849-2:2012

Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2012)

5.4.2013

EN ISO 13849-2:2008

Date expired

(30.4.2013)

CEN

EN ISO 13850:2008

Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006)

8.9.2009

 

 

CEN

EN ISO 13855:2010

Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)

20.10.2010

EN 999:1998+A1:2008

Date expired

(30.11.2010)

CEN

EN ISO 13856-1:2013

Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)

28.11.2013

EN 1760-1:1997+A1:2009

Date expired

(28.11.2013)

CEN

EN ISO 13856-2:2013

Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)

28.11.2013

EN 1760-2:2001+A1:2009

Date expired

(28.11.2013)

CEN

EN ISO 13856-3:2013

Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)

28.11.2013

EN 1760-3:2004+A1:2009

Date expired

(31.1.2014)

CEN

EN ISO 13857:2008

Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

8.9.2009

 

 

CEN

EN ISO 14119:2013

Safety of machinery — Interlocking devices associated with guards — Principles for design and selection (ISO 14119:2013)

11.4.2014

EN 1088:1995+A2:2008

30.4.2015

CEN

EN ISO 14122-1:2001

Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)

20.10.2010

 

 

 

EN ISO 14122-1:2001/A1:2010

20.10.2010

 

Date expired

(31.10.2010)

CEN

EN ISO 14122-2:2001

Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2001)

20.10.2010

 

 

 

EN ISO 14122-2:2001/A1:2010

20.10.2010

 

Date expired

(31.10.2010)

CEN

EN ISO 14122-3:2001

Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)

20.10.2010

 

 

 

EN ISO 14122-3:2001/A1:2010

20.10.2010

 

Date expired

(31.10.2010)

CEN

EN ISO 14122-4:2004

Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2004)

8.4.2011

 

 

 

EN ISO 14122-4:2004/A1:2010

8.4.2011

 

Date expired

(8.4.2011)

CEN

EN ISO 14159:2008

Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002)

8.9.2009

 

 

CEN

EN ISO 14738:2008

Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

8.9.2009

 

 

CEN

EN ISO 15536-1:2008

Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005)

8.9.2009

 

 

CEN

EN 15967:2011

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

18.11.2011

 

 

CEN

EN ISO 20643:2008

Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005)

8.9.2009

 

 

 

EN ISO 20643:2008/A1:2012

15.11.2012

 

Date expired

(31.1.2013)

CEN

EN 30326-1:1994

Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:1992)

8.9.2009

 

 

 

EN 30326-1:1994/A1:2007

8.9.2009

 

Date expired

(28.12.2009)

 

EN 30326-1:1994/A2:2011

29.2.2012

 

Date expired

(30.6.2012)

C-type standards

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.

CEN

EN 81-3:2000+A1:2008

Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts

8.9.2009

 

 

 

EN 81-3:2000+A1:2008/AC:2009

 

 

 

CEN

EN 81-31:2010

Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts

20.10.2010

 

 

CEN

EN 81-40:2008

Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

8.9.2009

 

 

CEN

EN 81-41:2010

Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

8.4.2011

 

 

CEN

EN 81-43:2009

Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes

8.9.2009

 

 

CEN

EN 115-1:2008+A1:2010

Safety of escalators and moving walks — Part 1: Construction and installation

26.5.2010

EN 115-1:2008

Date expired

(30.9.2010)

CEN

EN 201:2009

Plastics and rubber machines — Injection moulding machines — Safety requirements

18.12.2009

 

 

CEN

EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

18.11.2011

EN 267:2009

Date expired

(29.2.2012)

CEN

EN 280:2013

Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests

28.11.2013

EN 280:2001+A2:2009

Date expired

(31.1.2015)

CEN

EN 289:2014

Plastics and rubber machines — Compression moulding machines and transfer moulding machines — Safety requirements

13.2.2015

EN 289:2004+A1:2008

13.2.2015

CEN

EN 303-5:2012

Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking

24.8.2012

 

 

CEN

EN 378-2:2008+A2:2012

Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation

24.8.2012

EN 378-2:2008+A1:2009

Date expired

(30.11.2012)

CEN

EN 415-1:2000+A1:2009

Packaging machines safety — Part 1: Terminology and classification of packaging machines and associated equipment

8.9.2009

 

 

CEN

EN 415-3:1999+A1:2009

Safety of packaging machines — Part 3: Form, fill and seal machines

18.12.2009

 

 

CEN

EN 415-5:2006+A1:2009

Safety of packaging machines — Part 5: Wrapping machines

18.12.2009

 

 

CEN

EN 415-6:2013

Safety of packaging machines — Part 6: Pallet wrapping machines

28.11.2013

EN 415-6:2006+A1:2009

Date expired

(30.11.2013)

CEN

EN 415-7:2006+A1:2008

Safety of packaging machines — Part 7: Group and secondary packaging machines

8.9.2009

 

 

CEN

EN 415-8:2008

Safety of packaging machines — Part 8: Strapping machines

8.9.2009

 

 

CEN

EN 415-9:2009

Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

18.12.2009

 

 

CEN

EN 415-10:2014

Safety of packaging machines — Part 10: General Requirements

11.7.2014

 

 

CEN

EN 422:2009

Plastics and rubber machines — Blow moulding machines — Safety requirements

8.9.2009

 

 

CEN

EN 453:2000+A1:2009

Food processing machinery — Dough mixers — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 454:2000+A1:2009

Food processing machinery — Planetary mixers — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 474-1:2006+A4:2013

Earth-moving machinery — Safety — Part 1: General requirements

28.11.2013

EN 474-1:2006+A3:2013

Date expired

(28.11.2013)

 

EN 474-1:2006+A4:2013/AC:2014

 

 

 

CEN

EN 474-2:2006+A1:2008

Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers

8.9.2009

 

 

CEN

EN 474-3:2006+A1:2009

Earth-moving machinery — Safety — Part 3: Requirements for loaders

8.9.2009

 

 

CEN

EN 474-4:2006+A2:2012

Earth-moving machinery — Safety — Part 4: Requirements for backhoe loaders

23.3.2012

 

 

CEN

EN 474-5:2006+A3:2013

Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators

28.11.2013

EN 474-5:2006+A1:2009+A2:2012

Date expired

(31.1.2014)

CEN

EN 474-6:2006+A1:2009

Earth-moving machinery — Safety — Part 6: Requirements for dumpers

8.9.2009

 

 

CEN

EN 474-7:2006+A1:2009

Earth-moving machinery — Safety — Part 7: Requirements for scrapers

8.9.2009

 

 

CEN

EN 474-8:2006+A1:2009

Earth-moving machinery — Safety — Part 8: Requirements for graders

8.9.2009

 

 

CEN

EN 474-9:2006+A1:2009

Earth-moving machinery — Safety — Part 9: Requirements for pipelayers

8.9.2009

 

 

CEN

EN 474-10:2006+A1:2009

Earth-moving machinery — Safety — Part 10: Requirements for trenchers

8.9.2009

 

 

CEN

EN 474-11:2006+A1:2008

Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors

8.9.2009

 

 

CEN

EN 474-12:2006+A1:2008

Earth-moving machinery — Safety — Part 12: Requirements for cable excavators

8.9.2009

 

 

CEN

EN 500-1:2006+A1:2009

Mobile road construction machinery — Safety — Part 1: Common requirements

26.5.2010

 

 

CEN

EN 500-2:2006+A1:2008

Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines

8.9.2009

 

 

CEN

EN 500-3:2006+A1:2008

Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines

8.9.2009

 

 

CEN

EN 500-4:2011

Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines

20.7.2011

EN 500-4:2006+A1:2009

Date expired

(31.8.2011)

CEN

EN 500-6:2006+A1:2008

Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers

8.9.2009

 

 

CEN

EN 528:2008

Rail dependent storage and retrieval equipment — Safety requirements

8.9.2009

 

 

CEN

EN 609-1:1999+A2:2009

Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters

18.12.2009

 

 

CEN

EN 609-2:1999+A1:2009

Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters

18.12.2009

 

 

CEN

EN 617:2001+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

8.4.2011

 

 

CEN

EN 618:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

8.4.2011

 

 

CEN

EN 619:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads

8.4.2011

 

 

CEN

EN 620:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials

8.4.2011

 

 

CEN

EN 676:2003+A2:2008

Automatic forced draught burners for gaseous fuels

8.9.2009

 

 

 

EN 676:2003+A2:2008/AC:2008

 

 

 

CEN

EN 690:2013

Agricultural machinery — Manure spreaders — Safety

11.4.2014

EN 690:1994+A1:2009

Date expired

(30.4.2014)

CEN

EN 692:2005+A1:2009

Machine tools — Mechanical presses — Safety

8.9.2009

 

 

CEN

EN 693:2001+A2:2011

Machine tools — Safety — Hydraulic presses

18.11.2011

EN 693:2001+A1:2009

Date expired

(31.3.2012)

CEN

EN 703:2004+A1:2009

Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety

18.12.2009

 

 

CEN

EN 706:1996+A1:2009

Agricultural machinery — Vine shoot tipping machines — Safety

18.12.2009

 

 

CEN

EN 707:1999+A1:2009

Agricultural machinery — Slurry tankers — Safety

18.12.2009

 

 

CEN

EN 709:1997+A4:2009

Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety

26.5.2010

EN 709:1997+A2:2009

Date expired

(31.12.2010)

 

EN 709:1997+A4:2009/AC:2012

 

 

 

CEN

EN 710:1997+A1:2010

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

20.10.2010

 

 

 

EN 710:1997+A1:2010/AC:2012

 

 

 

CEN

EN 741:2000+A1:2010

Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials

8.4.2011

 

 

CEN

EN 746-1:1997+A1:2009

Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment

18.12.2009

 

 

CEN

EN 746-2:2010

Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems

20.10.2010

 

 

CEN

EN 746-3:1997+A1:2009

Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases

8.9.2009

 

 

CEN

EN 786:1996+A2:2009

Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety

18.12.2009

 

 

CEN

EN 792-13:2000+A1:2008

Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools

8.9.2009

 

 

CEN

EN 809:1998+A1:2009

Pumps and pump units for liquids — Common safety requirements

18.12.2009

 

 

 

EN 809:1998+A1:2009/AC:2010

 

 

 

CEN

EN 818-1:1996+A1:2008

Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance

8.9.2009

 

 

CEN

EN 818-2:1996+A1:2008

Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8

8.9.2009

 

 

CEN

EN 818-3:1999+A1:2008

Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4

8.9.2009

 

 

CEN

EN 818-4:1996+A1:2008

Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8

8.9.2009

 

 

CEN

EN 818-5:1999+A1:2008

Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4

8.9.2009

 

 

CEN

EN 818-6:2000+A1:2008

Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer

8.9.2009

 

 

CEN

EN 818-7:2002+A1:2008

Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

8.9.2009

 

 

CEN

EN 848-1:2007+A2:2012

Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines

15.11.2012

EN 848-1:2007+A1:2009

Date expired

(31.3.2013)

CEN

EN 848-2:2007+A2:2012

Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines

15.11.2012

EN 848-2:2007+A1:2009

Date expired

(31.3.2013)

CEN

EN 848-3:2012

Safety of woodworking machines — One side moulding machines with rotating tool — Part 3: Numerically controlled (NC) boring and routing machines

5.4.2013

EN 848-3:2007+A2:2009

Date expired

(30.4.2013)

CEN

EN 859:2007+A2:2012

Safety of woodworking machines — Hand fed surface planing machines

24.8.2012

EN 859:2007+A1:2009

Date expired

(31.12.2012)

CEN

EN 860:2007+A2:2012

Safety of woodworking machines — One side thickness planing machines

24.8.2012

EN 860:2007+A1:2009

Date expired

(31.12.2012)

CEN

EN 861:2007+A2:2012

Safety of woodworking machines — Surface planing and thicknessing machines

24.8.2012

EN 861:2007+A1:2009

Date expired

(31.12.2012)

CEN

EN 869:2006+A1:2009

Safety of machinery — Safety requirements for pressure metal diecasting units

8.9.2009

 

 

CEN

EN 908:1999+A1:2009

Agricultural and forestry machinery — Reel machines for irrigation — Safety

18.12.2009

 

 

CEN

EN 909:1998+A1:2009

Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety

18.12.2009

 

 

CEN

EN 930:1997+A2:2009

Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements

18.12.2009

 

 

CEN

EN 931:1997+A2:2009

Footwear manufacturing machines — Lasting machines — Safety requirements

18.12.2009

 

 

CEN

EN 940:2009+A1:2012

Safety of woodworking machines — Combined woodworking machines

5.6.2012

EN 940:2009

Date expired

(31.8.2012)

CEN

EN 957-6:2010+A1:2014

Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods

13.2.2015

 

 

CEN

EN 972:1998+A1:2010

Tannery machines — Reciprocating roller machines — Safety requirements

8.4.2011

 

 

 

EN 972:1998+A1:2010/AC:2011

 

 

 

CEN

EN 1010-1:2004+A1:2010

Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements

8.4.2011

 

 

CEN

EN 1010-2:2006+A1:2010

Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery

8.4.2011

 

 

CEN

EN 1010-3:2002+A1:2009

Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines

18.12.2009

 

 

CEN

EN 1010-4:2004+A1:2009

Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines

18.12.2009

 

 

CEN

EN 1012-1:2010

Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors

8.4.2011

 

 

CEN

EN 1012-2:1996+A1:2009

Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps

18.12.2009

 

 

CEN

EN 1012-3:2013

Compressors and vacuum pumps — Safety requirements — Part 3: Process compressors

11.4.2014

 

 

CEN

EN 1028-1:2002+A1:2008

Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements

8.9.2009

 

 

CEN

EN 1028-2:2002+A1:2008

Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements

8.9.2009

 

 

CEN

EN 1034-1:2000+A1:2010

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements

26.5.2010

 

 

CEN

EN 1034-2:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums

26.5.2010

 

 

CEN

EN 1034-3:2011

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Rereelers and winders

29.2.2012

EN 1034-3:1999+A1:2009

Date expired

(30.6.2012)

CEN

EN 1034-4:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities

26.5.2010

 

 

CEN

EN 1034-5:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters

26.5.2010

 

 

CEN

EN 1034-6:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender

26.5.2010

 

 

CEN

EN 1034-7:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests

26.5.2010

 

 

CEN

EN 1034-8:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 8: Refining plants

5.6.2012

 

 

CEN

EN 1034-13:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units

26.5.2010

 

 

CEN

EN 1034-14:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter

26.5.2010

 

 

CEN

EN 1034-16:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 16: Paper and board making machines

5.6.2012

 

 

CEN

EN 1034-17:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 17: Tissue making machines

15.11.2012

 

 

CEN

EN 1034-21:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 21: Coating machines

15.11.2012

 

 

CEN

EN 1034-22:2005+A1:2009

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders

26.5.2010

 

 

CEN

EN 1034-26:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 26: Roll packaging machines

24.8.2012

 

 

CEN

EN 1034-27:2012

Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 27: Roll handling systems

15.11.2012

 

 

CEN

EN 1114-1:2011

Plastics and rubber machines — Extruders and extrusion lines — Part 1: Safety requirements for extruders

29.2.2012

 

 

CEN

EN 1114-3:2001+A1:2008

Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs

8.9.2009

 

 

CEN

EN 1127-2:2014

Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining

13.2.2015

EN 1127-2:2002+A1:2008

13.2.2015

CEN

EN 1175-1:1998+A1:2010

Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks

8.4.2011

 

 

CEN

EN 1175-2:1998+A1:2010

Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks

8.4.2011

 

 

CEN

EN 1175-3:1998+A1:2010

Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

8.4.2011

 

 

CEN

EN 1218-1:1999+A1:2009

Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table

18.12.2009

 

 

CEN

EN 1218-2:2004+A1:2009

Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains

8.9.2009

 

 

CEN

EN 1218-3:2001+A1:2009

Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

8.9.2009

 

 

CEN

EN 1218-4:2004+A2:2009

Safety of woodworking machines — Tenoning machines — Part 4: Edge banding machines fed by chain(s)

8.9.2009

 

 

CEN

EN 1218-5:2004+A1:2009

Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain

18.12.2009

 

 

CEN

EN 1247:2004+A1:2010

Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines

8.4.2011

 

 

CEN

EN 1248:2001+A1:2009

Foundry machinery — Safety requirements for abrasive blasting equipment

8.9.2009

 

 

CEN

EN 1265:1999+A1:2008

Safety of machinery — Noise test code for foundry machines and equipment

8.9.2009

 

 

CEN

EN 1374:2000+A1:2010

Agricultural machinery — Silos stationary unloaders for round silos — Safety

20.10.2010

 

 

CEN

EN 1398:2009

Dock levellers — Safety requirements

8.9.2009

 

 

CEN

EN 1417:1996+A1:2008

Plastics and rubber machines — Two roll mills — Safety requirements

8.9.2009

 

 

 

EN 1417:1996+A1:2008/AC:2009

 

 

 

CEN

EN 1459:1998+A3:2012

Safety of industrial trucks — Self-propelled variable reach trucks

23.3.2012

 

 

CEN

EN 1492-1:2000+A1:2008

Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

8.9.2009

 

 

CEN

EN 1492-2:2000+A1:2008

Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use

8.9.2009

 

 

CEN

EN 1492-4:2004+A1:2008

Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes

8.9.2009

 

 

CEN

EN 1493:2010

Vehicle lifts

8.4.2011

EN 1493:1998+A1:2008

Date expired

(4.8.2011)

CEN

EN 1494:2000+A1:2008

Mobile or movable jacks and associated lifting equipment

8.9.2009

 

 

CEN

EN 1495:1997+A2:2009

Lifting platforms — Mast climbing work platforms

18.12.2009

 

 

 

EN 1495:1997+A2:2009/AC:2010

 

 

 

Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.

CEN

EN 1501-1:2011

Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles

18.11.2011

EN 1501-1:1998+A2:2009

Date expired

(29.2.2012)

CEN

EN 1501-2:2005+A1:2009

Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles

29.12.2009

 

 

CEN

EN 1501-3:2008

Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles

8.9.2009

 

 

CEN

EN 1501-4:2007

Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles

8.9.2009

 

 

CEN

EN 1501-5:2011

Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles

18.11.2011

EN 1501-1:1998+A2:2009

Date expired

(29.2.2012)

CEN

EN 1526:1997+A1:2008

Safety of industrial trucks — Additional requirements for automated functions on trucks

8.9.2009

 

 

CEN

EN 1539:2009

Dryers and ovens, in which flammable substances are released — Safety requirements

26.5.2010

 

 

CEN

EN 1547:2001+A1:2009

Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

8.9.2009

 

 

CEN

EN 1550:1997+A1:2008

Machine-tools safety — Safety requirements for the design and construction of work holding chucks

8.9.2009

 

 

CEN

EN 1554:2012

Conveyor belts — Drum friction testing

24.8.2012

 

 

CEN

EN 1570-1:2011

Safety requirements for lifting tables — Part 1: Lifting tables serving up to two fixed landings

29.2.2012

EN 1570:1998+A2:2009

Date expired

(30.4.2012)

CEN

EN 1612-1:1997+A1:2008

Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units

8.9.2009

 

 

CEN

EN 1672-2:2005+A1:2009

Food processing machinery — Basic concepts — Part 2: Hygiene requirements

8.9.2009

 

 

CEN

EN 1673:2000+A1:2009

Food processing machinery — Rotary rack ovens — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 1674:2000+A1:2009

Food processing machinery — Dough and pastry brakes — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 1677-1:2000+A1:2008

Components for slings — Safety — Part 1: Forged steel components, Grade 8

8.9.2009

 

 

CEN

EN 1677-2:2000+A1:2008

Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8

8.9.2009

 

 

CEN

EN 1677-3:2001+A1:2008

Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8

8.9.2009

 

 

CEN

EN 1677-4:2000+A1:2008

Components for slings — Safety — Part 4: Links, Grade 8

8.9.2009

 

 

CEN

EN 1677-5:2001+A1:2008

Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4

8.9.2009

 

 

CEN

EN 1677-6:2001+A1:2008

Components for slings — Safety — Part 6: Links — Grade 4

8.9.2009

 

 

CEN

EN 1678:1998+A1:2010

Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 1679-1:1998+A1:2011

Reciprocating internal combustion engines — Safety — Part 1: Compression ignition engines

20.7.2011

 

 

CEN

EN 1710:2005+A1:2008

Equipment and components intended for use in potentially explosive atmospheres in underground mines

8.9.2009

 

 

 

EN 1710:2005+A1:2008/AC:2010

 

 

 

CEN

EN 1755:2000+A2:2013

Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust

28.11.2013

EN 1755:2000+A1:2009

Date expired

(28.11.2013)

CEN

EN 1756-1:2001+A1:2008

Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods

8.9.2009

 

 

CEN

EN 1756-2:2004+A1:2009

Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers

18.12.2009

 

 

CEN

EN 1777:2010

Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing

26.5.2010

EN 1777:2004+A1:2009

Date expired

(30.9.2010)

CEN

EN 1804-1:2001+A1:2010

Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements

26.5.2010

 

 

CEN

EN 1804-2:2001+A1:2010

Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Power set legs and rams

26.5.2010

 

 

CEN

EN 1804-3:2006+A1:2010

Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems

26.5.2010

 

 

CEN

EN 1807-1:2013

Safety of woodworking machines — Band sawing machines — Part 1: Table band saws and band re-saws

28.11.2013

EN 1807:1999+A1:2009

Date expired

(28.11.2013)

CEN

EN 1807-2:2013

Safety of woodworking machines — Band sawing machines — Part 2: Log sawing machines

28.11.2013

EN 1807:1999+A1:2009

Date expired

(28.11.2013)

CEN

EN 1808:1999+A1:2010

Safety requirements on Suspended Access Equipment — Design calculations, stability criteria, construction — Tests

20.10.2010

 

 

CEN

EN 1829-1:2010

High pressure water jet machines — Safety requirements — Part 1: Machines

26.5.2010

 

 

CEN

EN 1829-2:2008

High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors

8.9.2009

 

 

 

EN 1829-2:2008/AC:2011

 

 

 

CEN

EN 1845:2007

Footwear manufacturing machines — Footwear moulding machines — Safety requirements

8.9.2009

 

 

CEN

EN 1846-2:2009+A1:2013

Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance

28.11.2013

EN 1846-2:2009

Date expired

(28.11.2013)

CEN

EN 1846-3:2013

Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance

28.11.2013

EN 1846-3:2002+A1:2008

Date expired

(31.1.2014)

CEN

EN 1853:1999+A1:2009

Agricultural machinery — Trailers with tipping body — Safety

18.12.2009

 

 

CEN

EN 1870-3:2001+A1:2009

Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

8.9.2009

 

 

CEN

EN 1870-4:2012

Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading

5.6.2012

EN 1870-4:2001+A1:2009

Date expired

(30.9.2012)

CEN

EN 1870-5:2002+A2:2012

Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

15.11.2012

EN 1870-5:2002+A1:2009

Date expired

(31.3.2013)

CEN

EN 1870-6:2002+A1:2009

Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

18.12.2009

 

 

CEN

EN 1870-7:2012

Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

5.4.2013

EN 1870-7:2002+A1:2009

Date expired

(30.4.2013)

CEN

EN 1870-8:2012

Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

5.4.2013

EN 1870-8:2001+A1:2009

Date expired

(31.5.2013)

CEN

EN 1870-9:2012

Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

15.11.2012

EN 1870-9:2000+A1:2009

Date expired

(31.3.2013)

CEN

EN 1870-10:2013

Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

28.11.2013

EN 1870-10:2003+A1:2009

Date expired

(30.11.2013)

CEN

EN 1870-11:2013

Safety of woodworking machines — Circular sawing machines — Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

11.4.2014

EN 1870-11:2003+A1:2009

Date expired

(30.4.2014)

CEN

EN 1870-12:2013

Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines

11.4.2014

EN 1870-12:2003+A1:2009

Date expired

(30.4.2014)

CEN

EN 1870-13:2007+A2:2012

Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines

5.6.2012

EN 1870-13:2007+A1:2009

Date expired

(30.9.2012)

CEN

EN 1870-14:2007+A2:2012

Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines

5.6.2012

EN 1870-14:2007+A1:2009

Date expired

(30.9.2012)

CEN

EN 1870-15:2012

Safety of woodworking machines — Circular sawing machines — Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

5.4.2013

EN 1870-15:2004+A1:2009

Date expired

(30.4.2013)

CEN

EN 1870-16:2012

Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V cutting

5.4.2013

EN 1870-16:2005+A1:2009

Date expired

(30.4.2013)

CEN

EN 1870-17:2012

Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

13.2.2015

EN 1870-17:2007+A2:2009

13.2.2015

Warning: with regards to the choice of guards of the saw blade, this publication does not concern paragraphs 3 of clauses 5.3.6.1 of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.4.2 of Annex I to Directive 2006/42/EC.

CEN

EN 1870-18:2013

Safety of woodworking machines — Circular sawing machines — Part 18: Dimension saws

28.11.2013

EN 1870-1:2007+A1:2009

Date expired

(28.11.2013)

CEN

EN 1870-19:2013

Safety of woodworking machines — Circular sawing machines — Part 19: Circular saw benches (with and without sliding table) and building site saws

11.4.2014

EN 1870-1:2007+A1:2009

Date expired

(31.5.2014)

CEN

EN 1889-1:2011

Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles

18.11.2011

 

 

CEN

EN 1889-2:2003+A1:2009

Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives

8.9.2009

 

 

CEN

EN 1915-1:2013

Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements

28.11.2013

EN 1915-1:2001+A1:2009

Date expired

(28.11.2013)

CEN

EN 1915-2:2001+A1:2009

Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods

8.9.2009

 

 

CEN

EN 1915-3:2004+A1:2009

Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction

8.9.2009

 

 

CEN

EN 1915-4:2004+A1:2009

Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction

8.9.2009

 

 

CEN

EN 1953:2013

Atomising and spraying equipment for coating materials — Safety requirements

28.11.2013

EN 1953:1998+A1:2009

Date expired

(31.3.2014)

CEN

EN 1974:1998+A1:2009

Food processing machinery — Slicing machines — Safety and hygiene requirements

18.12.2009

 

 

CEN

EN ISO 2151:2008

Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004)

8.9.2009

 

 

CEN

EN ISO 2860:2008

Earth-moving machinery — Minimum access dimensions (ISO 2860:1992)

8.9.2009

 

 

CEN

EN ISO 2867:2011

Earth-moving machinery — Access systems (ISO 2867:2011)

18.11.2011

EN ISO 2867:2008

Date expired

(31.7.2014)

CEN

EN ISO 3164:2013

Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:2013)

28.11.2013

EN ISO 3164:2008

Date expired

(30.11.2013)

CEN

EN ISO 3266:2010

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

20.10.2010

 

 

CEN

EN ISO 3411:2007

Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

8.9.2009

 

 

CEN

EN ISO 3449:2008

Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005)

8.9.2009

 

 

CEN

EN ISO 3450:2011

Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems (ISO 3450:2011)

29.2.2012

EN ISO 3450:2008

Date expired

(31.5.2012)

CEN

EN ISO 3457:2008

Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003)

8.9.2009

 

 

CEN

EN ISO 3471:2008

Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008)

8.9.2009

 

 

CEN

EN ISO 3691-5:2014

Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)

11.7.2014

EN ISO 3691-5:2009

Date expired

(31.8.2014)

CEN

EN ISO 3691-6:2013

Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers (ISO 3691-6:2013)

11.7.2014

 

 

 

EN ISO 3691-6:2013/AC:2014

 

 

 

CEN

EN ISO 4254-1:2013

Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2013)

28.11.2013

EN ISO 4254-1:2009

Date expired

(30.11.2013)

CEN

EN ISO 4254-5:2009

Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

26.5.2010

 

 

 

EN ISO 4254-5:2009/AC:2011

 

 

 

CEN

EN ISO 4254-6:2009

Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

26.5.2010

 

 

 

EN ISO 4254-6:2009/AC:2010

 

 

 

CEN

EN ISO 4254-7:2009

Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

26.5.2010

 

 

 

EN ISO 4254-7:2009/AC:2010

 

 

 

CEN

EN ISO 4254-10:2009

Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

26.5.2010

 

 

 

EN ISO 4254-10:2009/AC:2010

 

 

 

CEN

EN ISO 4254-11:2010

Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010)

8.4.2011

EN 704:1999+A1:2009

Date expired

(30.6.2011)

CEN

EN ISO 4254-12:2012

Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)

24.8.2012

EN 745:1999+A1:2009

Date expired

(31.12.2012)

CEN

EN ISO 5395-1:2013

Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)

28.11.2013

EN 836:1997+A4:2011

Date expired

(30.9.2014)

CEN

EN ISO 5395-2:2013

Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)

28.11.2013

EN 836:1997+A4:2011

Date expired

(30.9.2014)

CEN

EN ISO 5395-3:2013

Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)

28.11.2013

EN 836:1997+A4:2011

Date expired

(30.9.2014)

CEN

EN ISO 5674:2009

Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

8.9.2009

 

 

CEN

EN ISO 6682:2008

Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

8.9.2009

 

 

CEN

EN ISO 6683:2008

Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005)

8.9.2009

 

 

CEN

EN ISO 7096:2008

Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000)

8.9.2009

 

 

 

EN ISO 7096:2008/AC:2009

 

 

 

CEN

EN ISO 8230-1:2008

Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008)

8.9.2009

 

 

CEN

EN ISO 8230-2:2008

Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

8.9.2009

 

 

CEN

EN ISO 8230-3:2008

Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008)

8.9.2009

 

 

CEN

EN ISO 9902-1:2001

Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001)

18.12.2009

 

 

 

EN ISO 9902-1:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

CEN

EN ISO 9902-2:2001

Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

18.12.2009

 

 

 

EN ISO 9902-2:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-2:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 9902-3:2001

Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001)

18.12.2009

 

 

 

EN ISO 9902-3:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-3:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 9902-4:2001

Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

18.12.2009

 

 

 

EN ISO 9902-4:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-4:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 9902-5:2001

Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

18.12.2009

 

 

 

EN ISO 9902-5:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-5:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 9902-6:2001

Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)

18.12.2009

 

 

 

EN ISO 9902-6:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-6:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 9902-7:2001

Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

18.12.2009

 

 

 

EN ISO 9902-7:2001/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

 

EN ISO 9902-7:2001/A2:2014

13.2.2015

 

13.2.2015

CEN

EN ISO 10218-1:2011

Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots (ISO 10218-1:2011)

18.11.2011

EN ISO 10218-1:2008

Date expired

(1.1.2013)

CEN

EN ISO 10218-2:2011

Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration (ISO 10218-2:2011)

18.11.2011

 

 

CEN

EN ISO 10472-1:2008

Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997)

8.9.2009

 

 

CEN

EN ISO 10472-2:2008

Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

8.9.2009

 

 

CEN

EN ISO 10472-3:2008

Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

8.9.2009

 

 

CEN

EN ISO 10472-4:2008

Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997)

8.9.2009

 

 

CEN

EN ISO 10472-5:2008

Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

8.9.2009

 

 

CEN

EN ISO 10472-6:2008

Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997)

8.9.2009

 

 

CEN

EN ISO 10517:2009

Powered hand-held hedge trimmers — Safety (ISO 10517:2009)

18.12.2009

 

 

 

EN ISO 10517:2009/A1:2013

28.11.2013

 

Date expired

(30.9.2014)

CEN

EN ISO 10821:2005

Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005)

18.12.2009

 

 

 

EN ISO 10821:2005/A1:2009

18.12.2009

 

Date expired

(28.12.2009)

CEN

EN ISO 11102-1:2009

Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997)

18.12.2009

 

 

CEN

EN ISO 11102-2:2009

Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)

8.9.2009

 

 

CEN

EN ISO 11111-1:2009

Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2009)

18.12.2009

 

 

CEN

EN ISO 11111-2:2005

Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

18.12.2009

 

 

 

EN ISO 11111-2:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11111-3:2005

Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005)

18.12.2009

 

 

 

EN ISO 11111-3:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11111-4:2005

Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

18.12.2009

 

 

 

EN ISO 11111-4:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11111-5:2005

Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

18.12.2009

 

 

 

EN ISO 11111-5:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11111-6:2005

Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

18.12.2009

 

 

 

EN ISO 11111-6:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11111-7:2005

Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

18.12.2009

 

 

 

EN ISO 11111-7:2005/A1:2009

18.12.2009

 

Date expired

(31.1.2010)

CEN

EN ISO 11148-1:2011

Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

24.8.2012

EN 792-1:2000+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-2:2011

Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)

29.2.2012

EN 792-2:2000+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-3:2012

Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2012)

5.4.2013

EN ISO 11148-3:2010

Date expired

(30.6.2013)

CEN

EN ISO 11148-4:2012

Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)

5.4.2013

EN ISO 11148-4:2010

Date expired

(30.6.2013)

CEN

EN ISO 11148-5:2011

Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills (ISO 11148-5:2011)

29.2.2012

EN 792-5:2000+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-6:2012

Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

5.4.2013

EN ISO 11148-6:2010

Date expired

(30.6.2013)

CEN

EN ISO 11148-7:2012

Hand-held non-electric power tools — Safety requirements — Part 7: Grinders (ISO 11148-7:2012)

15.11.2012

EN 792-7:2001+A1:2008

Date expired

(28.2.2013)

CEN

EN ISO 11148-8:2011

Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers (ISO 11148-8:2011)

29.2.2012

EN 792-8:2001+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-9:2011

Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders (ISO 11148-9:2011)

29.2.2012

EN 792-9:2001+A1:2008

Date expired

(1.6.2012)

CEN

EN ISO 11148-10:2011

Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools (ISO 11148-10:2011)

29.2.2012

EN 792-10:2000+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-11:2011

Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears (ISO 11148-11:2011)

29.2.2012

EN 792-11:2000+A1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11148-12:2012

Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)

5.4.2013

EN 792-12:2000+A1:2008

Date expired

(30.6.2013)

CEN

EN ISO 11252:2013

Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013)

28.11.2013

EN ISO 11252:2008

Date expired

(28.2.2014)

CEN

EN ISO 11553-1:2008

Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005)

8.9.2009

 

 

CEN

EN ISO 11553-2:2008

Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

8.9.2009

 

 

CEN

EN ISO 11553-3:2013

Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)

28.11.2013

 

 

CEN

EN ISO 11680-1:2011

Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)

29.2.2012

EN ISO 11680-1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11680-2:2011

Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)

29.2.2012

EN ISO 11680-2:2008

Date expired

(30.6.2012)

CEN

EN ISO 11681-1:2011

Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2011)

29.2.2012

EN ISO 11681-1:2008

Date expired

(30.6.2012)

CEN

EN ISO 11681-2:2011

Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2011)

29.2.2012

EN ISO 11681-2:2008

Date expired

(30.6.2012)

CEN

EN ISO 11806-1:2011

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)

29.2.2012

EN ISO 11806:2008

Date expired

(30.6.2012)

CEN

EN ISO 11806-2:2011

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)

29.2.2012

 

 

CEN

EN ISO 11850:2011

Machinery for forestry — General safety requirements (ISO 11850:2011)

29.2.2012

EN 14861:2004+A1:2009

Date expired

(31.5.2012)

CEN

EN 12001:2012

Conveying, spraying and placing machines for concrete and mortar — Safety requirements

15.11.2012

EN 12001:2003+A1:2009

Date expired

(28.2.2013)

CEN

EN 12012-1:2007+A1:2008

Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators

8.9.2009

 

 

CEN

EN 12012-3:2001+A1:2008

Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders

8.9.2009

 

 

CEN

EN 12012-4:2006+A1:2008

Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators

8.9.2009

 

 

CEN

EN 12013:2000+A1:2008

Plastics and rubber machines — Internal mixers — Safety requirements

8.9.2009

 

 

CEN

EN 12016:2013

Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity

28.11.2013

EN 12016:2004+A1:2008

Date expired

(28.2.2014)

CEN

EN 12041:2000+A1:2009

Food processing machinery — Moulders — Safety and hygiene requirements

18.12.2009

 

 

CEN

EN 12042:2014

Food processing machinery — Automatic dough dividers — Safety and hygiene requirements

13.2.2015

EN 12042:2005+A1:2010

13.2.2015

CEN

EN 12043:2000+A1:2010

Food processing machinery — Intermediate provers — Safety and hygiene requirements

8.4.2011

 

 

CEN

EN 12044:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements

18.12.2009

 

 

CEN

EN 12053:2001+A1:2008

Safety of industrial trucks — Test methods for measuring noise emissions

8.9.2009

 

 

CEN

EN 12077-2:1998+A1:2008

Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices

8.9.2009

 

 

CEN

EN 12110:2014

Tunnelling machines — Air locks — Safety requirements

13.2.2015

EN 12110:2002+A1:2008

13.2.2015

CEN

EN 12111:2014

Tunnelling machines — Road headers and continuous miners — Safety requirements

13.2.2015

EN 12111:2002+A1:2009

13.2.2015

CEN

EN 12158-1:2000+A1:2010

Builders' hoists for goods — Part 1: Hoists with accessible platforms

8.4.2011

 

 

CEN

EN 12158-2:2000+A1:2010

Builders' hoists for goods — Part 2: Inclined hoists with non-accessible load carrying devices

8.4.2011

 

 

CEN

EN 12159:2012

Builders hoists for persons and materials with vertically guided cages

5.4.2013

EN 12159:2000+A1:2009

Date expired

(31.5.2013)

CEN

EN 12162:2001+A1:2009

Liquid pumps — Safety requirements — Procedure for hydrostatic testing

8.9.2009

 

 

CEN

EN 12203:2003+A1:2009

Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements

18.12.2009

 

 

CEN

EN 12267:2003+A1:2010

Food processing machinery — Circular saw machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12268:2003+A1:2010

Food processing machinery — Band saw machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12301:2000+A1:2008

Plastics and rubber machines — Calenders — Safety requirements

8.9.2009

 

 

CEN

EN 12312-1:2013

Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs

28.11.2013

EN 12312-1:2001+A1:2009

Date expired

(28.11.2013)

CEN

EN 12312-2:2014

Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles

13.2.2015

EN 12312-2:2002+A1:2009

13.2.2015

CEN

EN 12312-3:2003+A1:2009

Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles

8.9.2009

 

 

CEN

EN 12312-4:2014

Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges

11.7.2014

EN 12312-4:2003+A1:2009

Date expired

(30.9.2014)

CEN

EN 12312-5:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment

8.9.2009

 

 

CEN

EN 12312-6:2004+A1:2009

Aircraft ground support equipment — Specific requirements — Part 6: Deicers and deicing/antiicing equipment

8.9.2009

 

 

CEN

EN 12312-7:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 7: Air-craft movement equipment

8.9.2009

 

 

CEN

EN 12312-8:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms

8.9.2009

 

 

CEN

EN 12312-9:2013

Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders

28.11.2013

EN 12312-9:2005+A1:2009

Date expired

(28.11.2013)

CEN

EN 12312-10:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters

8.9.2009

 

 

CEN

EN 12312-12:2002+A1:2009

Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment

8.9.2009

 

 

CEN

EN 12312-13:2002+A1:2009

Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment

8.9.2009

 

 

CEN

EN 12312-14:2014

Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles

13.2.2015

EN 12312-14:2006+A1:2009

13.2.2015

CEN

EN 12312-15:2006+A1:2009

Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors

8.9.2009

 

 

CEN

EN 12312-16:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment

8.9.2009

 

 

CEN

EN 12312-17:2004+A1:2009

Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment

8.9.2009

 

 

CEN

EN 12312-18:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units

8.9.2009

 

 

CEN

EN 12312-19:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

8.9.2009

 

 

CEN

EN 12312-20:2005+A1:2009

Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units

8.9.2009

 

 

CEN

EN 12321:2003+A1:2009

Underground mining machinery — Specification for the safety requirements of armoured face conveyors

8.9.2009

 

 

CEN

EN 12331:2003+A2:2010

Food processing machinery — Mincing machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12348:2000+A1:2009

Core drilling machines on stand — Safety

8.9.2009

 

 

CEN

EN 12355:2003+A1:2010

Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12385-1:2002+A1:2008

Steel wire ropes — Safety — Part 1: General requirements

8.9.2009

 

 

CEN

EN 12385-2:2002+A1:2008

Steel wire ropes — Safety — Part 2: Definitions, designation and classification

8.9.2009

 

 

CEN

EN 12385-3:2004+A1:2008

Steel wire ropes — Safety — Part 3: Information for use and maintenance

8.9.2009

 

 

CEN

EN 12385-4:2002+A1:2008

Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications

8.9.2009

 

 

CEN

EN 12385-10:2003+A1:2008

Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications

8.9.2009

 

 

CEN

EN 12387:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements

18.12.2009

 

 

CEN

EN 12409:2008+A1:2011

Plastics and rubber machines — Thermoforming machines — Safety requirements

29.2.2012

EN 12409:2008

Date expired

(30.4.2012)

CEN

EN 12417:2001+A2:2009

Machine tools — Safety — Machining centres

8.9.2009

 

 

 

EN 12417:2001+A2:2009/AC:2010

 

 

 

CEN

EN 12418:2000+A1:2009

Masonry and stone cutting-off machines for job site — Safety

8.9.2009

 

 

CEN

EN 12463:2004+A1:2011

Food processing machinery — Filling machines and auxiliary machines — Safety and hygiene requirements

20.7.2011

 

 

CEN

EN 12505:2000+A1:2009

Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements

18.12.2009

 

 

CEN

EN 12525:2000+A2:2010

Agricultural machinery — Front loaders — Safety

26.5.2010

 

 

CEN

EN 12545:2000+A1:2009

Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements

8.9.2009

 

 

CEN

EN 12547:1999+A1:2009

Centrifuges — Common safety requirements

8.9.2009

 

 

CEN

EN 12549:1999+A1:2008

Acoustics — Noise test code for fastener driving tools — Engineering method

8.9.2009

 

 

CEN

EN 12581:2005+A1:2010

Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements

20.10.2010

 

 

CEN

EN 12601:2010

Reciprocating internal combustion engine driven generating sets — Safety

8.4.2011

 

 

CEN

EN 12621:2006+A1:2010

Machinery for the supply and circulation of coating materials under pressure — Safety requirements

20.10.2010

 

 

CEN

EN 12622:2009+A1:2013

Safety of machine tools — Hydraulic press brakes

11.4.2014

EN 12622:2009

Date expired

(30.4.2014)

CEN

EN 12629-1:2000+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements

8.4.2011

 

 

CEN

EN 12629-2:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines

8.4.2011

 

 

CEN

EN 12629-3:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines

8.4.2011

 

 

CEN

EN 12629-4:2001+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4: Concrete roof tile making machines

8.4.2011

 

 

CEN

EN 12629-5-1:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-1: Pipe making machines manufacturing in the vertical axis

8.4.2011

 

 

CEN

EN 12629-5-2:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-2: Pipe making machines manufacturing in the horizontal axis

8.4.2011

 

 

CEN

EN 12629-5-3:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-3: Pipe prestressing machines

8.4.2011

 

 

CEN

EN 12629-5-4:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-4: Concrete pipe coating machines

8.4.2011

 

 

CEN

EN 12629-6:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

8.4.2011

 

 

CEN

EN 12629-7:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

8.4.2011

 

 

CEN

EN 12629-8:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

8.4.2011

 

 

CEN

EN 12635:2002+A1:2008

Industrial, commercial and garage doors and gates — Installation and use

8.9.2009

 

 

CEN

EN 12643:2014

Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified)

11.7.2014

EN 12643:1997+A1:2008

Date expired

(31.8.2014)

CEN

EN 12644-1:2001+A1:2008

Cranes — Information for use and testing — Part 1: Instructions

8.9.2009

 

 

CEN

EN 12644-2:2000+A1:2008

Cranes — Information for use and testing — Part 2: Marking

8.9.2009

 

 

CEN

EN 12649:2008+A1:2011

Concrete compactors and smoothing machines — Safety

18.11.2011

EN 12649:2008

Date expired

(31.1.2012)

CEN

EN 12653:1999+A2:2009

Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements

18.12.2009

 

 

CEN

EN 12693:2008

Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors

8.9.2009

 

 

CEN

EN 12717:2001+A1:2009

Safety of machine tools — Drilling machines

8.9.2009

 

 

CEN

EN 12733:2001+A1:2009

Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety

8.9.2009

 

 

CEN

EN 12750:2013

Safety of woodworking machines — Four sided moulding machines

28.11.2013

EN 12750:2001+A1:2009

Date expired

(28.11.2013)

CEN

EN 12753:2005+A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements

20.10.2010

 

 

CEN

EN 12757-1:2005+A1:2010

Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing

20.10.2010

 

 

CEN

EN 12779:2004+A1:2009

Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety related performances and safety requirements

18.12.2009

 

 

CEN

EN 12851:2005+A1:2010

Food processing machinery — Catering attachments for machines having an auxiliary drive hub — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 12852:2001+A1:2010

Food processing machinery — Food processors and blenders — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12853:2001+A1:2010

Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements

20.10.2010

 

 

 

EN 12853:2001+A1:2010/AC:2010

 

 

 

CEN

EN 12854:2003+A1:2010

Food processing machinery — Beam mixers — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 12855:2003+A1:2010

Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12881-1:2014

Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests

13.2.2015

EN 12881-1:2005+A1:2008

13.2.2015

CEN

EN 12881-2:2005+A1:2008

Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test

8.9.2009

 

 

CEN

EN 12882:2008

Conveyor belts for general purpose use — Electrical and flammability safety requirements

8.9.2009

 

 

CEN

EN 12921-1:2005+A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 1: Common safety requirements

20.10.2010

 

 

CEN

EN 12921-2:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids

8.9.2009

 

 

CEN

EN 12921-3:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids

8.9.2009

 

 

CEN

EN 12921-4:2005+A1:2008

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents

8.9.2009

 

 

CEN

EN 12965:2003+A2:2009

Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety

18.12.2009

 

 

CEN

EN 12978:2003+A1:2009

Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods

18.12.2009

 

 

CEN

EN 12981:2005+A1:2009

Coating plants — Spray booths for application of organic powder coating material — Safety requirements

8.9.2009

 

 

CEN

EN 12984:2005+A1:2010

Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 12999:2011+A1:2012

Cranes — Loader cranes

24.8.2012

EN 12999:2011

Date expired

(31.12.2012)

CEN

EN 13000:2010+A1:2014

Cranes — Mobile cranes

13.2.2015

EN 13000:2010

13.2.2015

CEN

EN 13001-1:2004+A1:2009

Cranes — General design — Part 1: General principles and requirements

8.9.2009

 

 

 

EN 13001-1:2004+A1:2009/AC:2009

 

 

 

CEN

EN 13001-2:2011

Crane safety — General design — Part 2: Load actions

18.11.2011

EN 13001-2:2004+A3:2009

Date expired

(18.11.2011)

 

EN 13001-2:2011/AC:2012

 

 

 

CEN

EN 13001-3-1:2012+A1:2013

Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure

28.11.2013

EN 13001-3-1:2012

Date expired

(31.1.2014)

CEN

EN 13015:2001+A1:2008

Maintenance for lifts and escalators — Rules for maintenance instructions

8.9.2009

 

 

CEN

EN 13019:2001+A1:2008

Machines for road surface cleaning — Safety requirements

8.9.2009

 

 

CEN

EN 13020:2004+A1:2010

Road surface treatment machines — Safety requirements

20.10.2010

 

 

CEN

EN 13021:2003+A1:2008

Winter service machines — Safety requirements

8.9.2009

 

 

CEN

EN 13023:2003+A1:2010

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3

26.5.2010

 

 

CEN

EN 13035-1:2008

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory

8.9.2009

 

 

CEN

EN 13035-2:2008

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory

8.9.2009

 

 

CEN

EN 13035-3:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines

18.12.2009

 

 

 

EN 13035-3:2003+A1:2009/AC:2010

 

 

 

CEN

EN 13035-4:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables

26.5.2010

 

 

CEN

EN 13035-5:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking

26.5.2010

 

 

CEN

EN 13035-6:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out

26.5.2010

 

 

CEN

EN 13035-7:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass

26.5.2010

 

 

CEN

EN 13035-9:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations

26.5.2010

 

 

CEN

EN 13035-11:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines

26.5.2010

 

 

CEN

EN 13042-1:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder

18.12.2009

 

 

CEN

EN 13042-2:2004+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding

18.12.2009

 

 

CEN

EN 13042-3:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines

18.12.2009

 

 

CEN

EN 13042-5:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses

18.12.2009

 

 

CEN

EN 13059:2002+A1:2008

Safety of industrial trucks — Test methods for measuring vibration

8.9.2009

 

 

CEN

EN 13102:2005+A1:2008

Ceramic machines — Safety — Loading and unloading of fine clay tiles

8.9.2009

 

 

CEN

EN 13112:2002+A1:2009

Tannery machines — Splitting and bandknife shearing machines — Safety requirements

26.5.2010

 

 

CEN

EN 13113:2002+A1:2010

Tannery machines — Roller coating machines — Safety requirements

8.4.2011

 

 

CEN

EN 13114:2002+A1:2009

Tannery machines — Rotating process vessels — Safety requirements

26.5.2010

 

 

CEN

EN 13118:2000+A1:2009

Agricultural machinery — Potato harvesting equipment — Safety

18.12.2009

 

 

CEN

EN 13120:2009+A1:2014

Internal blinds — Performance requirements including safety

11.7.2014

EN 13120:2009

Date expired

(31.8.2014)

CEN

EN 13128:2001+A2:2009

Safety of machine tools — Milling machines (including boring machines)

8.9.2009

 

 

 

EN 13128:2001+A2:2009/AC:2010

 

 

 

CEN

EN 13135:2013

Cranes — Safety — Design — Requirements for equipment

28.11.2013

EN 13135-2:2004+A1:2010

EN 13135-1:2003+A1:2010

Date expired

(28.11.2013)

CEN

EN 13140:2000+A1:2009

Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety

18.12.2009

 

 

CEN

EN 13155:2003+A2:2009

Cranes — Safety — Non-fixed load lifting attachments

8.9.2009

 

 

CEN

EN 13157:2004+A1:2009

Cranes — Safety — Hand powered cranes

18.12.2009

 

 

CEN

EN 13204:2004+A1:2012

Double acting hydraulic rescue tools for fire and rescue service use — Safety and performance requirements

24.8.2012

 

 

CEN

EN 13208:2003+A1:2010

Food processing machinery — Vegetable peelers — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13218:2002+A1:2008

Machine tools — Safety — Stationary grinding machines

8.9.2009

 

 

 

EN 13218:2002+A1:2008/AC:2010

 

 

 

CEN

EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics

18.11.2011

 

 

CEN

EN 13288:2005+A1:2009

Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13289:2001+A1:2013

Pasta processing plants — Dryers and coolers — Safety and hygiene requirements

28.11.2013

 

 

CEN

EN 13355:2004+A1:2009

Coating plants — Combined booths — Safety requirements

8.9.2009

 

 

CEN

EN 13367:2005+A1:2008

Ceramic machines — Safety — Transfer platforms and cars

8.9.2009

 

 

 

EN 13367:2005+A1:2008/AC:2009

 

 

 

CEN

EN 13378:2001+A1:2013

Pasta processing plants — Pasta presses — Safety and hygiene requirements

28.11.2013

 

 

CEN

EN 13379:2001+A1:2013

Pasta processing plants — Spreader, stripping and cutting machine, stick return conveyor, stick magazine — Safety and hygiene requirements

28.11.2013

 

 

CEN

EN 13389:2005+A1:2009

Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13390:2002+A1:2009

Food processing machinery — Pie and tart machines — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13411-1:2002+A1:2008

Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings

8.9.2009

 

 

CEN

EN 13411-2:2001+A1:2008

Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings

8.9.2009

 

 

CEN

EN 13411-3:2004+A1:2008

Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing

8.9.2009

 

 

CEN

EN 13411-4:2011

Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing

20.7.2011

EN 13411-4:2002+A1:2008

Date expired

(30.9.2011)

CEN

EN 13411-5:2003+A1:2008

Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips

8.9.2009

 

 

CEN

EN 13411-6:2004+A1:2008

Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket

8.9.2009

 

 

CEN

EN 13411-7:2006+A1:2008

Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket

8.9.2009

 

 

CEN

EN 13411-8:2011

Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging

18.11.2011

 

 

CEN

EN 13414-1:2003+A2:2008

Steel wire rope slings — Safety — Part 1: Slings for general lifting service

8.9.2009

 

 

CEN

EN 13414-2:2003+A2:2008

Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer

8.9.2009

 

 

CEN

EN 13414-3:2003+A1:2008

Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings

8.9.2009

 

 

CEN

EN 13418:2013

Plastics and rubber machines — Winding machines for film or sheet — Safety requirements

28.11.2013

EN 13418:2004+A1:2008

Date expired

(30.11.2013)

CEN

EN 13448:2001+A1:2009

Agricultural and forestry machinery — Inter-row mowing units — Safety

18.12.2009

 

 

CEN

EN 13457:2004+A1:2010

Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements

20.10.2010

 

 

CEN

EN ISO 13482:2014

Robots and robotic devices — Safety requirements for personal care robots (ISO 13482:2014)

11.7.2014

 

 

CEN

EN 13524:2003+A2:2014

Highway maintenance machines — Safety requirements

11.7.2014

EN 13524:2003+A1:2009

Date expired

(31.8.2014)

CEN

EN 13525:2005+A2:2009

Forestry machinery — Wood chippers — Safety

18.12.2009

 

 

CEN

EN 13531:2001+A1:2008

Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified)

8.9.2009

 

 

CEN

EN 13534:2006+A1:2010

Food processing machinery — Curing injection machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13557:2003+A2:2008

Cranes — Controls and control stations

8.9.2009

 

 

CEN

EN 13561:2004+A1:2008

External blinds — Performance requirements including safety

8.9.2009

 

 

CEN

EN 13570:2005+A1:2010

Food processing machinery — Mixing machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13586:2004+A1:2008

Cranes — Access

8.9.2009

 

 

CEN

EN 13591:2005+A1:2009

Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13617-1:2012

Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

24.8.2012

EN 13617-1:2004+A1:2009

Date expired

(30.11.2012)

CEN

EN 13621:2004+A1:2010

Food processing machinery — Salad dryers — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13659:2004+A1:2008

Shutters — Performance requirements including safety

8.9.2009

 

 

CEN

EN 13675:2004+A1:2010

Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment

20.10.2010

 

 

CEN

EN 13683:2003+A2:2011

Garden equipment — Integrally powered shredders/chippers — Safety

20.7.2011

 

 

 

EN 13683:2003+A2:2011/AC:2013

 

 

 

CEN

EN 13684:2004+A3:2009

Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety

26.5.2010

EN 13684:2004+A2:2009

Date expired

(30.6.2010)

CEN

EN 13731:2007

Lifting bag systems for fire and rescue service use — Safety and performance requirements

8.9.2009

 

 

CEN

EN 13732:2013

Food processing machinery — Bulk milk coolers on farms — Requirements for performance, safety and hygiene

28.11.2013

EN 13732:2002+A2:2009

Date expired

(31.1.2014)

CEN

EN 13736:2003+A1:2009

Safety of machine tools — Pneumatic presses

8.9.2009

 

 

CEN

EN 13852-1:2013

Cranes — Offshore cranes — Part 1: General-purpose offshore cranes

28.11.2013

 

 

CEN

EN 13862:2001+A1:2009

Floor cutting-off machines — Safety

8.9.2009

 

 

CEN

EN 13870:2005+A1:2010

Food processing machinery — Chop cutting machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13871:2005+A1:2010

Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13885:2005+A1:2010

Food processing machinery — Clipping machines — Safety and hygiene requirements

20.10.2010

 

 

CEN

EN 13886:2005+A1:2010

Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13889:2003+A1:2008

Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety

8.9.2009

 

 

CEN

EN 13898:2003+A1:2009

Machine tools — Safety — Sawing machines for cold metal

8.9.2009

 

 

 

EN 13898:2003+A1:2009/AC:2010

 

 

 

CEN

EN 13951:2012

Liquid pumps — Safety requirements — Agrifoodstuffs equipment; Design rules to ensure hygiene in use

24.8.2012

EN 13951:2003+A1:2008

Date expired

(31.10.2012)

CEN

EN 13954:2005+A1:2010

Food processing machinery — Bread slicers — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 13977:2011

Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance

20.7.2011

 

 

CEN

EN 13985:2003+A1:2009

Machine tools — Safety — Guillotine shears

8.9.2009

 

 

CEN

EN 14010:2003+A1:2009

Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages

18.12.2009

 

 

CEN

EN 14017:2005+A2:2009

Agricultural and forestry machinery — Solid fertilizer distributors — Safety

18.12.2009

EN 14017:2005+A1:2008

Date expired

(31.1.2010)

CEN

EN 14018:2005+A1:2009

Agricultural and forestry machinery — Seed drills — Safety

18.12.2009

 

 

CEN

EN 14033-3:2009+A1:2011

Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements

29.2.2012

EN 14033-3:2009

Date expired

(30.4.2012)

CEN

EN 14043:2014

High rise aerial appliances for fire and rescue service use — Turntable ladders with combined movements — Safety and performance requirements and test methods

11.7.2014

EN 14043:2005+A1:2009

Date expired

(31.7.2014)

CEN

EN 14044:2014

High rise aerial appliances for fire and rescue service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods

11.7.2014

EN 14044:2005+A1:2009

Date expired

(31.7.2014)

CEN

EN 14070:2003+A1:2009

Safety of machine tools — Transfer and special-purpose machines

8.9.2009

 

 

 

EN 14070:2003+A1:2009/AC:2010

 

 

 

CEN

EN 14238:2004+A1:2009

Cranes — Manually controlled load manipulating devices

18.12.2009

 

 

CEN

EN ISO 14314:2009

Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004)

18.12.2009

 

 

CEN

EN 14439:2006+A2:2009

Cranes — Safety — Tower cranes

8.9.2009

 

 

CEN

EN 14462:2005+A1:2009

Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3

8.9.2009

 

 

CEN

EN 14466:2005+A1:2008

Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests

8.9.2009

 

 

CEN

EN 14492-1:2006+A1:2009

Cranes — Power driven winches and hoists — Part 1: Power driven winches

18.12.2009

 

 

 

EN 14492-1:2006+A1:2009/AC:2010

 

 

 

CEN

EN 14492-2:2006+A1:2009

Cranes — Power driven winches and hoists — Part 2: Power driven hoists

18.12.2009

 

 

 

EN 14492-2:2006+A1:2009/AC:2010

 

 

 

CEN

EN 14502-2:2005+A1:2008

Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations

8.9.2009

 

 

CEN

EN 14655:2005+A1:2010

Food processing machinery — Baguette slicers — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 14656:2006+A1:2010

Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals

20.10.2010

 

 

CEN

EN 14658:2005+A1:2010

Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining

26.5.2010

 

 

CEN

EN 14673:2006+A1:2010

Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

20.10.2010

 

 

CEN

EN 14677:2008

Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel

8.9.2009

 

 

CEN

EN 14681:2006+A1:2010

Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces

20.10.2010

 

 

CEN

EN 14710-1:2005+A2:2008

Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements

8.9.2009

 

 

CEN

EN 14710-2:2005+A2:2008

Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements

8.9.2009

 

 

CEN

EN 14753:2007

Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel

8.9.2009

 

 

CEN

EN 14886:2008

Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements

8.9.2009

 

 

CEN

EN 14910:2007+A1:2009

Garden equipment — Walk-behind combustion engine powered trimmers — Safety

8.9.2009

 

 

CEN

EN 14930:2007+A1:2009

Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces

8.9.2009

 

 

CEN

EN 14957:2006+A1:2010

Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements

26.5.2010

 

 

CEN

EN 14958:2006+A1:2009

Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements

8.9.2009

 

 

CEN

EN 14973:2006+A1:2008

Conveyor belts for use in underground installations — Electrical and flammability safety requirements

8.9.2009

 

 

CEN

EN ISO 14982:2009

Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998)

8.9.2009

 

 

CEN

EN 14985:2012

Cranes — Slewing jib cranes

23.3.2012

 

 

CEN

EN 15000:2008

Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

8.9.2009

 

 

CEN

EN 15011:2011+A1:2014

Cranes — Bridge and gantry cranes

11.7.2014

EN 15011:2011

Date expired

(31.8.2014)

CEN

EN 15027:2007+A1:2009

Transportable wall saw and wire saw equipment for job site — Safety

8.9.2009

 

 

CEN

EN 15056:2006+A1:2009

Cranes — Requirements for container handling spreaders

8.9.2009

 

 

CEN

EN 15059:2009

Snow grooming equipment — Safety requirements

8.9.2009

 

 

CEN

EN 15061:2007+A1:2008

Safety of machinery — Safety requirements for strip processing line machinery and equipment

8.9.2009

 

 

CEN

EN 15067:2007

Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements

8.9.2009

 

 

CEN

EN 15093:2008

Safety of Machinery — Safety requirements for hot flat rolling mills

8.9.2009

 

 

CEN

EN 15094:2008

Safety of Machinery — Safety requirements for cold flat rolling mills

8.9.2009

 

 

CEN

EN 15095:2007+A1:2008

Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements

8.9.2009

 

 

CEN

EN 15162:2008

Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws

8.9.2009

 

 

CEN

EN 15163:2008

Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws

8.9.2009

 

 

CEN

EN 15164:2008

Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines

8.9.2009

 

 

CEN

EN 15166:2008

Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements

8.9.2009

 

 

CEN

EN 15268:2008

Petrol filling stations — Safety requirements for the construction of submersible pump assemblies

8.9.2009

 

 

CEN

EN 15503:2009+A1:2013

Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety

11.4.2014

EN 15503:2009

Date expired

(30.4.2014)

CEN

EN 15695-1:2009

Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures

26.5.2010

 

 

CEN

EN 15695-2:2009

Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures

26.5.2010

 

 

 

EN 15695-2:2009/AC:2011

 

 

 

CEN

EN 15700:2011

Safety for conveyor belts for winter sport or leisure use

29.2.2012

 

 

CEN

EN ISO 15744:2008

Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002)

8.9.2009

 

 

CEN

EN 15746-2:2010+A1:2011

Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements

29.2.2012

EN 15746-2:2010

Date expired

(30.4.2012)

CEN

EN 15774:2010

Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements

8.4.2011

 

 

CEN

EN 15811:2009

Agricultural machinery — Guards for moving parts of power transmission — Guard opening with tool (ISO/TS 28923:2007 modified)

18.12.2009

 

 

 

EN 15811:2009/AC:2010

 

 

 

CEN

EN 15830:2012

Rough-terrain variable reach trucks — Visibility — Test methods and verification

24.8.2012

 

 

CEN

EN 15861:2012

Food processing machinery — Smokehouses — Safety and hygiene requirements

24.8.2012

 

 

CEN

EN 15895:2011

Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools

18.11.2011

 

 

CEN

EN 15949:2012

Safety of machinery — Safety requirements for bar mills, structural steel mills and wire rod mills

5.6.2012

 

 

CEN

EN 15954-2:2013

Railway applications — Track — Trailers and associated equipment — Part 2: General safety requirements

28.11.2013

 

 

CEN

EN 15955-2:2013

Railway applications — Track — Demountable machines and associated equipment — Part 2: General safety requirements

28.11.2013

 

 

CEN

EN 15997:2011

All terrain vehicles (ATVs — Quads) — Safety requirements and test methods

29.2.2012

 

 

 

EN 15997:2011/AC:2012

 

 

 

CEN

EN 16005:2012

Power operated pedestrian doorsets — Safety in use — Requirements and test methods

5.4.2013

 

 

CEN

EN 16029:2012

Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads — Single-track two-wheel motor vehicles — Safety requirements and test methods

24.8.2012

 

 

CEN

EN ISO 16119-1:2013

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General (ISO 16119-1:2013)

28.11.2013

 

 

CEN

EN ISO 16119-2:2013

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers (ISO 16119-2:2013)

28.11.2013

 

 

CEN

EN ISO 16119-3:2013

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)

28.11.2013

 

 

CEN

EN 16191:2014

Tunnelling machinery — Safety requirements

13.2.2015

EN 815:1996+A2:2008

EN 12336:2005+A1:2008

13.2.2015

CEN

EN 16203:2014

Safety of Industrial Trucks — Dynamic tests for verification of lateral stability — Counterbalanced Trucks

13.2.2015

 

 

CEN

EN 16228-1:2014

Drilling and foundation equipment — Safety — Part 1: Common requirements

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16228-2:2014

Drilling and foundation equipment — Safety — Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16228-3:2014

Drilling and foundation equipment — Safety — Part 3: Horizontal directional drilling equipment (HDD)

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16228-4:2014

Drilling and foundation equipment — Safety — Part 4: Foundation equipment

13.2.2015

EN 996:1995+A3:2009

EN 791:1995+A1:2009

13.2.2015

CEN

EN 16228-5:2014

Drilling and foundation equipment — Safety — Part 5: Diaphragm walling equipment

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16228-6:2014

Drilling and foundation equipment — Safety — Part 6: Jetting, grouting and injection equipment

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16228-7:2014

Drilling and foundation equipment — Safety — Part 7: Interchangeable auxiliary equipment

13.2.2015

EN 791:1995+A1:2009

EN 996:1995+A3:2009

13.2.2015

CEN

EN 16230-1:2013

Leisure karts — Part 1: Safety requirements and test methods for karts

28.11.2013

 

 

CEN

EN ISO 16231-1:2013

Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles (ISO 16231-1:2013)

28.11.2013

 

 

CEN

EN 16246:2012

Agricultural machinery — Backhoes — Safety

5.4.2013

 

 

CEN

EN 16252:2012

Machines for compacting waste materials or recyclable fractions — Horizontal baling presses — Safety requirements

5.4.2013

 

 

CEN

EN 16307-1:2013

Industrial trucks — Safety requirements and verification — Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

5.4.2013

 

 

CEN

EN 16307-5:2013

Industrial trucks — Safety requirements and verification — Part 5: Supplementary requirements for pedestrian-propelled trucks

11.7.2014

 

 

CEN

EN 16307-6:2014

Industrial trucks — Safety requirements and verification — Part 6: Supplementary requirements for burden and personnel carriers

11.7.2014

 

 

CEN

EN 16327:2014

Fire-fighting — Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)

11.7.2014

 

 

CEN

EN 16590-1:2014

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development (ISO 25119-1:2010 modified)

13.2.2015

 

 

CEN

EN 16590-2:2014

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase (ISO 25119-2:2010 modified)

13.2.2015

 

 

CEN

EN 16590-3:2014

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)

13.2.2015

 

 

CEN

EN 16590-4:2014

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)

13.2.2015

 

 

CEN

EN ISO 19432:2012

Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements (ISO 19432:2012)

15.11.2012

EN ISO 19432:2008

Date expired

(31.1.2013)

CEN

EN ISO 19932-1:2013

Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements (ISO 19932-1:2013)

28.11.2013

 

 

CEN

EN ISO 19932-2:2013

Equipment for crop protection — Knapsack sprayers — Part 2: Test methods (ISO 19932-2:2013)

28.11.2013

 

 

CEN

EN ISO 20361:2009

Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2007)

8.9.2009

 

 

 

EN ISO 20361:2009/AC:2010

 

 

 

CEN

EN ISO 22867:2011

Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011)

29.2.2012

EN ISO 22867:2008

Date expired

(30.6.2012)

CEN

EN ISO 22868:2011

Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2011)

20.7.2011

EN ISO 22868:2008

Date expired

(30.9.2011)

CEN

EN ISO 23125:2010

Machine tools — Safety — Turning machines (ISO 23125:2010)

20.10.2010

 

 

 

EN ISO 23125:2010/A1:2012

24.8.2012

 

Date expired

(31.10.2012)

CEN

EN ISO 28139:2009

Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009)

18.12.2009

 

 

CEN

EN ISO 28881:2013

Machine tools — Safety — Electro-discharge machines (ISO 28881:2013)

28.11.2013

EN 12957:2001+A1:2009

Date expired

(28.2.2014)

 

EN ISO 28881:2013/AC:2013

 

 

 

CEN

EN ISO 28927-1:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009)

26.5.2010

 

 

CEN

EN ISO 28927-2:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

26.5.2010

 

 

CEN

EN ISO 28927-3:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

26.5.2010

 

 

CEN

EN ISO 28927-4:2010

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010)

8.4.2011

 

 

CEN

EN ISO 28927-5:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009)

26.5.2010

 

 

CEN

EN ISO 28927-6:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009)

26.5.2010

 

 

CEN

EN ISO 28927-7:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009)

26.5.2010

 

 

CEN

EN ISO 28927-8:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

26.5.2010

 

 

CEN

EN ISO 28927-9:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

26.5.2010

 

 

CEN

EN ISO 28927-10:2011

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

18.11.2011

 

 

CEN

EN ISO 28927-11:2011

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers (ISO 28927-11:2011)

20.7.2011

 

 

CEN

EN ISO 28927-12:2012

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders (ISO 28927-12:2012)

5.4.2013

 

 

Standards developed by CENELEC

Standards developed by CENELEC are not classified as A, B or C-type standards in this list.

Cenelec

EN 50223:2010

Stationary electrostatic application equipment for ignitable flock material — Safety requirements

20.10.2010

 

 

Cenelec

EN 50348:2010

Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements

26.5.2010

 

 

 

EN 50348:2010/AC:2010

 

 

 

Cenelec

EN 50434:2014

Safety of household and similar appliances — Particular requirements for mains operated shredders and chippers

13.2.2015

 

 

Cenelec

EN 50569:2013

Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors

11.4.2014

 

 

Cenelec

EN 50570:2013

Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers

11.4.2014

 

 

Cenelec

EN 50571:2013

Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines

11.4.2014

 

 

Cenelec

EN 50580:2012

Safety of hand-held electric motor operated tools — Particular requirements for spray guns

5.6.2012

 

 

 

EN 50580:2012/A1:2013

28.11.2013

 

22.7.2016

Cenelec

EN 50636-2-91:2014

Household and similar electrical appliances — Safety — Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers

IEC 60335-2-91:2008 (Modified)

13.2.2015

 

 

Cenelec

EN 50636-2-92:2014

Household and similar electrical appliances — Safety — Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators

IEC 60335

IEC 60335-2-92:2002 (Modified)

13.2.2015

 

 

Cenelec

EN 50636-2-94:2014

Household and similar electrical appliances — Safety — Part 2-94: Particular requirements for scissors type grass shears

IEC 60335-2-94:2008 (Modified)

13.2.2015

 

 

Cenelec

EN 50636-2-100:2014

Household and similar electrical appliances — Safety — Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums

IEC 60335-2-100:2002 (Modified)

13.2.2015

 

 

Cenelec

EN 60204-1:2006

Safety of machinery — Electrical equipment of machines — Part 1: General requirements

IEC 60204-1:2005 (Modified)

26.5.2010

 

 

 

EN 60204-1:2006/AC:2010

 

 

 

 

EN 60204-1:2006/A1:2009

IEC 60204-1:2005/A1:2008

26.5.2010

 

Date expired

(1.2.2012)

Cenelec

EN 60204-11:2000

Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1  000 V a.c. or 1  500 V d.c. and not exceeding 36 kV

IEC 60204-11:2000

26.5.2010

 

 

 

EN 60204-11:2000/AC:2010

 

 

 

Cenelec

EN 60204-31:2013

Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems

IEC 60204-31:2013

11.4.2014

 

 

Cenelec

EN 60204-32:2008

Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines

IEC 60204-32:2008

18.12.2009

 

 

Cenelec

EN 60204-33:2011

Safety of machinery — Electrical equipment of machines — Part 33: Requirements for semiconductor fabrication equipment

IEC 60204-33:2009 (Modified)

18.11.2011

 

 

Cenelec

EN 60335-1:2012

Household and similar electrical appliances — Safety — Part 1: General requirements

IEC 60335-1:2010 (Modified)

5.6.2012

EN 60335-1:2002

Date expired

(21.11.2014)

 

EN 60335-1:2012/AC:2014

 

 

 

Cenelec

EN 60335-2-36:2002

Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

IEC 60335-2-36:2002

5.4.2013

 

 

 

EN 60335-2-36:2002/AC:2007

 

 

 

 

EN 60335-2-36:2002/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-37:2002

Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers

IEC 60335-2-37:2002

5.4.2013

 

 

 

EN 60335-2-37:2002/AC:2007

 

 

 

 

EN 60335-2-37:2002/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-40:2003

Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60335-2-40:2002 (Modified)

28.11.2013

 

 

 

EN 60335-2-40:2003/AC:2006

 

 

 

 

EN 60335-2-40:2003/AC:2010

 

 

 

 

EN 60335-2-40:2003/A11:2004

28.11.2013

 

Date expired

(28.11.2013)

 

EN 60335-2-40:2003/A12:2005

28.11.2013

 

Date expired

(28.11.2013)

 

EN 60335-2-40:2003/A1:2006

IEC 60335-2-40:2002/A1:2005 (Modified)

28.11.2013

 

Date expired

(28.11.2013)

 

EN 60335-2-40:2003/A2:2009

IEC 60335-2-40:2002/A2:2005 (Modified)

28.11.2013

 

Date expired

(28.11.2013)

 

EN 60335-2-40:2003/A13:2012

28.11.2013

 

Date expired

(11.7.2014)

 

EN 60335-2-40:2003/A13:2012/AC:2013

 

 

 

Cenelec

EN 60335-2-42:2003

Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

IEC 60335-2-42:2002

5.4.2013

 

 

 

EN 60335-2-42:2003/AC:2007

 

 

 

 

EN 60335-2-42:2003/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-47:2003

Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans

IEC 60335-2-47:2002

5.4.2013

 

 

 

EN 60335-2-47:2003/AC:2007

 

 

 

 

EN 60335-2-47:2003/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-48:2003

Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters

IEC 60335-2-48:2002

5.4.2013

 

 

 

EN 60335-2-48:2003/AC:2007

 

 

 

 

EN 60335-2-48:2003/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-49:2003

Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

IEC 60335-2-49:2002

5.4.2013

 

 

 

EN 60335-2-49:2003/AC:2007

 

 

 

 

EN 60335-2-49:2003/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-65:2003

Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances

IEC 60335-2-65:2002

5.4.2013

 

 

 

EN 60335-2-65:2003/A11:2012

5.4.2013

 

13.2.2015

Cenelec

EN 60335-2-67:2012

Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment machines for commercial use

IEC 60335-2-67:2012 (Modified)

15.11.2012

EN 60335-2-67:2009

3.5.2015

Cenelec

EN 60335-2-68:2012

Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use

IEC 60335-2-68:2012 (Modified)

15.11.2012

EN 60335-2-68:2009

3.5.2015

Cenelec

EN 60335-2-69:2012

Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use

IEC 60335-2-69:2012 (Modified)

15.11.2012

EN 60335-2-69:2009

28.3.2015

Cenelec

EN 60335-2-72:2012

Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

IEC 60335-2-72:2012 (Modified)

15.11.2012

EN 60335-2-72:2009

3.5.2015

Cenelec

EN 60335-2-77:2010

Safety of household and similar appliances — Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers

IEC 60335-2-77:2002 (Modified)

8.4.2011

 

 

Cenelec

EN 60335-2-79:2012

Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

IEC 60335-2-79:2012 (Modified)

15.11.2012

EN 60335-2-79:2009

3.4.2015

Cenelec

EN 60745-1:2009

Hand-held motor-operated electric tools — Safety — Part 1: General requirements

IEC 60745-1:2006 (Modified)

18.12.2009

 

 

 

EN 60745-1:2009/AC:2009

 

 

 

 

EN 60745-1:2009/A11:2010

8.4.2011

 

Date expired

(1.10.2013)

Cenelec

EN 60745-2-1:2010

Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills

IEC 60745-2-1:2003 (Modified)

IEC 60745-2-1:2003/A1:2008

20.10.2010

 

 

Cenelec

EN 60745-2-2:2010

Hand-held motor-operated electric tools — Safety — Part 2-2: Particular requirements for screwdrivers and impact wrenches

IEC 60745-2-2:2003 (Modified)

IEC 60745-2-2:2003/A1:2008

20.10.2010

 

 

Cenelec

EN 60745-2-3:2011

Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

IEC 60745-2-3:20

IEC 60745-2-3:2006 (Modified)

IEC 60745-2-3:2006/A1:2010 (Modified)

18.11.2011

 

 

 

EN 60745-2-3:2011/A2:2013

IEC 60745-2-3:2006/A2:2012 (Modified)

28.11.2013

 

25.2.2016

 

EN 60745-2-3:2011/A11:2014

13.2.2015

 

21.4.2016

Cenelec

EN 60745-2-4:2009

Hand-held motor-operated electric tools — Safety — Part 2-4: Particular requirements for sanders and polishers other than disk type

IEC 60745-2-4:2002 (Modified)

IEC 60745-2-4:2002/A1:2008 (Modified)

26.5.2010

 

 

 

EN 60745-2-4:2009/A11:2011

29.2.2012

 

Date expired

(14.11.2014)

Cenelec

EN 60745-2-5:2010

Hand-held motor-operated electric tools — Safety — Part 2-5: Particular requirements for circular saws

IEC 60745-2-5:2010 (Modified)

8.4.2011

 

 

Cenelec

EN 60745-2-6:2010

Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers

IEC 60745-2-6:2003 (Modified)

IEC 60745-2-6:2003/A1:2006

IEC 60745-2-6:2003/A2:2008

20.10.2010

 

 

Cenelec

EN 60745-2-8:2009

Hand-held motor-operated electric tools — Safety — Part 2-8: Particular requirements for shears and nibblers

IEC 60745-2-8:2003 (Modified)

IEC 60745-2-8:2003/A1:2008

18.12.2009

 

 

Cenelec

EN 60745-2-9:2009

Hand-held motor-operated electric tools — Safety — Part 2-9: Particular requirements for tappers

IEC 60745-2-9:2003 (Modified)

IEC 60745-2-9:2003/A1:2008

18.12.2009

 

 

Cenelec

EN 60745-2-11:2010

Hand-held motor-operated electric tools — Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

IEC 60745-2-11:2003 (Modified)

IEC 60745-2-11:2003/A1:2008

20.10.2010

 

 

Cenelec

EN 60745-2-12:2009

Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators

IEC 60745-2-12:2003 (Modified)

IEC 60745-2-12:2003/A1:2008

18.12.2009

 

 

Cenelec

EN 60745-2-13:2009

Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws

IEC 60745-2-13:2006 (Modified)

18.12.2009

 

 

 

EN 60745-2-13:2009/A1:2010

IEC 60745-2-13:2006/A1:2009

20.7.2011

 

Date expired

(1.12.2013)

Cenelec

EN 60745-2-14:2009

Hand-held motor-operated electric tools — Safety — Part 2-14: Particular requirements for planers

IEC 60745-2-14:2003 (Modified)

IEC 60745-2-14:2003/A1:2006 (Modified)

18.12.2009

 

 

 

EN 60745-2-14:2009/A2:2010

IEC 60745-2-14:2003/A2:2010

8.4.2011

 

Date expired

(1.6.2013)

Cenelec

EN 60745-2-15:2009

Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers

IEC 60745-2-15:2006 (Modified)

18.12.2009

 

 

 

EN 60745-2-15:2009/A1:2010

IEC 60745-2-15:2006/A1:2009

28.11.2013

 

Date expired

(28.11.2013)

Cenelec

EN 60745-2-16:2010

Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers

IEC 60745-2-16:2008 (Modified)

8.4.2011

 

 

Cenelec

EN 60745-2-17:2010

Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers

IEC 60745-2-17:2010 (Modified)

8.4.2011

 

 

Cenelec

EN 60745-2-18:2009

Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools

IEC 60745-2-18:2003 (Modified)

IEC 60745-2-18:2003/A1:2008

18.12.2009

 

 

Cenelec

EN 60745-2-19:2009

Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers

IEC 60745-2-19:2005 (Modified)

18.12.2009

 

 

 

EN 60745-2-19:2009/A1:2010

IEC 60745-2-19:2005/A1:2010

8.4.2011

 

Date expired

(1.6.2013)

Cenelec

EN 60745-2-20:2009

Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws

IEC 60745-2-20:2003 (Modified)

IEC 60745-2-20:2003/A1:2008

18.12.2009

 

 

Cenelec

EN 60745-2-21:2009

Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners

IEC 60745-2-21:2002 (Modified)

18.12.2009

 

 

 

EN 60745-2-21:2009/A1:2010

IEC 60745-2-21:2002/A1:2008

20.7.2011

 

Date expired

(1.12.2013)

Cenelec

EN 60745-2-22:2011

Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines

IEC 60745-2-22:2011 (Modified)

18.11.2011

 

 

 

EN 60745-2-22:2011/A11:2013

28.11.2013

 

17.12.2015

Cenelec

EN 60745-2-23:2013

Hand-held motor-operated electric tools — Safety — Part 2-23: Particular requirements for die grinders and small rotary tools

IEC 60745-2-23:2012 (Modified)

28.11.2013

 

 

Cenelec

EN 60947-5-3:2013

Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

IEC 60947-5-3:2013

11.4.2014

 

 

Cenelec

EN 60947-5-5:1997

Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function

IEC 60947-5-5:1997

28.11.2013

 

 

 

EN 60947-5-5:1997/A1:2005

IEC 60947-5-5:1997/A1:2005

28.11.2013

 

Date expired

(28.11.2013)

 

EN 60947-5-5:1997/A11:2013

28.11.2013

 

3.12.2015

Cenelec

EN 61029-1:2009

Safety of transportable motor-operated electric tools — Part 1: General requirements

IEC 61029-1:1990 (Modified)

18.12.2009

 

 

 

EN 61029-1:2009/AC:2009

 

 

 

 

EN 61029-1:2009/A11:2010

8.4.2011

 

Date expired

(28.11.2013)

Cenelec

EN 61029-2-1:2012

Safety of transportable motor-operated electric tools — Part 2-1: Particular requirements for circular saw benches

IEC 61029-2-1:1993 (Modified)

IEC 61029-2-1:1993/A1:1999

IEC 61029-2-1:1993/A2:2001

5.4.2013

EN 61029-2-1:2010

3.9.2015

Cenelec

EN 61029-2-3:2011

Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers

IEC 61029-2-3:1993 (Modified)

IEC 61029-2-3:1993/A1:2001

18.11.2011

 

 

Cenelec

EN 61029-2-4:2011

Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders

IEC 61029-2-4:1993 (Modified)

IEC 61029-2-4:1993/A1:2001 (Modified)

18.11.2011

 

 

Cenelec

EN 61029-2-6:2010

Safety of transportable motor-operated electric tools — Part 2-6: Particular requirements for diamond drills with water supply

IEC 61029-2-6:1993 (Modified)

20.10.2010

 

 

Cenelec

EN 61029-2-8:2010

Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders

IEC 61029-2-8:1995 (Modified)

IEC 61029-2-8:1995/A1:1999

IEC 61029-2-8:1995/A2:2001

20.10.2010

 

 

Cenelec

EN 61029-2-9:2012

Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws

IEC 61029-2-9:1995 (Modified)

5.4.2013

EN 61029-2-9:2009

3.9.2015

 

EN 61029-2-9:2012/A11:2013

28.11.2013

 

12.8.2016

Cenelec

EN 61029-2-10:2010

Safety of transportable motor-operated electric tools — Part 2-10: Particular requirements for cutting-off grinders

IEC 61029-2-10:1998 (Modified)

20.10.2010

 

 

 

EN 61029-2-10:2010/A11:2013

28.11.2013

 

22.7.2016

Cenelec

EN 61029-2-11:2012

Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws

IEC 61029-2-11:2001 (Modified)

5.4.2013

EN 61029-2-11:2009

3.9.2015

 

EN 61029-2-11:2012/A11:2013

28.11.2013

 

12.8.2016

Cenelec

EN 61029-2-12:2011

Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines

IEC 61029-2-12:2010 (Modified)

18.11.2011

 

 

Cenelec

EN 61310-1:2008

Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals

IEC 61310-1:2007

18.12.2009

 

 

Cenelec

EN 61310-2:2008

Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking

IEC 61310-2:2007

18.12.2009

 

 

Cenelec

EN 61310-3:2008

Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators

IEC 61310-3:2007

18.12.2009

 

 

Cenelec

EN 61496-1:2013

Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests

IEC 61496-1:2012

11.4.2014

EN 61496-1:2004

10.5.2015

Cenelec

EN 61800-5-2:2007

Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional

IEC 61800-5-2:2007

18.12.2009

 

 

Cenelec

EN 62061:2005

Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems

IEC 62061:2005

26.5.2010

 

 

 

EN 62061:2005/AC:2010

 

 

 

 

EN 62061:2005/A1:2013

IEC 62061:2005/A1:2012

28.11.2013

 

18.12.2015

 

English